Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

MEAN WELL SPWM-75-12DA2 75.6W 12V CV LED Driver 6.3A

DALI2 DT6PUSH dimmingfliker freeminimum dimming level 0.1%voltage adjustable 11-14V

SKU SPWM-75-12DA2

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SPWM-75-12DA2 is the 12V output model of this series: typical efficiency 89%. Type DA2: DALI-2 with DT6 control(1 channel output).

SPWM-75 series is a 75W AC/DC LED driver featuring the constant voltage mode with PWM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips. SPWM-75 operates from 100~305VAC and offers models with different rated voltage ranging include 12V and 24V. Thanks to the high efficiency up to 90%,with the fanless design,the entire series is able to operate for -20~+90℃case temperature under free air convection.SPWM-75 is equipped with various function options, such as dimming methodologies with DALI-2, so as to provide the optimal design flexibility for LED lighting system.

Features

DALI-2 DT6(Dimming) or DT8 (Tunable white/RGBW) control available
Constant voltage PWM style output with 1 to 4 channels
Standby power consumption <0.5W
Flicker free, complying with CE ErP directive
Plastic housing with class ll and PFC design
Function options: DALI-2+PUSH Dimming
Minimum dimming level 0.1%(DALI-2)
Cooled by free air convection
5 years warranty

Model encoding

Type	Function
Blank	3 in 1 dimming function (0~10Vdc,10V PWM signal and resistance)
DA2 (this model)	DALI-2 with DT6 control(1 channel output)
DA2Q	DALI-2 with DT8 control(4 channels output)

Specifications

SPWM-75-12DA2Specifications from the official datasheet (2026-01-12 edition)

OUTPUT

DC VOLTAGE: 12V
RATED CURRENT(Max.): 6.3A
RATED POWER(Max.): 75.6W
VOLTAGE ADJ. RANGE: 11~14V
PWM FREQUENCY (Typ.): 3.2kHz
SETUP, RISE TIME^Note.3: 500ms,80ms/ 230VAC ,1200ms,80ms/115VAC
HOLD UP TIME (Typ.): 10ms/230VAC or 115VAC

INPUT

VOLTAGE RANGE^Note.2: 100 ~ 305VAC 156 ~ 410VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD<10%@load≧50%/115VAC, 230VAC; @load≧75%/277VAC (Please refer to “TOTAL HARMONIC DISTORTION” section)
EFFICIENCY (Typ.): 89%
AC CURRENT (Typ.): 0.9A / 115VAC 0.45A / 230VAC 0.38A / 277VAC
INRUSH CURRENT (Typ.): COLD START 50A(twidth=500μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. NO. of PSUs on 16A CIRCUIT BREAKER: 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.25mA / 277VAC
STANDBY POWER CONSUMPTION: standby power consumption<0.5W (Dimming off)

PROTECTION

OVERLOAD: 105~135%, hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT: Blank type: Shut down O/P voltage, re-power on to recover after fault condition is removed DA2/DA2Q type:Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 15 ~ 20V Shut down O/P voltage, re-power on to recover after fault condition is removed
OVER TEMPERATURE: Shut down O/P voltage, re-power on to recover after fault condition is removed

ENVIRONMENT

WORKING TEMP.: Tcase=-20~+90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.: Tcase=90℃
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 5 ~ 100Hz, 2G 12min./1cycle, period for 72min. each along X,Y,Z axes

SAFETY & EMC

SAFETY STANDARDS: UL8750(Class P),CSA C22.2 No.250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC), BS EN/EN62384; GB/T19510.1,GB/T19510.213; EAC TP TC 004; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13
DALI STANDARDS: Comply with IEC62386-101, 102, 207(DT6),209(DT8),DALI Part 251
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION^Note.4: Parameter Standard

BS EN/EN61000-3-2 ,GB 17625.1 Class C @load≥50%
EMC IMMUNITY: BS EN/EN61547

Parameter Standard

BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
BS EN/EN61000-4-3 Level 2
BS EN/EN61000-4-4 Level 2
BS EN/EN61000-4-5 Level 4, 2KV/Line-Line
BS EN/EN61000-4-6 Level 2
BS EN/EN61000-4-8 Level 2
BS EN/EN61000-4-11:2020 30% dip 10 periods 100% interrruption 0.5 periods

Parameter	Standard
BS EN/EN61000-3-2 ,GB 17625.1	Class C @load≥50%

Parameter	Standard
BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
BS EN/EN61000-4-3	Level 2
BS EN/EN61000-4-4	Level 2
BS EN/EN61000-4-5	Level 4, 2KV/Line-Line
BS EN/EN61000-4-6	Level 2
BS EN/EN61000-4-8	Level 2
BS EN/EN61000-4-11:2020	30% dip 10 periods 100% interrruption 0.5 periods

OTHERS

FLICKER^Note.9: PstLM ≤ 1, SVM ≤ 0.4
MTBF: 2396.9 K hrs min. Telcordia SR-332 (Bellcore) ; 205.7 K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 290*38*28.5mm (L*W*H)
PACKING: 0.31Kg; 42 pcs/ 13.8 Kg/ 0.67 CUFT

Test conditions and notes11

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
5. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
6. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
8. It is not recommended to connect to capacitive loads.
9. Flicker is measured at full load with the light source provided by MEAN WELL.
10. RCM is on a voluntary basis. Non IC classification Independent LED control gear is not suitable for residential installations.
11. Based on IEC 62368-101/102 DALI power on timing and interruption regulations, the set up time needs to test with a DALI controller which can support for DALI power on function, otherwise the set up time will be higher than 0.5 second for DA2 type

Technical drawings

SPWM-75-12DA2 Block Diagram — Block Diagram

SPWM-75-12DA2 DIMMING OPERATION — DIMMING OPERATION

SPWM-75-12DA2 S P W M - 7 5 series — S P W M - 7 5 series

SPWM-75-12DA2 ◎ Applying additive resistance: 0~100kΩ — ◎ Applying additive resistance: 0~100kΩ

SPWM-75-12DA2 STATIC CHARACTERISTICS — STATIC CHARACTERISTICS

SPWM-75-12DA2 POWER FACTOR (PF) CHARACTERISTIC — POWER FACTOR (PF) CHARACTERISTIC

SPWM-75-12DA2 Mechanical Specification — Mechanical Specification

SPWM-75-12DA2 Terminal Pin No. Assignment (TB1) — Terminal Pin No. Assignment (TB1)

SPWM-75-12DA2 INSTALLATION MANUAL — INSTALLATION MANUAL

Typical applications

LED strip lighting(CW/WW/Tunable/RGBW)
LED decorative lighting
LED architecture lighting
Household lighting control system
DALI Building automation

Downloads

Datasheet1

SPWM-75-12DA2 datasheetSPWM-75-SPEC.PDF · 2026-01-12 edition PDF Download

FAQ

What is the MEAN WELL SPWM-75-12DA2 designed for?

The SPWM-75-12DA2 is a 12V constant-voltage LED driver for professional lighting systems that need controlled dimming. It delivers up to 75.6W and 6.3A, making it suitable for 12V LED loads that must be paired with a constant-voltage driver. Its DALI-2 DT6 support makes it relevant for commercial and building-automation lighting projects.

Does the SPWM-75-12DA2 support DALI dimming?

Yes. This model is part of the SPWM-75DA2 series and includes DALI-2 DT6 digital dimming support for precise brightness control. It also supports PUSH dimming, which gives specifiers an additional control option for compatible lighting systems.

Is the SPWM-75-12DA2 a constant-voltage or constant-current LED driver?

The SPWM-75-12DA2 is a constant-voltage LED driver with a 12V output. Its rated output current is 6.3A and its power rating is 75.6W. It should be selected for 12V constant-voltage LED applications rather than constant-current loads.

How does the SPWM-75-12DA2 differ from a standard non-DALI 12V LED driver?

The key difference is integrated DALI-2 DT6 dimming, which allows this model to fit into digital lighting-control systems. The product description also notes PUSH dimming support and AC/DC input operation, adding flexibility beyond a basic fixed-output driver. Buyers typically choose this model when dimming control and building-system compatibility matter, not just 12V output alone.

What operating temperature range is specified for the SPWM-75-12DA2?

The SPWM-75-12DA2 is specified for operation from -20°C to +90°C case temperature. That range makes it relevant for demanding commercial lighting environments where ambient conditions may vary significantly. Temperature suitability should still be evaluated against the final enclosure and application conditions.

What are the core electrical specs of the SPWM-75-12DA2?

The SPWM-75-12DA2 is rated at 75.6W with a 12V output and 6.3A rated current. It is intended for constant-voltage LED applications and includes DALI-2 DT6 and PUSH dimming support. MEAN WELL lists this model with a 5-year warranty.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
MEAN WELL SPWM-75-24 76.8W 24V CV LED Driver 3.2A	76.8W	24V	3.2A	IP20	View
MEAN WELL SPWM-75-24DA2Q 76.8W 24V CV LED Driver 3.2A	76.8W	24V	3.2A	IP20	View
MEAN WELL SPWM-75-24DA2 76.8W 24V CV LED Driver 3.2A	76.8W	24V	3.2A	IP20	View
MEAN WELL SPWM-75-12DA2Q 75.6W 12V CV LED Driver 6.3A	75.6W	12V	6.3A	IP20	View
MEAN WELL SPWM-75-12 75.6W 12V CV LED Driver 6.3A	75.6W	12V	6.3A	IP20	View

Please log in to write a review.

{ "id":14936013046126, "variants" :[{ "context":"default", "variant_id": 53221021122926, "sku":"SPWM-75-12DA2", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }