Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well IQB150W8-15 DC-DC Converter - 150W - 9~75V in 15V out 10A

quarter-brick package8:1 ultra-wide inputfully encapsulatedremote ON/OFF and sensetrimmable outputno minimum load

SKU IQB150W8-15

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

IQB150W8-15 is the 15V output model of this series: rated power 150W, typical efficiency 89%.

IQB150W8 series is 150W isolated and regulated module type DC-DC converter with quarter brick package. It features intermationaI standard pins, a high efficiency up to 89%,wide working temperature range -40~+ 90℃ , continuous-mode short circuit, overload, over voltage , input under voltage protection, remote ON/OFF and trimmable output voltage etc. The models account for 9~75Vdc 8:1 ultra-wide input range, and various output voltage, 5V/12V/15V/24V/48V for single output , which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

Quarter-brick(2.28" x 1.45" x 0.5") with industrial standard
pin-out
8:1(9~75Vdc) ultra-wide input range
Wide operating temperature range -40 ~ +90℃
No minimum load required
Full encapsulated
Protections: Short circuit (Continuous) / Overload / Over temperature / Over voltage / Input under voltage lockout
1.6KVac or 2.2kvdc I/O isolation
Remote ON/OFF control and remote sense
Trimming output (±10%)
3 years warranty

Specifications

IQB150W8-15Specifications from the official datasheet (2026-06-23 edition)

INPUT

INPUT VOLTAGE (RANGE): Nominal 12V,24V,36V,48V,72V (9~ 75V)
INPUT CURRENT NO LOAD: 50mA
INPUT CURRENT FULL LOAD: 3.51A
VOLTAGE RANGE: 9 ~ 75Vdc
SURGE VOLTAGE (0.1s max.): 80Vdc
FILTER: Pi type
PROTECTION: 15A/250Vac time delay fuse
SETUP TIME: 100ms max. (100% Load at Nominal Vin)

OUTPUT

OUTPUT VOLTAGE: 15V
OUTPUT CURRENT: 10A
EFFICIENCY (Typ.): 89%
CAPACITOR LOAD (MAX.): 5000μF
VOLTAGE ACCURACY: ±1.0%
RATED POWER: 150W
RIPPLE & NOISE^Note.2: 5V=120mVp-p, 12V/15V=150mVp-p,24V=240mVp-p,48V=480mVp-p
LINE REGULATION^Note.3: ±0.2%
LOAD REGULATION^Note.4: ±0.5%
SWITCHING FREQUENCY (Typ.): 5V:250KHZ ;12V/15V:300KHz ;48V:200KHz
EXTERNAL TRIM ADJ. RANGE (Typ.): ±10% (48V for -10%/+15%)

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 120 ~ 200% rated output power Protection type : Recovers automatically after fault condition is removed
OVER VOLTAGE: 110 ~ 170% rated output voltage Protection type : keep voltage
OVER TEMPERATURE: +110℃ thermal shutdown, recovers automatically after fault condition is removed
UNDER VOLTAGE LOCKOUT(Typ.) Start-up voltage: 9V
UNDER VOLTAGE LOCKOUT(Typ.) Shutdown voltage: 7V

FUNCTION

REMOTE CONTROL: Power ON: R.C ~ -Vin > 3 ~ 12Vdc or open circuit Power OFF: R.C ~ -Vin < 1.2Vdc or short

ENVIRONMENT

COOLING: Natural convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +90℃ max.
WORKING HUMIDITY: 5% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.05% / ℃ (0 ~ 90℃)
SOLDERING TEMPERATURE: 1.5mm from case of 3 ~ 5sec./260℃ max.
VIBRATION: MTL-STD-202G
OPERATING ALTITUDE: 2000 meters

SAFETY &EMC ( Note.6)

SAFETY STANDARDS: LVD IEC62368-1, EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.6KVac or 2.25KVdc I/P -Case:1KVac or 1.41KVdc O/P-Case:1KVac or 1.41KVdc
ISOLATION RESISTANCE: I/P-O/P:1000M Ohms / 500Vdc / 25℃/ 70% RH non-condensing
ISOLATION CAPACITANCE (Typ.): 3500pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 Class A with external components
Radiated BS EN/EN55032 Class A with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, ±6KV contact, Air 8KV
Radiated Susceptibility BS EN/EN61000-4-3 Level 3, 10V/m
EFT/Bursts(Note.5) BS EN/EN61000-4-4 Level 3, On power input port,±2KV external input capacitor required
Surge(Note.5) BS EN/EN61000-4-5 Level 3, On power input port,±2KV external input capacitor required
Conducted BS EN/EN61000-4-6 Level 3, 10V/m(r.m.s.)
Magnetic Field BS EN/EN61000-4-8 Level 3, 10A/m

OTHERS

MTBF: >1500Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 57.9*36.8*12.7mm (2.28*1.45*0.5 inch)
CASE MATERIAL: Aluminum base plate with plastic case
Potting material: Silcon
PACKING: 75g ; 11pcs/per tube, 132pcs/12 tube/per carton

Test conditions and notes6

1.All parameters are specified at normal input(48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 0% to 100% rated load.
5.External input capacitor required 1000μF.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

IQB150W8-15 Output derating VS input voltage — Output derating VS input voltage

IQB150W8-15 Derating Curve — Derating Curve

IQB150W8-15 IQB150W8-24_No Heatsink — IQB150W8-24_No Heatsink

IQB150W8-15 IQB150W8-48_No Heatsink — IQB150W8-48_No Heatsink

IQB150W8-15 Illustration (page 6) — Illustration (page 6)

IQB150W8-15 EMC Suggestion Circuit — EMC Suggestion Circuit

IQB150W8-15 Pin Assignment — Pin Assignment

Typical applications

Telecom/datacom system
Wireless network
Industrial control facility
Instrument
Analyzer
Highly vibrating, heavily dusty, extremely low or high temperature harsh environment

Downloads

Datasheet1

IQB150W8-15 datasheetIQB150W8_spec_sheet.pdf · 2026-06-23 edition PDF Download

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well IQB150W8-48 DC-DC Converter - 150W - 9~75V in 48V out 3.125A	150W	48V	3.125A	IP20	View
Mean Well IQB150W8-24 DC-DC Converter - 150W - 9~75V in 24V out 6.25A	150W	24V	6.25A	IP20	View
Mean Well IQB150W8-12 DC-DC Converter - 150W - 9~75V in 12V out 12.5A	150W	12V	12.5A	IP20	View
Mean Well IQB150W8-05 DC-DC Converter - 100W - 9~75V in 5V out 20A	150W	5V	20A	IP20	View

Please log in to write a review.

{ "id":15430783369582, "variants" :[{ "context":"default", "variant_id": 67751192592750, "sku":"IQB150W8-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }