Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well DI06W8-15 8:1 Ultra-Wide Input DC-DC Regulated Converter, Dual Output 6W ±15V 200mA

SKU DI06W8-15

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

DI06W8-15 is the ±15V output model of this series: rated power 6W, typical efficiency 84.5%.

SI06W8 and DI06W8 series are 6W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 86%, wide working temperature range -40~+90℃, 3KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class A without additional components, continuous-mode short circuit, overload, Input under voltage protection etc. The models account input voltage 9~75V 8:1 ultra-wide input range, and various output voltage, 3.3V/5V/9V/12V/15V/24V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

DIP 1"x1" package with industry standard pinout
8:1 ultra-wide input range
Operating temperature range -40 ~ +90℃
No minimum load required
Comply to BS EN/EN55032 radiated Class A without additional components
High efficiency up to 86%
Protections: Short circuit (Continuous) / Overload / Over voltage / Input under voltage
3KVDC I/O isolation
Remote ON/OFF control (optional)
3 years warranty

Specifications

DI06W8-15Specifications from the official datasheet (2024-08-02 edition)

INPUT

VOLTAGE RANGE: 9 ~ 75Vdc
INPUT VOLTAGE (RANGE): Normal 12V,24V,36V,48V,72V (9 ~ 75V)
INPUT CURRENT NO LOAD: 11mA
INPUT CURRENT FULL LOAD: 300mA
SURGE VOLTAGE (100ms max.): 100Vdc
FILTER: Capacitor network
PROTECTION: Fuse recommended. 2A Slow-Blow Type

OUTPUT

OUTPUT VOLTAGE: ±15V
OUTPUT CURRENT: ±0~200mA
VOLTAGE ACCURACY: ±2%
RATED POWER: 6W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: ±0.2% (±0.5% for 3.3Vo)
LOAD REGULATION^Note.4: ±0.5%
SWITCHING FREQUENCY (Typ.): 300KHz (PWM)
EFFICIENCY (TYP.): 84.5%
CAPACITOR LOAD (MAX.)^{* For each output}: *100μF

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 110 ~ 230% rated output power Protection type : Recovers automatically after fault condition is removed
OVER VOLTAGE: Protection type : Clamp by TVS diode
UNDER VOLTAGE LOCKOUT Start-up voltage: 8.8V
UNDER VOLTAGE LOCKOUT Shutdown voltage: 8.5V

FUNCTION

REMOTE CONTROL (OPTIONAL): Power ON: RC ~ -Vin > 2.5Vdc ~ 6Vdc or open circuit Power OFF: RC ~ -Vin <1Vdc or short

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃ max.
WORKING HUMIDITY: 5% ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.05% / ℃ (0 ~ 71℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC (Note.5)

SAFETY STANDARDS: EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVDC
ISOLATION RESISTANCE: I/P-O/P:1000M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 1000pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032(CISPR32) N/A
Radiated BS EN/EN55032(CISPR32) Class A without external components Class B with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 contact ±4KV
Radiated Susceptibility BS EN/EN61000-4-3 3V/m
EFT/Burest BS EN/EN61000-4-4 ±0.5KV
Surge BS EN/EN61000-4-5 Line-Line±0.5KV
Conducted BS EN/EN61000-4-6 3Vrms
Magnetic field immunity BS EN/EN61000-4-8 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032(CISPR32)	N/A
Radiated	BS EN/EN55032(CISPR32)	Class A without external components Class B with external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	contact ±4KV
Radiated Susceptibility	BS EN/EN61000-4-3	3V/m
EFT/Burest	BS EN/EN61000-4-4	±0.5KV
Surge	BS EN/EN61000-4-5	Line-Line±0.5KV
Conducted	BS EN/EN61000-4-6	3Vrms
Magnetic field immunity	BS EN/EN61000-4-8	1A/m

OTHERS

MTBF: >400Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 25.4*25.4*10.2mm (1*1*0.401 inch)
CASE MATERIAL: Black coated copper with non-conductive base
PACKING: 20g; 10pcs/per tube, 600pcs/60 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 0% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

DI06W8-15 Mechanical Specification — Mechanical Specification

DI06W8-15 Plug Assignment — Plug Assignment

DI06W8-15 S I06W8 & D I06W8 series — S I06W8 & D I06W8 series

DI06W8-15 S I06W8 & D I06W8 series (2) — S I06W8 & D I06W8 series (2)

Typical applications

Downloads

Datasheet1

DI06W8-15 datasheetSI06W8_spec.pdf · 2024-08-02 edition PDF Download

FAQ

What is the Mean Well SI06W8-03 designed for?

The Mean Well SI06W8-03 is a regulated DC-DC converter intended for applications that need a stable 3.3V DC output from a very wide DC input range. Its 6W power rating and compact DIP 1 inch by 1 inch package make it suitable for space-constrained industrial and embedded equipment.

What makes the SI06W8-03 different from standard DC-DC converters?

This model stands out for its 8:1 ultra-wide input range, which gives designers more flexibility when input voltage can vary across systems or platforms. It also combines that range with regulated single-output 3.3V performance, up to 86% efficiency, and 3KVDC input-to-output isolation.

What are the key electrical specifications of the SI06W8-03?

The SI06W8-03 is a single-output regulated DC-DC converter rated for 6W with a 3.3V DC output. It features an 8:1 ultra-wide input range, up to 86% efficiency, and 3KVDC input-to-output isolation.

Can the SI06W8-03 operate in demanding temperature conditions?

Yes. This converter is specified for operation from -40°C to +90°C, which makes it suitable for equipment exposed to both low and elevated ambient temperatures. Buyers should still confirm that the full system design stays within the product's rated operating conditions.

Does the SI06W8-03 include built-in protection features?

Yes. Mean Well specifies protection for short circuit, overload, over temperature, over voltage, and input under voltage on this model. These protections can help improve resilience in industrial and OEM applications where power stability and fault tolerance matter.

Is the SI06W8-03 suitable for noise-sensitive or compliance-focused equipment?

It can be a strong fit for designs where EMC performance is important because it complies with BS EN/EN55032 radiated Class A without additional components. That can simplify product selection for commercial or industrial systems that need a compact isolated converter with solid baseline emissions performance.

Does the SI06W8-03 require a minimum load to regulate properly?

No. Mean Well lists this model as requiring no minimum load, which can be useful in systems where load conditions vary or may be very light during standby operation. That gives more flexibility than converters that only perform correctly above a defined minimum load.

What warranty is offered for the SI06W8-03?

The SI06W8-03 includes a 3-year warranty from Mean Well. For B2B buyers, that can be helpful when evaluating lifecycle support and supplier reliability for repeat-use designs.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well DI06W8-12 8:1 Ultra-Wide Input DC-DC Regulated Converter, Dual Output 6W ±12V 250mA	6W	12V	0.25A	IP20	View
Mean Well DI06W8-05 8:1 Ultra-Wide Input DC-DC Regulated Converter, Dual Output 6W ±5V 600mA	6W	5V	0.6A	IP20	View

Please log in to write a review.

{ "id":14858714448238, "variants" :[{ "context":"default", "variant_id": 52916294353262, "sku":"DI06W8-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }