Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HVGC-480-H-AB Power Supply 480W 2800mA - Adjustable and D...
Log in to see priceThe HVGC-480-H is a 480W Mean Well power converter (input range: 180~528VAC).
Key Features
- ✓ Input voltage range: 180~528VAC
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Cooling by free air convection
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP65 or IP67, EAC TP TC 004
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesHVGC Series
-
Power Rating480 Watt
-
Output Voltage180 Volt
-
Rated Current2.8 Ampere
-
Input Voltage180V~528V
-
Standards MetCB,CE,EAC,ENEC,FCC,UL
-
Operation ModeConstant Current
-
Operating Temperature-40°C~90°C
-
Warranty5 Year
-
Length26.2 cm
-
Width12.5 cm
-
Height4.38 cm
-
Weight2.72 kg
::specification::
Frequently Asked Questions
Can I use the HVGC-480-H-AB for high-current LED downlights?
This driver is intended for constant current LED downlights that require 2800mA and operate within the 68-171V CC range. With 480W available, it fits high-power fixtures better than lower-output drivers. It should not be used where the fixture expects constant voltage power.
Is the HVGC-480-H-AB a good match for LED signage modules with higher drive current?
It can be suitable for signage or display LED modules designed for 2800mA constant current operation and a total forward voltage inside 68-171V. The 480W rating supports larger loads than the smaller HVGC models. Because it is IP65 water-resistant, it is better suited to outdoor or damp locations than indoor-only drivers.
Can this model power a compact high-output LED array?
Yes, it is aimed at constant current LED arrays that need a relatively high 2800mA drive current rather than a very high output voltage. Its 68-171V CC range makes it more suitable for lower-voltage, higher-current arrays than the HVGC-480-L-AB. The array still needs to stay within the 480W power limit.
How do I check LED compatibility with the HVGC-480-H-AB?
Your LED load should be specified for 2800mA constant current, and the total LED forward voltage must fall within the 68-171V constant current range. The exact number of LEDs depends on the forward voltage of each LED, so it cannot be reduced to one fixed count. This is a constant current driver, not a constant voltage supply.
What is the difference between the HVGC-480-H-AB, HVGC-480-M-AB, and HVGC-480-L-AB?
All three models are 480W drivers in the same series, but they use different current and voltage ranges. The HVGC-480-H-AB is 2800mA with a 68-171V CC range, the HVGC-480-M-AB is 2100mA with a 92-228V CC range, and the HVGC-480-L-AB is 1400mA with a 137-343V CC range. The choice comes down to the current your LEDs require and the total forward voltage of the load.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other HVGC-480 Models
2 other models| Model | Power | Voltage | Current | IP Rating | |
|---|---|---|---|---|---|
| Mean Well HVGC-480-M-AB Power Supply 480W 2100mA - Adjustable and Dimmable | 480W | 240V | 2.1A | IP65 | View |
| Mean Well HVGC-480-L-AB Power Supply 480W 1400mA - Adjustable and Dimmable | 480W | 350V | 1.4A | IP65 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
