Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well PLC-60-27 Power Supply 60W 27V - PFC 2.3A

screw terminalfully isolated plastic casesuitable for signage applications

SKU PLC-60-27

Log in to see price Trade pricing & online ordering for account holders

End of Life, Succeeded by LCM-60

Available to order

Overview

PLC-60-27 is the 27V output model of this series: rated current 2.3A, rated power 62.1W, typical efficiency 88%.

Features

Universal AC input / Full range
High efficiency up to 89%
Adjustable output voltage and current level
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Fully isolated plastic case with terminal block style of I/O
Built-in active PFC function, comply with BS EN/EN61000-3-2 class C (≧75% load)
Class 2 power unit
Pass LPS
100% full load burn-in test
High reliability

Specifications

PLC-60-27Specifications from the official datasheet (2026-02-09 edition)

OUTPUT

DC VOLTAGE: 27V
CONSTANT CURRENT REGION^Note.6: 18.9 ~27V
RATED CURRENT: 2.3A
CURRENT RANGE: 0 ~ 2.3A
RATED POWER: 62.1W
RIPPLE & NOISE (max.)^Note.2: 2.7Vp-p
VOLTAGE ADJ. RANGE^Note.5: 25 ~ 30V
CURRENT ADJ. RANGE^Note.5: 1.725 ~ 2.369A
VOLTAGE TOLERANCE^Note.3: ±10%
LINE REGULATION: ±3.0%
LOAD REGULATION: ±5.0%
SETUP TIME: 500ms / 230VAC 3000ms / 115VAC at full load

INPUT

VOLTAGE RANGE^Note.4: 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.92/115VAC, PF>0.9/230VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION: THD< 20% when output loading≧75% at 115VAC/230VAC input
EFFICIENCY (Typ.): 88%
AC CURRENT (Typ.): 0.8A/115VAC 0.4A/230VAC
INRUSH CURRENT (Typ.): COLD START 35A(twidth=35μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 240VAC

PROTECTION

OVER CURRENT: 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE: 31 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -30 ~ +50℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL1310, TUV BS EN/EN61347-1, BS EN/EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≧75% load) ; BS EN/EN61000-3-3,EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024,BS EN/EN61547, light industry level ,EAC TP TC 020

OTHERS

MTBF: 3445.4K hrs min. Telcordia SR-332 (Bellcore) 515.0Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 181.5*62*35mm (L*W*H)
PACKING: 0.41Kg; 30pcs/13.3Kg/0.67CUFT

Certifications & ratings

Marked features: LPS, FC

Test conditions and notes11

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB.
6. Please refer to "DRIVING METHODS OF LED MODULE".
7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
11. This product is not suitable for LED lighting applications in China.(It is recommended to use the LPF/NPF/XLG/XLC/XLN series in China)

Technical drawings

PLC-60-27 Mechanical Specification — Mechanical Specification

PLC-60-27 Derating Curve — Derating Curve

PLC-60-27 Power Factor Characteristic — Power Factor Characteristic

PLC-60-27 EFFICIENCY vs LOAD (48V Model) — EFFICIENCY vs LOAD (48V Model)

Typical applications

Suitable for LED lighting and moving sign applications (Note.2)
Compliance to worldwide safety regulations for lighting
2 years warranty

Downloads

Datasheet1

PLC-60-27 datasheetPLC-60-SPEC.PDF · 2026-02-09 edition PDF Download

Certificates6

PSE Certificate(PLC-60)(EN) PDF Download

EMC Certificate(PLC-60)(EN) PDF Download

CB Certificate(PLC-60)(EN) PDF Download

UL Certificate(PLC-60)(EN) PDF Download

TUV Certificate(PLC-60)(EN) PDF Download

CCC Certificate(PLC-60)(CN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

What is the main output rating of the Mean Well PLC-60-27?

The PLC-60-27 is rated for 27V output and 2.3A rated current. Its listed power rating is 62.1W, and the product name identifies it as a 60W class power supply. This makes it suitable for applications that need a regulated 27V DC supply within that output range.

What types of applications is the PLC-60-27 designed for?

This model suits LED lighting and moving sign applications. It includes constant current limiting and an 18.9-27V constant current region for driving LEDs, which is commonly useful in LED power applications. Buyers looking for a dedicated LED power supply often choose this style of unit.

Does the Mean Well PLC-60-27 support dimming control?

No, this model is listed with no dimming control. If your project requires integrated dimming, this unit may not be the right fit. It is better suited to applications that need stable output without built-in dimming functionality.

What protection features are included in the PLC-60-27?

The PLC-60-27 includes protection for short circuit, over current, over voltage, and over temperature. These built-in safeguards help protect the power supply during abnormal operating conditions. Over voltage protection operates at 31-35V and shuts down the output until the unit is re-powered.

Can the PLC-60-27 be used in demanding power quality applications?

This model includes power factor correction, with PF>0.92 at 115VAC and PF>0.9 at 230VAC at full load. That can make it a better fit than non-PFC models where improved power factor is important. THD is below 20% at 75% load or higher, meeting EN61000-3-2 Class C.

What operating temperature range is specified for the PLC-60-27?

The specified operating temperature range is -30°C to 50°C. That gives it a fairly broad working range for many indoor and protected commercial environments. Buyers should still confirm the surrounding enclosure and system conditions are appropriate for that temperature window.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well PLC-60-48 Power Supply 60W 48V - PFC 1.3A	62.4W	48V	1.3A	IP20	View
Mean Well PLC-60-36 Power Supply 60W 36V - PFC 1.7A	61.2W	36V	1.7A	IP20	View
Mean Well PLC-60-24 Power Supply 60W 24V - PFC 2.5A	60W	24V	2.5A	IP20	View
Mean Well PLC-60-20 Power Supply 60W 20V - PFC 3A	60W	20V	3A	IP20	View
Mean Well PLC-60-15 Power Supply 60W 15V - PFC 4A	60W	15V	4A	IP20	View
Mean Well PLC-60-12 Power Supply 60W 12V - PFC 5A	60W	12V	5A	IP20	View

Please log in to write a review.

{ "id":8423875936555, "variants" :[{ "context":"default", "variant_id": 45636326359339, "sku":"PLC-60-27", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }