Over 15 years experience of providing support of MEAN WELL Power Supplies
LTECH SE-12-100-400-G1T 12W 100mA ~ 400mA CC Triac LED Driver
Log in to see priceOverview
SE-12-100-400-G1T is the 9-42Vdc output model of this series.
Features
- Adopt SAMSUNG/COVESTRO V0 flame resistant polycarbonate protective housings with small size and light weight.
- The clamshell design and screwless type for strain-relief, tensile strength of wires complies with the 0.5~1.5mm²wire diameter 60N tensile test
- Complies with the tensile test standard GB7000.1-2015/IEC60598-1:2014.
- Support Leading edge (Triac), Trailing edge (ELV)
- Soft-on and fade-in dimming function enhances your visual comfort.
- T-PWM dimming technology allows continuous and flicker-free images under high-speed shooting.
- Dimming from 0~100%, down to 0.1%.
- 0-100% flicker-free dimming with high frequency exemption level.
- Innovative thermal management technology protects the power life intelligently.
- Multi-current & wide voltage, suitable for different power LEDs.
- Class 2 LED driver, full protective plastic housing.
- Comply with Safety Extra Low Voltage standard.
- Overvoltage, overload, short circuit protection and automatic recovery.
- Suitable for indoor light applications of I / II / III type.
- Up to 50000-hour life time.
- 5-year warranty (Rubycon capacitor).
Specifications
OUTPUT
- Output Voltage
- 9-42Vdc
- Output Current
- 100-400mA
- Load Power Range
- 0.9W-12W
- Strobe Level
- No visible flicker/High frequency exemption level
- Dimming Range
- 0-100%, down to 0.1%
- LF Current Ripple(-120Hz)
- <3%
- Current Accuracy
- ±5%
- Ripple & Noise
- <4V
- PWM Frequency
- 3600Hz
INPUT
- Dimming Interface
- Triac leading edge/ELV trailing edge
- Input Voltage Range
- 220-240Vac
- Frequency
- 50/60Hz
- Input Current
- <0.09A/230Vac
- Power Factor
- PF>0.9/230Vac (Full load)
- Efficiency
- >78%@300mA
- Inrush Current (typ.)
- Cold start10A@230Vac (Test twidth=200 us tested under50% Ipeak)
- Anti Surge
- L-N: 1KV
- Leakage Current
- <0.5mA/230Vac
ENVIRONMENT
- Working Temperature
- ta: -20 ~ 45°C tc: 90°C
- Working Humidity
- 20 ~ 95%RH, non-condensing
- Storage Temperature, Humidity
- -40 ~ 80°C, 10 ~ 95%RH
- Temperature Coefficient
- ±0.03%/°C (-20°C ~ 45°C)
- Vibration
- 10-500HZ, 2G 12min/1cycle, 72 min for X, Y and Z axes respectively.
PROTECTION
- Overload Protection
- Shut down the output and recover automatically once it exceeds 1.02-1.35 times of the rated power.
- Overheat Protection
- Intelligently adjust or turn off the current output if the PCB temperature ≥110°C. When the PCB temperature <90°C, automatically recover normal output.
- Short Circuit Protection
- When short circuit occurs, shut down the output and recover automatically.
SAFETY & EMC
- Withstand Voltage
- I/P-O/P:3750Vac
- Insulation Resistance
- I/P-O/P:500Vdc/25°C/70%RH≥100MΩ
- Safety Standards
-
Parameter Standard Test Level CCC China GB19510.1, GB19510.14 TUV Germany EN61347-1, EN61347-2-13, EN62493 CE European Union EN61347-1, EN61347-2-13, EN62384 KC Korea KC61347-1, KC61347-2-13 RCM Australia AS61347-1, AS61347-2-13 ENEC Europe EN61347-1, EN61347-2-13, EN62384 CB CB member states IEC61347-1, IEC61347-2-13 EAC Russia IEC61347-1, IEC61347-2-13 - EMC Emission
-
Parameter Standard Test Level CCC China GB/T17743, GB17625.1 CE European Union EN55015, EN61000-3-2, EN61000-3-3, EN61547 KC Korea KN15, KN61547 RCM Australia EN55015, EN61000-3-2, EN61000-3-3, EN61547 EAC Russia IEC62493, IEC61547, EH55015 - EMC Immunity
- EN61000-4-2,3,4,5,6,8,11, EN61547
- Strobe Test Standard
- IEEE 1789
OTHERS
- Dimensions
- 111×35×20mm(L×W×H)
- Packing
- 122×36×22mm(L×W×H)
- Weight(G.W.)
- 77.5g±10g
Certifications & ratings
- T-PWM
- Super depth dimming technology
- Marked features
- Triac ELV, Multiple Current
Downloads
Datasheet1
FAQ
What kind of LED applications is the LTECH SE-12-100-400-G1T designed for?
This model is a constant-current Triac LED driver intended for LED lighting applications that need phase-cut dimming. Its 12W rating and 100mA to 400mA current range make it relevant for low-power commercial or architectural LED fixtures that require a dedicated constant-current driver.
Is the SE-12-100-400-G1T a constant-current or constant-voltage LED driver?
The SE-12-100-400-G1T is a constant-current LED driver. That makes it different from constant-voltage power supplies used for products that expect a fixed voltage output rather than a regulated LED drive current.
Does this LED driver support Triac or phase-cut dimming?
Yes. This model is specifically identified as a Triac LED driver and lists AC phase-cut dimming control. It is intended for applications where phase-cut dimming is required rather than non-dimming use only.
What are the main electrical specifications of the LTECH SE-12-100-400-G1T?
This model is rated at 12W and is identified as a 100mA to 400mA constant-current LED driver. The product data lists an output voltage range of 9-42Vdc (max 50V), which helps define the operating range for compatible LED loads.
What temperature range is this LED driver rated for?
The listed ambient operating temperature range is -20°C to 45°C. That makes it better suited to environments that stay within that range during normal use.
What housing and durability features does this model include?
The product description states that it uses a V0 flame-resistant polycarbonate housing from SAMSUNG/COVESTRO. It is also described as compact and lightweight, with a design focused on protective housing and visual comfort features such as soft-on and fade-in dimming.
What warranty is offered for the SE-12-100-400-G1T?
The listed warranty period for this model is 5 years. That is useful for buyers evaluating it for longer-life LED lighting projects where warranty coverage matters.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SE-12 Models
1 other model| Model | Power | Voltage | Current | IP Rating | |
|---|---|---|---|---|---|
| Ltech SE-12-100-400-W1A 12W 100mA ~ 400mA CC 0-10V LED Driver | 12W | 22V | 100 Milliampere | IP20 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
