Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
BOKE BK-DDV080S-AHA24V0DN 80W 24V DALI-2 DT8 Tunable White LED Driv...
Log in to see priceOverview
BK-DDV080S-AHA24V0DN is the model of this series: typical efficiency 91% , see the electrical values below for details.
Features
- Support DALI-2+pushDIM+pushCCT control
- Configured as a DT6 (2-channel or 1-channel) or DT8 (Tunable White) driver through programming
- Support EnergyData function and energy-reporting reading (DALI Part 252)
- Support Luminaire data reading (DALI Part251), support diagnostics-maintenance reading (DALI Part253)
- 2 channels of constant voltage output,at the tinting temperature, the output channel power is complementary, and the total output power remains unchanged
- Support advanced functions such as corridorDIM, EL, CLO
- The programming configuration can be realized through the DALI interface or NFC interface
- Constant light output function(CLO)
- Soft dimming and flicker-free at any brightness, meets the new requirements of ErP certification
- High PF, high efficiency, low THD
- SELV and Class II design, suitable for use outside or inside of the luminaires
- 5 year guarantee
- Protective features (short-circuit, overload,over temperature, hot plug-in protection)
Specifications
Output parameters
- Regulation method
- Constant voltage
- Rated output current
- 3.34A
- Rated output voltage
- 24VDC
- Rated output power
- 80.16W Max
- Output voltage adjustment
- Fixed output
- Output voltage ripple(typ.)
- ≤350mV(100Hz,100%DIM)
- Output voltage accuracy
- ±3%
- Linear regulation
- ±3%
- Load regulation
- ±5%
- Flicker-free(typ.)
- Pst LM = 0.001, SVM = 0.020
Input parameters
- Rated input voltage range
- 200-240VAC 200-240VDC
- Input voltage range
- 180-264VAC 180-264VDC
- Input votage shock
- <380 V AC
- Input current
- <0.52A (Rated input voltage)
- Input frequency
- 0/50/60Hz
- Input PF/Input DF(typ.)
- PF: 0.99, DF: 0.99
- Input THD(typ.)
- 5%
- Efficiency(typ.)
- 91%
- In-rush current(typ.)
- 25A peak, 300us duration (50% Ipeak)
- Start/Switchover/Turn off(typ.)
- 0.7s(AC start),0.7s(DC start),0.3s(AC/DC switchover),0.5s(Turn off )
- Switching cycles
- > 100,000 switching cycles
- Power consumption(typ.)
- Full load: 88.1W, No load: N/A, Stand-by: <0.5W, Network stand-by: N/A
Safety
- Withstand voltage
- I/P-O/P(LED):3750V AC, I/P-DALI: 1500V AC, O/P-DALI: 1500V AC.
- Mains surge capability
- L-N:2KV(90°/270°, 5 times each with an interval of 60s)(Performance criterion:A)
- Leakage current(typ.)
- 0.7mA
- Isolation resistance
- I/P-O/P:100MΩ/500Vdc/25℃/70%RH
Control interface
- DALI dimming port
- Voltage range: 9.5-22.5V, typical 16V, interface current consumption: 1.8mA
- pushDIM dimming port
- Voltage range: AC180-264V 50/60Hz
- 1-10V 3in1 dimming port
- N/A
- Auxiliary power supply
- N/A
- Dimming range
- 0.1-100%
- Dimming drive mode
- H-PWM
Emergency support
- Central emergency system
- Supported
- Self-contained emergency
- Supported
Environment & Life time
- Operating temperature
- Ta=-20-55℃
- Case temperature
- Tc=90℃
- Operating humidity
- 5-85% RH, non-condensing
- Storage temp./humidity
- -40-80℃, 5-85% RH, non-condensing
- IP grade
- IP20
- MTBF
- 500,000H,MIL-HDBK-217F(25℃)
- Life-time
- Nominal life-time up to 100,000 h
- Vibration resistant
- 10~500Hz,5G 12min./1cycle,period for 72min. each along X,Y,Z axes
- Acoustic Noise
- <25dB(30cm, Normal operation)
- Environmental protection
- RoHS
Others
- Dimension
- L283*W43*H30mm
Certifications and standards
- Compliance certification
- CE, ENEC, UKCA, RCM, CCC, DALI-2, EL
- Safety
- GB/T 19510.1,GB/T 19510.213, EN61347-1, EN61347-2-13, EN62384
- EMC
- GB/T 17743 , GB17625.1, EN55015, EN61000-3-2 , EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547
- DALI-2
- IEC 62386-207(DALI-2), IEC 62386-101(DALI-2), IEC 62386-102(DALI-2), IEC 62386-209(DALI-2), DALI part 251,252,253
- EL
- Compatible IEC 61347-2- 13 Annex J, compatible with EN 60598-2-22 and EN 50172
- RF
- N/A
Certifications & ratings
- Marked features
- Energy, corridorDIM, CLO, EasySet, Data, CCT
Technical drawings
Typical applications
- LED indoor lighting
- LED office lighting
- LED commercial lighting
- Only for constant voltage type light strips or lamps
Downloads
Datasheet1
FAQ
What is this product used for?
It is a constant voltage LED driver designed for indoor lighting applications, supporting DALI-2 and pushDIM control interfaces.
What are the output specifications?
It provides a fixed 24VDC output with a rated current of 3.34A and a maximum power of 80.16W.
What is the input voltage range?
The unit accepts 180-264VAC or 180-264VDC input, with a rated range of 200-240VAC/DC.
How does dimming work?
It supports DALI-2 and pushDIM dimming with a range of 0.1-100%. The 1-10V dimming port is not available.
What is the IP rating and operating temperature?
The unit has an IP20 rating for indoor use only. It operates in ambient temperatures from -20°C to 55°C.
Which certifications does it have?
It is CE, ENEC, UKCA, RCM, CCC, DALI-2, and EL certified, complying with RoHS environmental standards.
What are the physical dimensions?
The dimensions are 283mm in length, 43mm in width, and 30mm in height.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
