Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well NID100-15 DC-DC Converter - 97.5W - 20~53V in 15V out 6.5A

SKU NID100-15

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

NID100-15 is the 15V output model of this series: rated current 6.5A, rated power 97.5W, typical efficiency 97%.

Features

Economical open frame design
Wide input range
High efficiency up to 97%
Remote ON / OFF control
Compact size 2.0"×1.082"× 0.472"(SIP package)
Protections: Short circuit / Overload / Over voltage
-30~+85℃ wide working temperature
Cooling by free air convection
Comply to BS EN/EN55032 ClassA without additional components
Trimming output (optional)
3 years warranty

Specifications

NID100-15Specifications from the official datasheet (2024-10-30 edition)

OUTPUT

DC VOLTAGE: 15V
RATED CURRENT: 6.5A
RATED POWER: 97.5W
RIPPLE & NOISE (max.)^Note.2: 150mVp-p
LINE REGULATION^Note.3: ±0.5%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE TOLERANCE: ±2.0%
SWITCHING FREQUENCY (Typ.): 200KHz
EXTERNAL CAPACITANCE LOAD (max.): 47uf/50V low ESR

INPUT

VOLTAGE RANGE: 20 ~ 53VDC
NORMAL VOLTAGE: 24VDC (or 48VDC)
EFFICIENCY (Typ.) 24Vin: 97%
EFFICIENCY (Typ.) 48Vin: 95%
DC CURRENT Full load: 4600mA/24VDC
DC CURRENT No load: 30mA
PROTECTION: Fuse recommended (8A)

PROTECTION

OVERLOAD (Typ.): 120 ~ 300% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 17.5~ 21V Protection type : Shut off o/p voltage, clamp by TVS diode
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

FUNCTION

REMOTE CONTROL: Power on : 1.2VDC < R.C ~ com < 12VDC or open circuit ; power off : R.C ~ com < 0.4VDC or short circuit (PIN5,6,7,8 & PIN13)

ENVIRONMENT

SAFETY STANDARDS: EAC TP TC 004 approved
WORKING TEMP.: -30 ~ +85℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 85% RH non-condensing
STORAGE TEMP.: -30 ~ +105℃
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARD: BS EN/EN62368-1(LVD)
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 Class A without external components,Class B with external components
Radiated BS EN/EN55032 Class A without external components,Class B with external components
EMC IMMUNITY: BS EN/EN55035

Parameter Standard Test Level

Radiated BS EN/EN61000-4-3 Level 2, 3V/m; criteria A
EFT / Burst BS EN/EN61000-4-4 Level 2, 1KV; criteria A
Surge BS EN/EN61000-4-5 Level 2, 1KV/Line-Line,criteria A
Conducted BS EN/EN61000-4-6 Level 2, 3V; criteria A

Parameter	Standard	Test Level
Conducted	BS EN/EN55032	Class A without external components,Class B with external components
Radiated	BS EN/EN55032	Class A without external components,Class B with external components

Parameter	Standard	Test Level
Radiated	BS EN/EN61000-4-3	Level 2, 3V/m; criteria A
EFT / Burst	BS EN/EN61000-4-4	Level 2, 1KV; criteria A
Surge	BS EN/EN61000-4-5	Level 2, 1KV/Line-Line,criteria A
Conducted	BS EN/EN61000-4-6	Level 2, 3V; criteria A

OTHERS

MTBF: 17290.5K hrs min. Telcordia SR-332 (Bellcore) ; 1000.6K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 50.8*27.5*12mm or 2.0"*1.082"*0.472" inch (L*W*H)
WEIGHT: 35g;280psc/10.8Kg/0.94CUFT

Test conditions and notes4

1.All parameters are specified at normal input, rated load, 25℃ 70% RH Ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.

Technical drawings

NID100-15 Derating Curve — Derating Curve

NID100-15 Mechanical Specification — Mechanical Specification

NID100-15 Pin Configuration — Pin Configuration

NID100-15 EMC Suggestion Circuit — EMC Suggestion Circuit

Downloads

Certificates3

Mean Well NID-35-65-100-EMC Certificate PDF Download

Mean Well NID-35-65-100-CE-dec Certificate PDF Download

Mean Well NID-35-65-100-UK-dec Certificate PDF Download

Test reports1

Mean Well NID100-15 Test Report PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the NID100-15 for 15V industrial instrumentation or control electronics?

Yes, if the application needs constant 15V and the load stays within 6.5A and 97.5W. Its 20-53V input range makes it suitable where the source voltage is higher than the 15V output rail.

Is the NID100-15 appropriate for 15V embedded or communications hardware in a vehicle or machine system?

It can be, as long as the source is within 20-53V and the load requires regulated 15V output. The converter can provide up to 6.5A, with total output power capped at 97.5W.

Can this converter support 15V sensor, relay, or accessory loads in automation equipment?

It is designed for constant-voltage 15V output, so it fits grouped 15V loads that remain under 6.5A and 97.5W. The 50.8 × 27.5 × 12.0 mm form factor also helps in compact assemblies.

Would the NID100-15 be a fit for specialized 15V control boards where 12V or 24V would be wrong?

Yes, that is the main role of this model: converting a 20-53V source to a regulated 15V output. It is intended for loads that need 15V specifically and do not exceed 6.5A or 97.5W.

How does NID100-15 compare with the other NID100 converters?

NID100-15 provides 15V at 6.5A with 97.5W total output and accepts 20-53V input. The series also includes NID100-12 at 12V and 7.5A for 90W, NID100-24 at 24V and 4.2A for 100.8W with 30-53V input, and NID100-5 at 5V and 11A for 55W with 10.5-53V input.

Is the NID100-15 suitable for wide-temperature industrial environments?

The specified operating range is -30°C to +85°C, so the temperature capability is broad. No IP rating is given in the product data, so environmental sealing for outdoor or exposed use is not defined here.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well NID100-5 DC-DC Converter - 55W - 10.5~53V in 5V out 11A	55W	5V	11A	IP20	View
Mean Well NID100-24 DC-DC Converter - 100.8W - 30~53V in 24V out 4.2A	100.8W	24V	4.2A	IP20	View
Mean Well NID100-12 DC-DC Converter - 90W - 20~53V in 12V out 7.5A	90W	12V	7.5A	IP20	View

Please log in to write a review.

{ "id":8442622312747, "variants" :[{ "context":"default", "variant_id": 45711664873771, "sku":"NID100-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well NID100-15 DC-DC Converter - 97.5W - 20~53V in 15V out 6.5A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

FUNCTION

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates3

Test reports1

Catalogues2

FAQ

Payment & Security

Other NID100 Models

Write a review

Your cart

Mean Well NID100-15 DC-DC Converter - 97.5W - 20~53V in 15V out 6.5A

Features

Company Information

Services and Support

Choose options