💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well ODLC-45A-700 Power Supply 45W 700mA (Auxiliary DC output)

SKU ODLC-45A-700
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

ODLC-45A-700 is the model of this series: rated current 700mA, rated power 44.8W, typical efficiency 85%.

ODLC-45 series is a 45W LED AC/DC driver featuring the constant current mode output with flicker free design.ODLC-45 operates from 90~295VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the fanless design, the entire series is able to operate for -20℃~+85℃ case temperature under free convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLC-45 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.

Features

  • Constant Current mode output
  • Flicker free design
  • Plastic housing with class II design
  • Built-in active PFC function
  • No load power consumption<0.5W(Blank-Type), Standby power consumption<0.5W(DA-Type)
  • IP67 rating for indoor or outdoor installations
  • Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output; DALI
  • 3 years warranty

Specifications

ODLC-45A-700Specifications from the official datasheet (2022-04-12 edition)

OUTPUT

RATED CURRENT
700mA
RATED POWER
44.8W
CONSTANT CURRENT REGIONNote.2
38 ~ 64V
OPEN CIRCUIT VOLTAGE(max.)
84V
CURRENT RIPPLE
5% max. @rated current
CURRENT TOLERANCE
±7.0%
SETUP TIMENote.4
500ms / 230VAC 1200ms/115VAC
AUXILIARY DC OUTPUTNote.5
Nominal 12V(deviation 11.4~12.6)@50mA for ODLC-45A only

INPUT

VOLTAGE RANGENote.3
90 ~ 295VAC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION
THD< 20%(@load≧60%/230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section)
EFFICIENCY (Typ.)
85%
AC CURRENT
0.6A/115VAC 0.4A/230VAC 0.3A/277VAC
INRUSH CURRENT (Typ.)
COLD START 30A(twidth=100μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
NO LOAD/STANDBY POWER CONSUMPTION
No load power consumption<0.5W for Blank-Type,<1.2W for ODLC-45A Standby power consumption<0.5W for DA-Type

PROTECTION

SHORT CIRCUIT
Hiccup mode,auto-recovery after fault condition is removed for DA type; Hiccup mode,re-power on to recovery for other type

ENVIRONMENT

WORKING TEMP.
Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.
Tcase=+85℃
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 40℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
UL8750(type”HL”),CSA C22.2 NO.250.13-12;ENEC BS EN/EN61347-1 & BS EN/EN61347-2-13 independent, BS EN/EN62384; BIS IS15885( for ODLC-45-700,1050,700DA,1050DA only), EAC TP TC 004,IP67 approved
DALI STANDARDS
Compliance to IEC62386-101, 102 for DA-Type only
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≧60%) ; BS EN/EN61000-3-3, GB17743,GB17625.1,EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level(surge immunity: Line-Line:1KV),EAC TP TC 020

OTHERS

MTBF
3513.4K hrs min. Telcordia SR-332 (Bellcore) ;340.8K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
111*77*28.5mm(L*W*H)
PACKING
0.42Kg; 24pcs/ 11Kg/ 0.72CUFT
Test conditions and notes10
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
  2. 2. Please refer to "DRIVING METHODS OF LED MODULE".
  3. 3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
  4. 4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.
  5. 5. Aux. 12V will be damaged with short circuit; It will not be available when output voltage is not in constant current region or output no load condition.
  6. 6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
  7. 7. The DALI version driver does not support the bit 1: Lamp failure in the Command 144 Query status of the DALI standard.
  8. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  9. 9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
  10. 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.

Technical drawings

ODLC-45A-700 Block Diagram
Block Diagram
ODLC-45A-700 DIMMING OPERATION
DIMMING OPERATION
ODLC-45A-700 OUTPUT LOAD vs TEMPERATURE
OUTPUT LOAD vs TEMPERATURE
ODLC-45A-700 STATIC CHARACTERISTIC
STATIC CHARACTERISTIC
ODLC-45A-700 TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION
ODLC-45A-700 MECHANICAL SPECIFICATION
MECHANICAL SPECIFICATION

Typical applications

  • LED panel lighting
  • LED flood lighting
  • Indoor LED lighting
  • Industrial lighting

Downloads

FAQ

Can I use the ODLC-45A-700 for a 700mA LED downlight?

Yes, this model is intended for constant current LED loads at 700mA. It fits downlights whose LED forward voltage falls within 38-64V and whose total power stays within 44.8W.

Is the ODLC-45A-700 suitable for a medium-voltage small LED array?

It is a fit for small LED arrays that require 700mA constant current and operate within 38-64V. That makes it a middle-range option between the lower-current 350mA and 500mA versions and the higher-current 1050mA and 1400mA versions.

Can this driver be used for constant current signage modules?

Yes, if the signage module or light engine is specified for 700mA constant current operation. It is not intended for constant voltage LED products, since the LED output is regulated as constant current over a 38-64V range.

What should I check before pairing LEDs with the ODLC-45A-700?

The LED assembly must be designed for 700mA constant current and have a combined forward voltage within 38-64V. The number of LEDs depends on each LED forward voltage, so compatibility should be verified from the LED electrical data rather than a fixed LED count.

Is the ODLC-45A-700 suitable for outdoor or exposed locations?

Its IP67 waterproof rating supports use where dust and water resistance are required. The specified operating range of -20°C to +85°C also makes it suitable for demanding ambient conditions.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8421000282411, "variants" :[{ "context":"default", "variant_id": 45622361915691, "sku":"ODLC-45A-700", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well

Mean Well ODLC-45A-700 Power Supply 45W 700mA (Auxiliary DC output)

ODLC-45A-700 is the model of this series: rated current 700mA, rated power 44.8W, typical efficiency 85%.

ODLC-45 series is a 45W LED AC/DC driver featuring the constant current mode output with flicker free design.ODLC-45 operates from 90~295VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the fanless design, the entire series is able to operate for -20℃~+85℃ case temperature under free convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLC-45 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.

Features

  • Constant Current mode output
  • Flicker free design
  • Plastic housing with class II design
  • Built-in active PFC function
  • No load power consumption<0.5W(Blank-Type), Standby power consumption<0.5W(DA-Type)
  • IP67 rating for indoor or outdoor installations
  • Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output; DALI
  • 3 years warranty

Typical applications

  • LED panel lighting
  • LED flood lighting
  • Indoor LED lighting
  • Industrial lighting
View product