Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

BOKE BK-DUL040-B1050ADF 40W DALI-2 LED Driver

0.60–1.05A via DIP switchDALI-2push dim and 1-10V/PWMflicker-freeCLO and corridor dimNFC setting

SKU BK-DUL040-B1050ADF

Log in to see price Trade pricing & online ordering for account holders

In stock

Overview

BK-DUL040-B1050ADF is the model of this series: typical efficiency 89% ,see the electrical values below for details.

Features

Support DALI-2+pushDIM+1-10V/10V PWM/Rx dimming mode
Support advanced functions such as corridorDIM,EL, CLO
The output current programming can be realized through the DALI interface and the NFC interface
Multi-level current output can be realized by DIP-switch
Soft dimming and flicker-free at any brightness, meets the new requirements of ErP certification
Using HPC patented technology, at any dimming level, the brightness of the lights is the same
Dimming range 1~100%, output current accuracy 2%
Standby power input<0.5W, meets the requirements of ErP certification
High PF, high efficiency, low THD
Screw-free and pressing type strain relief, supports thicker cables and is easier to install
Intelligent LED hot-plug protection function
SELV and Class II design, suitable for use outside of the luminaires
Compliance with CE,ENEC,UKCA,RCM,CCC,DALI-2 and other certifications
IP20 protection grade, indoor use
Nominal life-time up to 100,000 h
5-year guarantee

Specifications

BK-DUL040-B1050ADFSpecifications from the official datasheetDownload datasheet PDF

Product model

Product model: BK-DUL040-B1050ADF

Output parameters

Regulation method: Constant Current
Rated output current range: 0.6-1.05A,see the DIP-switch for details
Rated output voltage range: 6-42VDC,see the DIP-switch for details
Rated output power: 40W Max,see the DIP-switch for details
Output current adjustment: DIP S.W(10 levels)
Output current ripple LF: ±2%
Output current accuracy: ±2%
Linear regulation: ±1%
Load regulation: ±1%
No load output voltage: 50VDC
Flicker-free(typical): Flickering percent(IEEE 1789)=0.111%(100Hz), Flicker index(IEEE 1789)=0.000(100Hz), Pst LM = 0.02, SVM = 0.003

Input parameters

Rated input voltage range: 200-240VAC/DC
Input voltage range: 180-264VAC/DC
Input votage shock: <380 V AC
Input current: <0.24A (Rated input voltage)
Input frequency: 0/50/60Hz
Input PF/Input DF(typical): PF: 0.97, DF:0.97
Input THD(typical): 8.5%
Efficiency(typical): 89%
In-rush current(typical): 7.1A peak, 186us duration(50 % Ipeak)
Start/Switchover/Turn off: <0.7s(AC start),<0.7s(DC start),<0.3s(AC/DC switchover),<0.5s(Turn off )
Switching cycles: > 100,000 switching cycles
Power consumption(typical): Full load(Pin):45.7W, On stand-by(Psb) : <0.5W

Safety

Withstand voltage: I/P-O/P(LED):3750V AC, I/P-DALI: 1500V AC, O/P-DALI: 1500V AC.
Mains surge capability: L-N:2KV(90°/270°, 5 times each with an interval of 60s)(Performance criterion:A)
Leakage current(typical): 0.33mA
Isolation resistance: I/P-O/P:100MΩ/500Vdc/25℃/70% RH

Control interface

DALI dimming port: Voltage range: 9.5-22.5V, typical 16V, interface current consumption: 1.8mA
pushDIM dimming port: Voltage range: 180-264V 47/63Hz
1-10V dimming port(Non-isolated): Voltage range: 0-10V, Maximum output current: ≤0.3mA
Auxiliary power supply: N/A
Dimming range: 1-100%
Dimming drive mode: AM(amplitude modulation)

Emergency support

Central emergency system: Supported
Self-contained emergency: Supported

Environment & Life time

Operating temperature: Ta=-20-45℃
Case temperature: Tc=90℃
Operating humidity: 5-85% RH, not condensed
Storage temp./humidity: -40-80℃, 5-85% RH, not condensed
IP grade: IP20
MTBF: 500,000H,MIL-HDBK-217F(25℃)
Life-time: Nominal life-time up to 100,000 h
Vibration resistant: 10~500Hz,5G 12min./1cycle,period for 72min. each along X,Y,Z axes
Acoustic Noise: <25dB(30cm, Normal operation)
Environmental protection: RoHS

Others

Warranty: 5-year guarantee
Dimension: L137*W46*H30mm

Certifications and standards

Compliance certifications: CE, ENEC, UKCA, RCM, CCC, EL, DALI-2
Safety: EN61347-1, EN61347-2-13, EN62384
EMC: EN55015, EN61000-3-2 , EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547
DALI-2: IEC 62386-101(DALI-2), IEC 62386-102(DALI-2), IEC 62386-207(DALI-2)
EL: Compatible IEC 61347-2- 13 Annex J, compatible with EN 60598-2-22 and EN 50172
RF: N/A

Certifications & ratings

Marked features: 0/1...10VDC, PWM signal, R0...100KΩ, EasySet, corridorDIM, CLO

Test conditions and notes2

1.By default, all parameter are measured at 230VAC input, 50Hz, full load and 25℃ of ambient temperature.
2.The driver can not be installed inside the light. when the driver is used with the light, the EMC of the whole light needs to be tested.

Technical drawings

BK-DUL040-B1050ADF Electrical values — Electrical values

BK-DUL040-B1050ADF THD vs. Load — THD vs. Load

BK-DUL040-B1050ADF Expected life-time — Expected life-time

BK-DUL040-B1050ADF --It means that this channel is OFF. — --It means that this channel is OFF.

BK-DUL040-B1050ADF Optionalaccessories（Seethepartsspecificationfordeta… — Optionalaccessories（Seethepartsspecificationfordeta…

BK-DUL040-B1050ADF Wiring diagram — Wiring diagram

BK-DUL040-B1050ADF Switch to the DALI dimming mode — Switch to the DALI dimming mode

BK-DUL040-B1050ADF Outputcurrent(%) — Outputcurrent(%)

BK-DUL040-B1050ADF pushDIM dimming application — pushDIM dimming application

BK-DUL040-B1050ADF 1-10V/10VPWMdimmingapplication — 1-10V/10VPWMdimmingapplication

BK-DUL040-B1050ADF Switchtothe1-10V/10VPWMdimmingmode — Switchtothe1-10V/10VPWMdimmingmode

BK-DUL040-B1050ADF 100Kpotentiometerdimmingapplication — 100Kpotentiometerdimmingapplication

BK-DUL040-B1050ADF Dimmingcurve — Dimmingcurve

BK-DUL040-B1050ADF corridorDIM dimming application — corridorDIM dimming application

Typical applications

Suitable for lights with independent drivers such as downlights, spotlights, panel lights, etc
LED indoor lighting
LED office lighting
LED commercial lighting

Downloads

Datasheet1

BK-DUL040-B1050ADF datasheetBK_DUL040_B1050ADF.pdf PDF Download

FAQ

What is this driver used for?

It is a constant current LED driver designed for indoor lighting applications, supporting DALI-2, pushDIM, and 1-10V dimming control.

What are the output voltage and current specifications?

The rated output voltage range is 6-42VDC and the rated output current range is 0.6-1.05A, adjustable via DIP switches. The maximum output power is 40W.

What is the required input voltage?

The unit requires an input voltage range of 180-264VAC/DC, with a rated input of 200-240VAC/DC. It supports both AC and DC input.

How does the dimming work?

It supports DALI-2, pushDIM, and 1-10V dimming with a range of 1-100%. The dimming drive mode is amplitude modulation (AM).

What are the dimensions and mounting requirements?

The dimensions are L137*W46*H30mm. It has an IP20 rating, meaning it is suitable for indoor use only and must be installed in a protected enclosure.

What is the operating temperature range?

The operating ambient temperature (Ta) is -20 to 45°C, and the maximum case temperature (Tc) is 90°C.

What is the warranty period?

The product comes with a 5-year guarantee.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":15122345984366, "variants" :[{ "context":"default", "variant_id": 54275858366830, "sku":"BK-DUL040-B1050ADF", "inventory_qty" : 41, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }