Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SHP-30K-55 30KW High Efficiency Power Supply 55V Out 346A

three phasehigh efficiency up to 97%2U rackactive current sharing up to 12 units(285KW)double insulation

SKU SHP-30K-55

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SHP-30K-55 is the model of this series: typical efficiency 95%.

SHP-30K-HV series is a 30KW high efficiency AC/DC power supply. This series operates for the wide range three phase AC input neutral is not needed, and offers the models with DC outputs (55V/115V/230V/380V) that mostly demanded by various industries. Can be working at ambient temperature up to 70℃ with forced air cooling. Moreover, SHP-30K-HV series provides vast design flexibility by equipping various built-in functions such as output programming, active current sharing, remote ON-OFF control, auxiliary power, and communication protocols, that will not only satisfy maker demand, but also enhance automation purpose. SHP-30K-HV can provide 120% short-duration peak power for motor applications and electromechanical loads requiring much higher power during start-up.

Features

3ψ 3-wire / △ or Y 340~530VAC or 3ψ 4-wire / Y 340~530VAC
High efficiency up to 97%
Up to 120% peak power capability
2U high 19-inch rack with forced air cooling
Built-in CANBus/Optional PMBus/MODBUS-RTU/RS-485 protocol
Output voltage and constant current level programmable
Active current sharing up to 12 units(285KW) and more
Built-in remote ON-OFF control / Auxiliary power / Alarm signal / Fan fail
Protections: Short circuit / Overload / Over voltage / Over temperature
Double insulation for 55V model
5 years warranty

Specifications

SHP-30K-55Specifications from the official datasheet (2024-10-17 edition)

OUTPUT

DC VOLTAGE (factory default): 55V
CURRENT (factory default): 346A
CURRENT RANGE: 0 ~ 346A
RATED POWER (max.): 19000W
FULL POWER VOLTAGE RANGE: 48 ~ 57.6V
RIPPLE & NOISE (max.)^Note.2: 0.55Vp-p
VOLTAGE ADJ. RANGE: 39 ~ 57.6V
VOLTAGE ADJ. RANGE: Can be adjusted via built-in potentiometer
VOLTAGE TOLERANCE^Note.3: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±0.5%
SETUP, RISE TIME: 3000ms, 100ms at full load
HOLD UP TIME (Typ.): 20ms / 400VAC at 75% load 16ms / 400VAC at full load

INPUT

VOLTAGE RANGE^Note.5: 3ψ 3-wire or 3ψ 4-wire / 340 ~ 530VAC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): ≧0.98/400VAC/480VAC at full load
EFFICIENCY (Typ.)^Note.6: 95%
AC CURRENT (Typ.): 30A/400VAC 25.2A/480VAC
INRUSH CURRENT (Typ.): 60A/400VAC 80A/480VAC
LEAKAGE CURRENT: <14mA peak / 530VAC, <9mA rms / 530VAC

PROTECTION

OVER LOAD: Output power >105% rated for more than 5 seconds then shut down o/p voltage, re-power on to recover Protection type : Constant current limiting for output power >120% rated for more than 5 seconds and then shut down o/p voltage, re-power on to recover
OVER VOLTAGE: 60.5 ~ 69.1V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

CURRENT SHARING: Up to 12 units or more. Please refer to the Current share derating curve
OUTPUT VOLTAGE PROGRAMMABLE: Adjustment of output voltage is allowable between 50 ~ 120% of nominal output voltage. Please refer to the PV curve function manual
CONSTANT CURRENT LEVEL PROGRAMMABLE: Adjustment of constant current level is allowable between 1 ~ 100% of rated current. Please refer to the PC curve function manual
AUXILIARY POWER(AUX): 12V@1.5A tolerance±5%, ripple 150mVp-p
REMOTE ON-OFF CONTROL: Please refer to the function manual.
ALARM SIGNAL OUTPUT: AC-OK, DC-OK, Fan Fail, T-ALARM. Please refer to the function manual.
DC-OK/T-ALARM/FAN FAIL SIGNAL: The TTL signal output, PSU turn on = -0.5 ~ 0.5V ; PSU turn off = 3.5 ~ 5.5V. Please refer to the function manual
AC-OK SIGNAL: The TTL signal output, PSU turn on = 3.5 ~ 5.5V ; PSU turn off = -0.5 ~ 0.5V. Please refer to the function manual

ENVIRONMENT

WORKING TEMP.: -30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC (Note 7)

SAFETY STANDARDS: UL62368-1, CAN/CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE^Note.4: I/P-O/P:4.25KVAC I/P-FG:3KVAC O/P-FG:1.25KVAC
ISOLATION RESISTANCE^Note.4: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 (CISPR32) / EN55011 (CISPR11) Class A
Radiated BS EN/EN55032 (CISPR32) / EN55011 (CISPR11) Class A
Harmonic Current BS EN/EN61000-3-12
Voltage Flicker BS EN/EN61000-3-11
EMC IMMUNITY: EN55024 , EN61204-3, EN61000-6-2

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 3
EFT / Burst BS EN/EN61000-4-4 Level 3
Surge BS EN/EN61000-4-5 Level 4, 4KV/Line-Earth; Level 3, 2KV/Line-Line
Conducted BS EN/EN61000-4-6 Level 3
Magnetic Field BS EN/EN61000-4-8 Level 4
Voltage Dips and Interruptions BS EN/EN61000-4-34 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS

MTBF: 188.1K hrs min. Telcordia SR-332 (Bellcore) ; 20.9K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 540*424*83.5mm (L*W*H)
PACKING: 23.4Kg; 1pcs/23.4Kg/2.82CUFT

Test conditions and notes10

1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance :includes set up tolerance, line regulation and load regulation.
4. During withstand voltage and isolation resistance testing, the screw "A" shall be temporarily removed, and shall be installed back after the testing.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. The efficiency is measured at 75% load and 480VAC input.
7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 600mm*900mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
9. If use PV signal to adjust Vo, under certain operations conditions, ripple noise of Vo might slightly go over rating defined in this specification.
10. Under light load condition, output voltage ripple will exceed specification. The behavior can be minimized by increasing the load.

Technical drawings

SHP-30K-55 BLOCK DIAGRAM — BLOCK DIAGRAM

SHP-30K-55 DERATING CURVE — DERATING CURVE

SHP-30K-55 STATIC CHARACTERISTICS — STATIC CHARACTERISTICS

SHP-30K-55 SHP-30K-HV series — SHP-30K-HV series

SHP-30K-55 OUTPUTVOLTAGE(%) — OUTPUTVOLTAGE(%)

SHP-30K-55 SHP-30K-HV series (2) — SHP-30K-HV series (2)

SHP-30K-55 OUTPUTCURRENT(%) — OUTPUTCURRENT(%)

SHP-30K-55 5.Remote ON-OFF Control — 5.Remote ON-OFF Control

SHP-30K-55 Illustration (page 9) — Illustration (page 9)

Typical applications

Downloads

::specification::

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current
Mean Well SHP-30K-380 30KW High Efficiency Power Supply 55V Out 79A	30000W	380V	79A	View
Mean Well SHP-30K-230 30KW High Efficiency Power Supply 230V Out 130.5A	30000W	230V	130.5A	View
Mean Well SHP-30K-115 30KW High Efficiency Power Supply 115V Out 261A	30000W	115V	261A	View

Please log in to write a review.

{ "id":9610700390699, "variants" :[{ "context":"default", "variant_id": 49396522451243, "sku":"SHP-30K-55", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }