Mean Well ELG-100-C500DA Constant Current LED Driver - Auckland, New Zealand Distributor

Overview

ELG-100-C500DA is the model of this series: rated current 500mA, typical efficiency 91%.

ELG-100-C series is a 100W LED AC/DC driver featuring the constant current mode and high voltage output. ELG-100-C operates from 100~360VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 92%, with the fanless design, the entire series is able to operate for -40℃~+90℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-100-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Features

Constant current mode output
Metal housing design with functional Ground
Built-in active PFC function
No load / Standby power consumption <0.5W
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off) ; Smart timer dimming; DALI
Typical lifetime>50000 hours
5 years warranty

Specifications

ELG-100-C500DASpecifications from the official datasheet (2026-07-06 edition)

OUTPUT

RATED CURRENT: 500mA
RATED POWER 200VAC ~ 305VAC: 100W
RATED POWER 100VAC ~ 180VAC: 70W
CONSTANT CURRENT REGION^Note.2: 100 ~ 200V
OPEN CIRCUIT VOLTAGE(max.): 210V
CURRENT ADJ. RANGE: Adjustable for A/AB-Type only (via built-in potentiometer)
CURRENT ADJ. RANGE: 250 ~ 500mA
CURRENT RIPPLE: 5.0% max. @rated current
CURRENT TOLERANCE: ±5.0%
SET UP TIME^Note.4: 1000ms/115VAC 500ms/230VAC

INPUT

VOLTAGE RANGE^Note.3: 100 ~ 305VAC 142 ~ 431VDC continue,320VAC for 24Hrs; 360VAC for 1Hr (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD< 20%(@load≧50%/115VC; @load≧60%/230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.): 91%
AC CURRENT (Typ.): 1.1A / 115VAC 0.6A / 230VAC 0.5A/277VAC
INRUSH CURRENT(Typ.): COLD START 40A(twidth=760μs measured at 50% Ipeak)/230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC
NO LOAD / STANDBY POWER CONSUMPTION: No load power consumption <0.5W for Blank / A-Type Standby power consumption <0.5W for B / AB / DA-Type

PROTECTION

SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 222 ~ 242V Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.: Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.: Tcase=+90℃
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 60℃)
VIBRATION: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL8750(type”HL”), CSA C22.2 No. 250.13-12;BS EN/EN/AS/NZS 61347-1, BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;BIS IS15885(for 700A,1050A only);GB/T19510.1, GB/T19510.213; IP65 or IP67; KC61347-1,KC61347-2-13 approved
DALI STANDARDS: Compliance to IEC62386-101,102,(207 by request) for DA Type only
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@ load≧60%) ; BS EN/EN61000-3-3; GB/T 17743, GB17625.1; EAC TP TC 020; KC KN15,KN61547
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV); EAC TP TC 020; KC KN15,KN61547

OTHERS

MTBF: 3070.8K hrs min. Telcordia SR-332 (Bellcore) 300.7Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 199*63*35.5 mm (L*W*H)
PACKING: 0.85kg; 16pcs/14.2kg/0.72CUFT

Test conditions and notes11

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to "DRIVING METHODS OF LED MODULE". For DA-Type, Constant Current region is 60%~100% of maximum voltage under rated power delivery.
3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃ or less.
7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
11. For A/AB type need to consider build in using to comply with Type HL application.

Technical drawings

ELG-100-C500DA BLOCK DIAGRAM — BLOCK DIAGRAM

ELG-100-C500DA DIMMING OPERATION — DIMMING OPERATION

ELG-100-C500DA OUTPUT LOAD vs TEMPERATURE(Note.7) — OUTPUT LOAD vs TEMPERATURE(Note.7)

ELG-100-C500DA STATIC CHARACTERISTIC — STATIC CHARACTERISTIC

ELG-100-C500DA TOTAL HARMONIC DISTORTION — TOTAL HARMONIC DISTORTION

ELG-100-C500DA MECHANICAL SPECIFICATION — MECHANICAL SPECIFICATION

ELG-100-C500DA Dimensions (mm) — Dimensions (mm)

ELG-100-C500DA ※ B/DA-Type — ※ B/DA-Type

ELG-100-C500DA ※ 3Y Model (3-wire input) — ※ 3Y Model (3-wire input)

ELG-100-C500DA Recommend Mounting Direction — Recommend Mounting Direction

Typical applications

LED street lighting
LED harbor lighting
LED bay lighting
LED greenhouse lighting
LED flood lighting
Type “HL” for use in Class I, Division 2 hazardous (Classified) location.

Downloads

Certificates4

UL Certificate (ELG-100-C)(EN) PDF Download

CB Certificate (ELG-100-C)(EN) PDF Download

EMC Certificate (ELG-100-C)(EN) PDF Download

ENEC Certificate (ELG-100-C)(EN) PDF Download

Test reports1

Test Report (ELG-100-C500)(EN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

Can I use the ELG-100-C500DA to power LED downlights in a DALI-controlled commercial space?

Yes. The ELG-100-C500DA is a constant current driver with built-in DALI dimming, making it well suited for commercial LED downlight systems on a DALI bus. It delivers 500mA across a CC output voltage range of 120–200V (60–100% of maximum voltage for the DA-Type) and handles up to 100W. The IP67 rating also allows installation inside recessed ceiling cavities where moisture ingress is a concern.

Is the ELG-100-C500DA suitable for powering high-voltage LED signage modules?

Yes, provided the LED string forward voltage falls within the 120–200V constant current operating range of the DA-Type. The driver maintains a steady 500mA output regardless of load variations, which suits series-connected LED signage modules. Because it operates at higher LED string voltages than the higher-current versions of the series, it is a good fit for long-string indoor channel-letter or lightbox applications.

Can this driver be installed outdoors or in wet environments?

Yes. The ELG-100-C500DA carries an IP67 waterproof rating, meaning it is protected against temporary immersion and can be mounted in exposed outdoor locations such as building facades or exterior signage cabinets. Its case temperature (Tcase) rating of -40°C to +90°C supports installation in both cold and warm climates.

How does the ELG-100-C500DA differ from the non-DALI ELG-100-C500?

The ELG-100-C500DA adds DALI (Digital Addressable Lighting Interface) dimming control versus the standard ELG-100-C500 which has no built-in dimming. Both deliver 100W at 500mA constant current; the CC range is 100–200V for the C500 and 120–200V (60–100% of maximum voltage) for the DA version. Choose the DA variant when your installation requires integration into a DALI building automation or lighting control network.

How many LEDs can the ELG-100-C500DA drive in a series string?

The number of LEDs depends on each LED's forward voltage. The DA-Type constant current output voltage range spans 120–200V, so any series string whose total forward voltage falls within that window can be used. Divide the available voltage range by the forward voltage of your specific LED to determine how many can be placed in series.

What input voltage range does the ELG-100-C500DA support?

The driver accepts a universal AC input of 100–305VAC, covering standard 120V and 230V mains as well as higher industrial supply voltages. This wide input range makes it usable across North American, European, and Asian electrical infrastructure without modification.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well ELG-100-C700A Power Supply 100W 700mA - Adjustable	100.1W	149V	0.7A	IP65	View
Mean Well ELG-100-C1050A-3Y Power Supply 100W 1050mA - Adjustable — 3-Wire Input (with Earth)	99.75W	105V	1.05A	IP65	View

Please log in to write a review.

{ "id":8420748853547, "variants" :[{ "context":"default", "variant_id": 45621578203435, "sku":"ELG-100-C500DA", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well ELG-100-C500DA Power Supply 100W 500mA - DALI

Select model — 15 in this family

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Typical applications

Downloads

Certificates4

Test reports1

Catalogues1

FAQ

Payment & Security

Other ELG-100 Models

Write a review

Your cart

Mean Well ELG-100-C500DA Power Supply 100W 500mA - DALI

Features

Typical applications

Company Information

Services and Support

Choose options