DIN Rail Power Supplies
DIN rail power supplies are widely used in Factory Automation, Transportation Automation, Public Utility Automation, Building Automation, and Home Automation applications. Our wide range of Mean Well DIN Rail power supplies meets the majority of demands in these applications. HDR/MDR/EDR/NDR/TDR series are our best cost performance series whereas our premium series SDR and WDR are available for critical applications.
DC UPS & Redundancy System
Both the redundant power supply system and the DC UPS system serve a purpose in the industrial control panel. Using the Mean Well DR-RDN series in the redundant power supply system is a cost effective way for industrial applications like food & beverage packaging, material handling or conveyors to always operate during standard hours of manufacturing. It helps eliminate any down time due to component failure. If the system has a critical memory component or must finish a process during a power outage, then the DR-UPS and DRC series should be used. The UPS system will keep the equipment up and running until proper save operation and safe shut down mode can be reached.
KNX & Building Automation
The demand for versatility in the management of heating, lighting and access control systems for a family home as well as an office complex is growing. At the same time, the efficient use of energy is becoming increasingly important. People want a comfortable, sustainable and safe place to live and work and that’s where automation jumps in. Wellforces provides KNX bus power supplies such as KNX-20E and KNX-40E to meet these kinds of application requirements. HDR series, is acompact and high efficiency power supply and is suitable to be installed in intelligent systems to provide power for all kinds of applications, such as building safety, surveillance, video, audio etc. We have a full range of power supplies, and you can combine them with our KNX products to achieve a smart building system.
DC/DC Converters
DC-DC converters are commonly used to improve system isolation, system wiring voltage, reduce compensation, and system security. For enclosed type DC-DC converters, we have the Mean Well SD and RSD series with a complete wattage range of 15W-1000W. The DIN rail type DDR series is generally used in Railway & ITE applications. PCB, On Board and Module types are also available for small wattage designs and applications.