Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
TD-75-24-E1M1 is the 24Vdc output model of this series: typical efficiency 87%.
Features
- Support Leading edge (Triac), Trailing edge (ELV) and Push Dimmer.
- Built-in SCM, dimming curve and smoothing time can be customized.
- Dimming range from 0-100%, LED start at 0.1% possible.
- 0~100% flicker-free, achieve the level of high frequency exemption assessment.
- Short circuit / Over-heat / Over load / Over voltage protection, recover automatically.
- Compliant with Safety Extra Low Voltage standard.
- Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.
Specifications
OUTPUT
- Output Voltage
- 24Vdc
- Output Voltage Range:
- 24Vdc ± 0.5Vdc
- Output Current
- Max. 3.12A
- Output Power
- Max. 75W
- Output Power Range
- 0~75W
- Strobe Level
- High frequency exemption assessment level.
- Dimming Range:
- 0~100%, dimming depth: Max. 0.1%
- Overload Power Limitation
- ≥102%
- Ripple & Noise
- ≤200mV
- PWM Dimming Frequency
- ≤3600Hz
INPUT
- Dimming Interface
- Triac/ELV, Push DIM
- Input Voltage
- 200-240Vac
- Frequency
- 50/60Hz
- Input Current
- 230Vac≤0.8A
- Efficiency(typ.)
- 87%
- Inrush Current(typ.)
- Cold start 60A at 230Vac
- Anti Surge
- L-N: 1kV L/N-G: 2kV
- Leakage Current
- I/P-O/P: <0.5mA/230Vac, I/P-GND: <0.75mA/230Vac
ENVIRONMENT
- Working Temperature
- ta: -30°C ~ 60°C tc: 80°C
- Working Humidity
- 20 ~ 95%RH, non-condensing
- Storage Temp., Humidity
- -40°C ~ 80°C, 10~95%RH
- Temp. Coefficient
- ±0.03%/°C (0-50°C)
- Vibration
- 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes.
PROTECTION
- Over-heat Protection
- Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C. And the output current will be restored automatically when the temperature comes normal.
- Over Load Protection
- Power limit when rated power≥102%, auto recovers.
- Short Circuit Protection
- Shut down automatically if short circuit occurs, auto recovers.
- Over Voltage Protection
- Shut down the output when non-load voltage≥26V, re-power on to recover after fault condition is removed.
SAFETY & EMC
- Withstand Voltage
- I/P-O/P: 3750Vac I/P-GND: 1800Vac
- Isolation Resistance
- I/P-O/P: 100MΩ/500VDC/25°C/70%RH
- Safety Standards
- IEC/EN61347-1, IEC/EN61347-2-13
- Strobe Test Standard
- IEEE 1789
OTHERS
- Dimension
- 204×62×34mm(L×W×H)
- Packing
- 206×64×39mm(L×W×H)
- Weight(G.W.)
- 440g±10g
Certifications & ratings
- Dimming Depth
- 0.1%
Technical drawings
Downloads
FAQ
What is the output specification of the LTECH TD-75-24-E1M1?
The LTECH TD-75-24-E1M1 is a constant-voltage LED driver with a 24VDC output. It is rated for 75W maximum power and 3.12A rated current, making it suitable for 24V LED lighting applications that need phase-cut dimming support.
What dimming methods does this driver support?
This model supports both leading edge and trailing edge TRIAC dimmers. It also supports Push Dim control, giving more flexibility for projects that use phase-cut dimming methods.
Is the TD-75-24-E1M1 suitable for flicker-sensitive lighting applications?
The TD-75-24-E1M1 is assessed at the high frequency exemption level per IEEE 1789, making it suitable for flicker-sensitive lighting applications. It supports PWM dimming with a frequency up to 3600Hz.
What dimming range does the LTECH TD-75-24-E1M1 offer?
The dimming range is 0 to 100%, with a maximum dimming depth of 0.1%. This allows for very low light output levels in applications requiring precise control.
Can this driver be used indoors or outdoors?
This driver is specified for indoor environments. It does not have an IP rating for outdoor use, so it should be selected for indoor use cases only.
What protection features are included in this LED driver?
This model includes short circuit, over-temperature, overload, and over-voltage protection. These built-in protections help support reliability in demanding commercial and architectural LED applications.
What operating temperature range is supported by this model?
The specified operating temperature range is -30°C to 60°C. That makes the TD-75-24-E1M1 suitable for a broad range of indoor environments where temperature conditions may vary.
What kind of LED projects is the TD-75-24-E1M1 best suited for?
This model is best suited for 24V constant-voltage LED lighting projects that need TRIAC or ELV-style dimming compatibility. Its 75W rating makes it a fit for medium-power indoor applications where smooth dimming and low-light control are important.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



