Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well PLC-45-20 Power Supply 45W 20V - PFC 2.3A

screw terminalfully isolated plastic casesuitable for signage applications

SKU PLC-45-20

Log in to see price Trade pricing & online ordering for account holders

End of Life, Succeeded by LCM-40

In stock

Overview

PLC-45-20 is the 20V output model of this series: rated current 2.3A, rated power 46W, typical efficiency 86.5%.

Features

Universal AC input / Full range
Adjustable output voltage and current level
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Fully isolated plastic case with terminal block style of I/O
Built-in active PFC function, comply with BS EN/EN61000-3-2 class C (≧75% load)
Class 2 power unit
Pass LPS
100% full load burn-in test
High reliability

Specifications

PLC-45-20Specifications from the official datasheet (2024-09-25 edition)

OUTPUT

DC VOLTAGE: 20V
CONSTANT CURRENT REGION^Note.6: 15 ~ 20V
RATED CURRENT: 2.3A
CURRENT RANGE: 0 ~ 2.3A
RATED POWER: 46W
RIPPLE & NOISE (max.)^Note.2: 1.8Vp-p
VOLTAGE ADJ. RANGE^Note.5: 19.5 ~ 22V
CURRENT ADJ. RANGE^Note.5: 1.725 ~ 2.37A
VOLTAGE TOLERANCE^Note.3: ±10%
LINE REGULATION: ±3.0%
LOAD REGULATION: ±5.0%
SETUP TIME: 500ms / 230VAC 1200ms / 115VAC at full load

INPUT

VOLTAGE RANGE^Note.4: 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.92/115VAC, PF>0.9/230VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION: THD< 20% when output loading≧75% at 115VAC/230VAC input
EFFICIENCY (Typ.): 86.5%
AC CURRENT (Typ.): 0.55A/115VAC 0.25A/230VAC
INRUSH CURRENT (Typ.): COLD START 35A(twidth=50μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 42 units (circuit breaker of type B) / 42 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 240VAC

PROTECTION

OVER CURRENT: 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE: 22.8 ~ 25V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -30 ~ +50℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: Ul1310, TUV BS EN/EN61347-1, BS EN/EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≧75% load) ; BS EN/EN61000-3-3,EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024,BS EN/EN61547, light industry level, EAC TP TC 020

OTHERS

MTBF: 3444.5K hrs min. Telcordia SR-332 (Bellcore) 417.1Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 181.5*62*35mm (L*W*H)
PACKING: 0.41Kg; 30pcs/13.3Kg/0.67CUFT

Certifications & ratings

Marked features: FC

Test conditions and notes11

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB.
6. Please refer to "DRIVING METHODS OF LED MODULE".
7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
11. This product is not suitable for LED lighting applications in China.(It is recommended to use the LPF/NPF/XLG/XLC/XLN series in China)

Technical drawings

PLC-45-20 Mechanical Specification — Mechanical Specification

PLC-45-20 Power Factor Characteristic — Power Factor Characteristic

PLC-45-20 EFFICIENCY vs LOAD (48V Model) — EFFICIENCY vs LOAD (48V Model)

Typical applications

Suitable for LED lighting and moving sign applications
Compliance to worldwide safety regulations for lighting
2 years warranty

Downloads

Datasheet1

PLC-45-20 datasheetPLC-45-SPEC.PDF · 2024-09-25 edition PDF Download

Certificates6

PSE Certificate(PLC-45)(EN) PDF Download

EMC Certificate(PLC-45)(EN) PDF Download

CB Certificate(PLC-45)(EN) PDF Download

UL Certificate(PLC-45)(EN) PDF Download

TUV Certificate(PLC-45)(EN) PDF Download

CCC Certificate(PLC-45)(CN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

What is the Mean Well PLC-45-20 designed for?

The PLC-45-20 is a 45W power supply intended for LED lighting and moving sign applications. It provides a 20V output and includes a built-in constant current limiting circuit for C.V.+C.C. operation.

What are the key electrical specs of the PLC-45-20?

This model is rated for 45W class output, with a nominal 20V output and 2.3A rated current. It also includes adjustable output voltage and current level, which can help match the power supply to application requirements within the product's designed range.

Does the PLC-45-20 include power factor correction?

Yes. The PLC-45-20 has built-in active PFC, with PF above 0.92 at 115VAC and above 0.9 at 230VAC at full load according to the datasheet. That makes it a relevant option for buyers looking for a power supply with active power factor correction.

What protection features are included in the PLC-45-20?

The PLC-45-20 includes protections for short circuit, over current, over voltage, and over temperature. It is also certified to UL1310 and carries the LPS mark, which can matter for commercial LED power applications.

What operating temperature range is this power supply rated for?

The specified operating temperature range is -30°C to 50°C. Buyers should confirm that the expected ambient conditions for their project stay within that range for reliable performance.

Is the PLC-45-20 a dimmable LED driver?

No. The provided product data lists dimming control as none, so this model is not positioned as a dimming power supply. It is better suited for applications that need a fixed-output 20V power supply rather than integrated dimming control.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well PLC-45-48 Power Supply 45W 48V - PFC 950mA	45.6W	48V	0.95A	IP20	View
Mean Well PLC-45-36 Power Supply 45W 36V - PFC 1.25A	45W	36V	1.25A	IP20	View
Mean Well PLC-45-27 Power Supply 45W 27V - PFC 1.7A	45.9W	27V	1.7A	IP20	View
Mean Well PLC-45-24 Power Supply 45W 24V - PFC 1.9A	45.6W	24V	1.9A	IP20	View
Mean Well PLC-45-15 Power Supply 45W 15V - PFC 3A	45W	15V	3A	IP20	View
Mean Well PLC-45-12 Power Supply 45W 12V - PFC 3.8A	45.6W	12V	3.8A	IP20	View

Please log in to write a review.

{ "id":8423874724139, "variants" :[{ "context":"default", "variant_id": 45636316660011, "sku":"PLC-45-20", "inventory_qty" : 3, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }