Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well HRP-100-5 Power Supply 85W 5V 17A

built-in active PFChigh efficiency up to 90%no load power consumption <0.5W~0.75W

SKU HRP-100-5

Log in to see price Trade pricing & online ordering for account holders

Select model — 7 in this family

HRP-100-5

HRP-75-5 75W 5V Backorder

HRP-100-5 100W 5V Backorder

HRP-150-5 150W 5V Backorder

HRP-200-5 200W 5V Backorder

HRP-300-5 300W 5V Low stock

HRP-450-5 450W 5V Backorder

HRP-600-5 600W 5V Backorder

Product variants

Available to order

Overview

HRP-100-5 is the 5V output model of this series: rated current 17A, rated power 85W, typical efficiency 83%.

Features

Universal AC input / Full range
Built-in active PFC function
High efficiency up to 90%
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Protections: Over temperature (optional)
Cooling by free air convection
1U low profile 38mm
Built-in remote ON-OFF control
No load power consumption<0.5W
All using 105℃ long life electrolytic capacitors
5 years warranty

Specifications

HRP-100-5Specifications from the official datasheet (2026-04-03 edition)

OUTPUT

DC VOLTAGE: 5V
RATED CURRENT: 17A
CURRENT RANGE: 0 ~ 17A
RATED POWER: 85W
RIPPLE & NOISE (max.)^Note.2: 80mVp-p
VOLTAGE ADJ. RANGE: 4.75 ~ 5.8V
VOLTAGE TOLERANCE^Note.3: ±2.5%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±2.0%
SETUP, RISE TIME: 2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load
HOLD UP TIME (Typ.): 50ms/230VAC 20ms/115VAC at full load

INPUT

VOLTAGE RANGE^Note.5: 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.95/230VAC PF>0.98/115VAC at full load
EFFICIENCY (Typ.): 83%
AC CURRENT (Typ.): 1.1A/115VAC 0.6A/230VAC
INRUSH CURRENT (Typ.): 35A/115VAC 65A/230VAC
LEAKAGE CURRENT: <1mA / 240VAC

PROTECTION

OVERLOAD: 105 ~ 135% rated output power Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed
OVER VOLTAGE: 6 ~ 7V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

REMOTE CONTROL: RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off

ENVIRONMENT

WORKING TEMP.: -40 ~ +60℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.04%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC (Note 4)

SAFETY STANDARDS: UL62368-1,TUV BS EN/EN62368-1, AS/NZS62368.1, EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN55035, BS EN/ EN61000-6-2, heavy industry level, EAC TP TC 020

OTHERS

MTBF: 2344.3K hrs min. Telcordia SR-332 (Bellcore) ; 295.8K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 159*97*38mm (L*W*H)
PACKING: 0.56Kg; 24pcs/15Kg/0.9CUFT

Test conditions and notes6

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

HRP-100-5 Mechanical Specification — Mechanical Specification

HRP-100-5 Derating Curve — Derating Curve

Downloads

Certificates3

UL Certificate (HRP-100)(EN) PDF Download

TUV Certificate (HRP-100)(EN) PDF Download

EMC Certificate (HRP-100)(EN) PDF Download

Test reports1

Test Report (HRP-100-5)(EN) PDF Download

Catalogues1

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the HRP-100-5 for 5V industrial control electronics?

Yes, if the load needs a constant 5V DC supply and does not exceed 17A or 85W. It is intended for higher-current 5V equipment rather than devices that require a higher DC voltage.

Is the HRP-100-5 suitable for embedded computing or logic hardware that runs on 5V?

It can be used where a regulated 5V DC rail is required, provided the total load stays within 17A and 85W. That makes it appropriate for embedded hardware, controller assemblies, or digital electronics that are designed for 5V input.

Can this model support a 5V automation or HMI subsystem with relatively high current demand?

Yes. Compared with low-current 5V supplies, this unit delivers up to 17A at 5V, so it fits 5V subsystems with higher current requirements while remaining within 85W total output.

Would the HRP-100-5 work for a bench or fixture power source for 5V devices?

It can, as long as the equipment is designed for constant 5V input and stays inside the 17A, 85W rating. Its wide 85-264VAC input range is useful where the fixture may be powered from different AC mains conditions.

How does the HRP-100-5 differ from the other HRP-100 output versions?

The HRP-100 family spans 3.3V at 20A and 66W, 5V at 17A and 85W, 7.5V at 13.5A and 101.3W, 12V at 8.5A and 102W, 15V at 7A and 105W, 24V at 4.5A and 108W, 36V at 2.9A and 104.4W, and 48V at 2.2A and 105.6W. The HRP-100-5 is the 5V member with 17A output current.

Is the HRP-100-5 appropriate for indoor industrial environments with temperature swings?

Its operating temperature range is -40°C to +60°C, so it is specified for a broad range of ambient temperatures. An IP rating is not provided in the listed specs, so outdoor or wet-location use cannot be verified from the available data.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8343872438571, "variants" :[{ "context":"default", "variant_id": 45320900149547, "sku":"HRP-100-5", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well HRP-100-5 Power Supply 85W 5V 17A

Select model — 7 in this family

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

FUNCTION

ENVIRONMENT

SAFETY & EMC (Note 4)

OTHERS

Technical drawings

Downloads

Certificates3

Test reports1

Catalogues1

FAQ

Payment & Security

Write a review

Your cart

Mean Well HRP-100-5 Power Supply 85W 5V 17A

Features

Company Information

Services and Support

Choose options