Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well HRP-150-12 Power Supply 156W 12V 13A

built-in active PFChigh efficiency up to 90%no load power consumption <0.5W~0.75W

SKU HRP-150-12

Log in to see price Trade pricing & online ordering for account holders

Select model — 7 in this family

HRP-150-12

HRP-75-12 75W 12V Low stock

HRP-100-12 100W 12V Low stock

HRP-150-12 150W 12V Low stock

HRP-200-12 200W 12V Backorder

HRP-300-12 300W 12V Backorder

HRP-450-12 450W 12V Backorder

HRP-600-12 600W 12V Backorder

Product variants

In stock

Overview

HRP-150-12 is the 12V output model of this series: rated current 13A, rated power 156W, typical efficiency 88%.

Features

Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 89%
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 38mm
Built-in remote sense function
5 years warranty

Specifications

HRP-150-12Specifications from the official datasheet (2026-07-13 edition)

OUTPUT

DC VOLTAGE: 12V
RATED CURRENT: 13A
CURRENT RANGE: 0 ~ 13A
RATED POWER: 156W
RIPPLE & NOISE (max.)^Note.2: 120mVp-p
VOLTAGE ADJ. RANGE: 10.2 ~ 13.8V
VOLTAGE TOLERANCE^Note.3: ±1.5%
LINE REGULATION: ±0.3%
LOAD REGULATION: ±0.5%
SETUP, RISE TIME: 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.): 16ms/230VAC 16ms/115VAC at full load

INPUT

VOLTAGE RANGE^Note.5: 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.95/230VAC PF>0.99/115VAC at full load
EFFICIENCY (Typ.): 88%
AC CURRENT (Typ.): 1.7A/115VAC 0.9A/230VAC
INRUSH CURRENT (Typ.): 35A/115VAC 70A/230VAC
LEAKAGE CURRENT: <1mA / 240VAC

PROTECTION

OVERLOAD: 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE: 14.4 ~ 16.8V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -40 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -50 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.04%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC (Note 4)

SAFETY STANDARDS: UL62368-1,TUV BS EN/EN62368-1, AS/NZS62368.1, EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035 , BS EN/ EN61000-6-2 ,heavy industry level, EAC TP TC 020

OTHERS

MTBF: 1742.7K hrs min. Telcordia SR-332 (Bellcore) ; 238.9K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 159*97*38mm (L*W*H)
PACKING: 0.61Kg; 24pcs/15.6Kg/0.9CUFT

Test conditions and notes7

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. Strongly recommended that external output capacitance should not exceed 5000uF. (Only for: HRP-150-3.3/-5/-7.5/-12/-15)
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

HRP-150-12 Mechanical Specification — Mechanical Specification

HRP-150-12 Block Diagram — Block Diagram

HRP-150-12 Derating Curve — Derating Curve

Downloads

Certificates3

UL Certificate (HRP-150)(EN) PDF Download

TUV Certificate (HRP-150)(EN) PDF Download

EMC Certificate (HRP-150)(EN) PDF Download

Test reports1

Test Report (HRP-150-12)(EN) PDF Download

Catalogues1

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the HRP-150-12 for a 12V industrial automation panel or controller?

Yes, if the equipment requires constant 12V DC and the load stays within 13A and 156W. It is suited to higher-power 12V control applications compared with lower-output 12V models.

Is the HRP-150-12 suitable for 12V embedded systems with multiple connected loads?

It can be, because it provides 12V constant-voltage output at up to 13A with 156W total power. That gives more headroom for embedded or control assemblies with several 12V loads sharing one supply.

Can this model power a 12V HMI, relay, or control subsystem from standard AC input?

Yes. It accepts 85-264VAC input and delivers 12V DC output, so it fits 12V automation subsystems that need operation from a wide AC mains range.

Would the HRP-150-12 fit a 12V bench, fixture, or industrial test application?

It is appropriate where the fixture or test setup needs a regulated 12V supply and the total demand does not exceed 13A or 156W. The constant-voltage design is intended for equipment built around a fixed 12V DC input.

How does the HRP-150-12 compare with other HRP-150 output versions?

The listed HRP-150 models are 3.3V at 30A and 99W, 5V at 26A and 130W, 7.5V at 20A and 150W, 12V at 13A and 156W, 15V at 10A and 150W, 24V at 6.5A and 156W, 36V at 4.3A and 154.8W, and 48V at 3.3A and 158.4W. The HRP-150-12 is the 12V, 13A version in that range.

Is the HRP-150-12 suitable for hot or cold indoor industrial environments?

Its operating temperature range is -40°C to +70°C, with output derating at higher ambient temperatures as shown in the derating curve. No IP rating is included in the provided specs, so outdoor exposure or washdown use cannot be confirmed from this information alone.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current
Mean Well HRP-150-36 Power Supply 154.8W 36V 4.3A	154.8W	36V	4.3A	View

Please log in to write a review.

{ "id":8343873061163, "variants" :[{ "context":"default", "variant_id": 45320902967595, "sku":"HRP-150-12", "inventory_qty" : 8, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well HRP-150-12 Power Supply 156W 12V 13A

Select model — 7 in this family

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY & EMC (Note 4)

OTHERS

Technical drawings

Downloads

Certificates3

Test reports1

Catalogues1

FAQ

Payment & Security

Other HRP-150 Models

Write a review

Your cart

Mean Well HRP-150-12 Power Supply 156W 12V 13A

Features

Company Information

Services and Support

Choose options