Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SCW12W8-15 DC-DC Converter - 12W 9~75V DC in 15V out 800mA

8:1(9~75VDC) ultra-wide input rangeno minimum load required3KVdc I/O isolation

SKU SCW12W8-15

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SCW12W8-15 is the 15V output model of this series: rated power 12W, typical efficiency 87%.

SCW12W8 and DCW12W8 series are 12W isolated and regulated module type DC-DC converter with DIP24 package. It features international standard pins, a high efficiency up to 87%, wide working temperature range -40~+85℃, 3KVdc I/OP-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components, continuous-mode short circuit protection, 8:1(9~75V) ultra-wide input range, and various output voltage, 3.3V/5V/9V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

DIP24 package with industry standard pinout
8:1(9~75Vdc) ultra-wide input range
Operating temperature range -40 ~ +85℃
No minimum load required
Comply to BS EN/EN55032 radiated Class A without additional components
High efficiency up to 87%
Protections: Short circuit (Continuous) / Overload / Over voltage / UVLO
Remote ON/OFF control
3KVdc I/O isolation
3 years warranty

Specifications

SCW12W8-15Specifications from the official datasheet (2025-07-17 edition)Download datasheet PDF

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE): Nominal 12V, 24V,36V,48V,72V (9 ~ 75V)
INPUT CURRENT NO LOAD: 10mA
INPUT CURRENT FULL LOAD: 575mA
OUTPUT VOLTAGE: 15V
OUTPUT CURRENT: 800mA
EFFICIENCY (TYP.): 87%
CAPACITOR LOAD (MAX.)^{* For each output}: 220μF

INPUT

VOLTAGE RANGE: 9~75Vdc
SURGE VOLTAGE (100ms max.): 100Vdc
FILTER: Pi type
PROTECTION (Typ.): Fuse recommended. 4A Slow-Blow Type

OUTPUT

VOLTAGE ACCURACY: ±2%
RATED POWER: 12W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: ±0.5%
LOAD REGULATION^Note.4: ±1% for 3.3Vo, ±0.5% for others
CROSS DEGUIATION: ±5% @ 25%~100% Load only for dual output
SWITCHING FREQUENCY (Typ.): 300KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 110 ~ 230% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: Protection type : Clamp by TVS diode
UNDER VOLTAGE LOCKOUT (Typ.): Start-up voltage 8.8Vdc Shutdown voltage 8Vdc

FUNCTION

REMOTE CONTROL: Power ON: R.C. ~ -Vin >2.5~30Vdc or open circuit ; Power OFF: R.C. ~ -Vin <1Vdc or short

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +85℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +110℃ max.
WORKING HUMIDITY: 5% ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.05% / ℃ (0 ~ 85℃)
SOLDERING TEMPERATURE: 1.5mm from case of 3 ~ 5sec./265℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC (Note.5)

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVdc
ISOLATION RESISTANCE: I/P-O/P:1000M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 1000pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 N/A
Radiated BS EN/EN55032 Class A without additional components Class B with additional components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV
Surge BS EN/EN61000-4-5 Level 2, 0.5KV Line-Line
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic field immunity BS EN/EN61000-4-8 Level 1, 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032	N/A
Radiated	BS EN/EN55032	Class A without additional components Class B with additional components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV
Surge	BS EN/EN61000-4-5	Level 2, 0.5KV Line-Line
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic field immunity	BS EN/EN61000-4-8	Level 1, 1A/m

OTHERS

MTBF (Typ.): >860Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 31.8*20.3*12.2mm (1.25*0.8*0.48 inch)
CASE MATERIAL: Five-side Metal shielded case
PACKING: 17.5g ; 15pcs/per tube, 750pcs/50 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 0% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SCW12W8-15 DIMENSION (L*W*H) 31.8*20.3*12.2mm — DIMENSION (L*W*H) 31.8*20.3*12.2mm

SCW12W8-15 EMCSuggestionCircuit — EMCSuggestionCircuit

SCW12W8-15 EMCSuggestionCircuit (2) — EMCSuggestionCircuit (2)

SCW12W8-15 Pin Assignment — Pin Assignment

Typical applications

Downloads

Datasheet1

SCW12W8-15 datasheetSCW12W8_DCW12W8_Spec_Sheet.pdf · 2025-07-17 edition PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

What is the Mean Well SCW12W8-15 designed for?

The SCW12W8-15 is a 12W isolated DC-DC converter module for converting a wide DC input to a regulated 15V output. It is aimed at embedded, industrial, and OEM equipment where a compact DIP package and broad input tolerance are important.

What input voltage range does the SCW12W8-15 support?

This model accepts an ultra-wide 9 to 75V DC input range. That allows one part number to cover nominal 12V, 24V, 36V, 48V, and 72V DC system ranges, which can simplify product selection across mixed-platform equipment.

Is the SCW12W8-15 an isolated DC-DC converter?

Yes. The SCW12W8-15 provides 3KV DC input-to-output isolation, which is useful in equipment that needs electrical separation between the input side and the regulated 15V output side. That makes it a stronger fit for industrial and control applications than a non-isolated module.

Can the SCW12W8-15 operate in harsh temperature conditions?

This model is rated for operation from -40°C to +85°C, with output derating at higher ambient temperatures per Mean Well's derating curve. That wide temperature range makes it suitable for equipment exposed to cold starts, hot enclosures, or other demanding industrial environments, provided the overall system design stays within the product's ratings.

What protection features are included in the SCW12W8-15?

The SCW12W8-15 includes short circuit protection with continuous behavior, plus overload, over voltage, and UVLO protection. These built-in protections help improve robustness in demanding equipment and reduce the need to rely only on external protective measures.

How does the SCW12W8-15 help with EMC-conscious designs?

Mean Well states this model complies with BS EN/EN55032 radiated Class A without additional components. For B2B equipment builders, that can make it a more attractive option when compared with modules that need extra external parts just to reach the same radiated-emissions target.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":14812939583854, "variants" :[{ "context":"default", "variant_id": 52705270628718, "sku":"SCW12W8-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }