💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well SMU02N-15 DC-DC Converter - 2W - 21.6~26.4V in 15V out 133mA

SKU SMU02N-15
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
Available to order
|

Overview

SMU02N-15 is the 15V output model of this series: rated power 2W, typical efficiency 84%.

Features

  • SIP packge
  • Industry standard pinout
  • 1500VDC I/O isolation
  • Built-in EMI filter without external components
  • Cooling by free air convection
  • Non-conductive plastic case
  • 100% burn-in test
  • Low cost / High reliability
  • 2 years warranty

Specifications

SMU02N-15Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE
15V
CURRENT RANGE
27 ~ 133mA
RATED POWER
2W
RIPPLE & NOISE (max.)Note.2
80mVp-p
LINE REGULATIONNote.3
±1.2% for 1% input variation
LOAD REGULATIONNote.4
±8.0%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY(Typ.)
100KHz

INPUT

VOLTAGE RANGE
21.6 ~ 26.4V
EFFICIENCY(Typ.)
84%
NORMAL VOLTAGE
24V
INPUT CURRENT Full load
107mA
INPUT CURRENT No load
15mA
PROTECTION (FUSE RECOMMENDED)
150mA
FILTER
Capacitor type

PROTECTION

OVERLOAD
Momentary Protection type : Broken
SHORT CIRCUIT
Momentary Protection type : Broken

ENVIRONMENT

WORKING TEMP.
-40 ~ +85℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-55 ~ +125℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.05% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE
80pF max.
EMI RADIATION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP TC 020
EMS IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8 light industry level, criteria A, EAC TP TC 020

OTHERS

MTBF
100Khrs min. MIL-HDBK-217F(25℃)
DIMENSION (L*W*H)
11.6*7.5*10.14mm or 0.46"*0.30"*0.40" inch
PACKING
1.3g ; 42 pcs/per tube, 6720 pcs/ 160 tube/per carton
Test conditions and notes4
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 20% to 100% rated load.

Technical drawings

SMU02N-15 Mechanical Specification Unit: mm
Mechanical Specification Unit: mm
SMU02N-15 Packing
Packing

Downloads

FAQ

Can I use the SMU02N-15 in a 24V industrial system to create a 15V auxiliary rail?

Yes, it is meant for 21.6-26.4VDC input systems that need a 15V constant voltage output. At 2W with 133mA listed output current, it fits low-power 15V auxiliary electronics rather than heavier 15V loads.

Is the SMU02N-15 suitable for 15V analog or interface circuits in automation equipment?

It is a reasonable fit for small 15V interface, analog, or control subcircuits when the source is 21.6-26.4VDC. The 2W power level keeps it in the low-power embedded and automation category.

Can this converter be used in compact embedded hardware where board space matters?

Its 11.6 × 7.5 × 10.14 mm dimensions and 1.3g weight make it well suited to very compact electronics assemblies. That form factor is useful when a low-power 15V rail is needed inside dense industrial or embedded designs.

Does the SMU02N-15 work in cold or hot operating conditions?

The specified operating temperature is -40°C to +85°C, so it supports a wide ambient range. Since no IP rating is listed, it should still be used in protected indoor enclosures instead of exposed outdoor conditions.

What is the difference between the SMU02N-15 and the other SMU02N converters?

The listed sibling set includes SMU02N-05 at 2W, 5V, and 400mA listed output current, SMU02N-12 at 2W, 12V, and 167mA listed output current, and SMU02N-15 at 2W, 15V, and 133mA listed output current. Across this group, the output voltage and listed output current change while the 2W power class stays the same.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442808107307, "variants" :[{ "context":"default", "variant_id": 45712832725291, "sku":"SMU02N-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SMU02N-15 DC-DC Converter - 2W - 21.6~26.4V in 15V out 133mA
Mean Well

Mean Well SMU02N-15 DC-DC Converter - 2W - 21.6~26.4V in 15V out 133mA

Log in to see price

SMU02N-15 is the 15V output model of this series: rated power 2W, typical efficiency 84%.

Features

  • SIP packge
  • Industry standard pinout
  • 1500VDC I/O isolation
  • Built-in EMI filter without external components
  • Cooling by free air convection
  • Non-conductive plastic case
  • 100% burn-in test
  • Low cost / High reliability
  • 2 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top