💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well PLC-60-15 Power Supply 60W 15V - PFC 4A

screw terminalfully isolated plastic casesuitable for signage applications
SKU PLC-60-15
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
End of Life, Succeeded by LCM-60
Available to order
|

Overview

PLC-60-15 is the 15V output model of this series: rated current 4A, rated power 60W, typical efficiency 86%.

Features

  • Universal AC input / Full range
  • High efficiency up to 89%
  • Adjustable output voltage and current level
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Built-in constant current limiting circuit
  • Fully isolated plastic case with terminal block style of I/O
  • Built-in active PFC function, comply with BS EN/EN61000-3-2 class C (≧75% load)
  • Class 2 power unit
  • Pass LPS
  • 100% full load burn-in test
  • High reliability

Specifications

PLC-60-15Specifications from the official datasheet (2026-02-09 edition)

OUTPUT

DC VOLTAGE
15V
CONSTANT CURRENT REGIONNote.6
10.5 ~15V
RATED CURRENT
4A
CURRENT RANGE
0 ~ 4A
RATED POWER
60W
RIPPLE & NOISE (max.)Note.2
2.4Vp-p
VOLTAGE ADJ. RANGENote.5
14.5 ~ 16.2V
CURRENT ADJ. RANGENote.5
3 ~ 4.12A
VOLTAGE TOLERANCENote.3
±10%
LINE REGULATION
±3.0%
LOAD REGULATION
±5.0%
SETUP TIME
500ms / 230VAC 3000ms / 115VAC at full load

INPUT

VOLTAGE RANGENote.4
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.92/115VAC, PF>0.9/230VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD< 20% when output loading≧75% at 115VAC/230VAC input
EFFICIENCY (Typ.)
86%
AC CURRENT (Typ.)
0.8A/115VAC 0.4A/230VAC
INRUSH CURRENT (Typ.)
COLD START 35A(twidth=35μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC

PROTECTION

OVER CURRENT
95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE
17.5 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.
-30 ~ +50℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
UL1310, TUV BS EN/EN61347-1, BS EN/EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), EAC TP TC 004 approved
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≧75% load) ; BS EN/EN61000-3-3,EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024,BS EN/EN61547, light industry level ,EAC TP TC 020

OTHERS

MTBF
3445.4K hrs min. Telcordia SR-332 (Bellcore) 515.0Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
181.5*62*35mm (L*W*H)
PACKING
0.41Kg; 30pcs/13.3Kg/0.67CUFT

Certifications & ratings

Marked features
LPS, FC
Test conditions and notes11
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
  5. 5. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB.
  6. 6. Please refer to "DRIVING METHODS OF LED MODULE".
  7. 7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  8. 8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
  9. 9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
  10. 10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  11. 11. This product is not suitable for LED lighting applications in China.(It is recommended to use the LPF/NPF/XLG/XLC/XLN series in China)

Technical drawings

PLC-60-15 Mechanical Specification
Mechanical Specification
PLC-60-15 Block Diagram
Block Diagram
PLC-60-15 Derating Curve
Derating Curve
PLC-60-15 Power Factor Characteristic
Power Factor Characteristic
PLC-60-15 EFFICIENCY vs LOAD (48V Model)
EFFICIENCY vs LOAD (48V Model)

Typical applications

  • Suitable for LED lighting and moving sign applications (Note.2)
  • Compliance to worldwide safety regulations for lighting
  • 2 years warranty

Downloads

FAQ

What applications is the Mean Well PLC-60-15 best suited for?

The PLC-60-15 is designed for LED lighting and moving sign applications that need a 15V DC power source. Its 60W output and built-in constant current limiting make it a practical choice for systems that drive LEDs in its 10.5-15V constant current region.

What are the main electrical ratings of the PLC-60-15?

This model is rated for 60W output power with a 15V DC output and 4A rated current. It also supports 90-264VAC universal AC input and includes power factor correction, with PF>0.92 at 115VAC and PF>0.9 at 230VAC at full load.

Does the PLC-60-15 support dimming control?

No, the PLC-60-15 does not include a dimming control function. If your project requires dimming, you would need to compare it with a different LED driver model that specifically lists dimming support.

What makes the PLC-60-15 different from a basic fixed-output power supply?

This model combines constant voltage output with built-in constant current limiting, which is useful in LED-related applications. It also includes PFC, the LPS marking, and a full set of protections including short circuit, over current, over voltage, and over temperature.

Can the output of the PLC-60-15 be adjusted?

Yes, the PLC-60-15 includes adjustable output voltage and current level capability. That gives buyers some flexibility when selecting this model for applications that need a 15V nominal output with tunable operating limits.

Is the PLC-60-15 suitable for demanding operating environments?

It is rated for operation from -30°C to 50°C (with derating per the derating curve), which supports use across a fairly wide temperature range. The unit is also rated for 20-95% RH non-condensing humidity and 2G vibration at 10-500Hz.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8423875477803, "variants" :[{ "context":"default", "variant_id": 45636325540139, "sku":"PLC-60-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well PLC-60-15 Power Supply 60W 15V - PFC 4A
Mean Well

Mean Well PLC-60-15 Power Supply 60W 15V - PFC 4A

Log in to see price

PLC-60-15 is the 15V output model of this series: rated current 4A, rated power 60W, typical efficiency 86%.

Features

  • Universal AC input / Full range
  • High efficiency up to 89%
  • Adjustable output voltage and current level
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Built-in constant current limiting circuit
  • Fully isolated plastic case with terminal block style of I/O
  • Built-in active PFC function, comply with BS EN/EN61000-3-2 class C (≧75% load)
  • Class 2 power unit
  • Pass LPS
  • 100% full load burn-in test
  • High reliability

Typical applications

  • Suitable for LED lighting and moving sign applications (Note.2)
  • Compliance to worldwide safety regulations for lighting
  • 2 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top