Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well NID35-24 DC-DC Converter - 36W - 30~53V in 24V out 1.5A

SKU NID35-24

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

NID35-24 is the 24V output model of this series: rated power 36W.

Features

Economical open frame design
Wide input range
High efficiency up to 96%
Remote ON / OFF control
Compact size 2.0"×0.512"× 0.433"(SIP package)
Protections: Short circuit / Overload / Over voltage
-30~+85℃ wide working temperature
Cooling by free air convection
Comply to BS EN/EN55032 ClassA without additional components
Trimming output (optional)
3 years warranty

Specifications

NID35-24Specifications from the official datasheet (2024-10-30 edition)

OUTPUT

DC VOLTAGE: 24V
CURRENT RANGE: 0 ~ 1.5A
RATED POWER: 36W
RIPPLE & NOISE (max.)^Note.2: 200mVp-p
LINE REGULATION^Note.3: ±0.5%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE TOLERANCE: ±2.0%
SWITCHING FREQUENCY (Typ.): 200KHz
EXTERNAL CAPACITANCE LOAD (max.): 47uf/50V low ESR

INPUT

VOLTAGE RANGE: 30 ~ 53VDC
NORMAL VOLTAGE: 48VDC
EFFICIENCY (Typ.) 24Vin: ------
EFFICIENCY (Typ.) 48Vin: 95%
DC CURRENT Full load: 840mA/48VDC
DC CURRENT No load: 50mA

PROTECTION

PROTECTION: Fuse recommended (3A)
OVERLOAD (Typ.): 120 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 28~ 33V Protection type : Shut off o/p voltage, clamp by TVS diode
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

FUNCTION

REMOTE CONTROL: Power on : 1.2VDC < R.C ~ com < 12VDC or open circuit ; power off : R.C ~ com < 0.4VDC or short circuit (PIN5,6 & PIN11)

ENVIRONMENT

SAFETY STANDARDS: EAC TP TC 004 approved
WORKING TEMP.: -30 ~ +85℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 85% RH non-condensing
STORAGE TEMP.: -30 ~ +105℃
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 55℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARD: BS EN/EN62368-1(LVD)
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 Class A without external components,Class B with external components
Radiated BS EN/EN55032 Class A without external components,Class B with external components
EMC IMMUNITY: BS EN/EN55035

Parameter Standard Test Level

Radiated BS EN/EN61000-4-3 Level 2, 3V/m; criteria A
EFT / Burst BS EN/EN61000-4-4 Level 2, 1KV; criteria A
Surge BS EN/EN61000-4-5 Level 2, 1KV/Line-Line,criteria A
Conducted BS EN/EN61000-4-6 Level 2, 3V; criteria A

Parameter	Standard	Test Level
Conducted	BS EN/EN55032	Class A without external components,Class B with external components
Radiated	BS EN/EN55032	Class A without external components,Class B with external components

Parameter	Standard	Test Level
Radiated	BS EN/EN61000-4-3	Level 2, 3V/m; criteria A
EFT / Burst	BS EN/EN61000-4-4	Level 2, 1KV; criteria A
Surge	BS EN/EN61000-4-5	Level 2, 1KV/Line-Line,criteria A
Conducted	BS EN/EN61000-4-6	Level 2, 3V; criteria A

OTHERS

MTBF: 12321.5K hrs min. Telcordia SR-332 (Bellcore) ; 757.9K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 50.8*13*11mm or 2.0"*0.512"*0.433" inch (L*W*H)
WEIGHT: 9g;440psc/4.96Kg/0.94CUFT

Test conditions and notes4

1.All parameters are specified at normal input, rated load, 25℃ 70% RH Ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.

Technical drawings

NID35-24 Derating Curve — Derating Curve

NID35-24 Pin Configuration — Pin Configuration

NID35-24 EMC Suggestion Circuit — EMC Suggestion Circuit

Downloads

Certificates3

Mean Well NID-35-65-100-EMC Certificate PDF Download

Mean Well NID-35-65-100-CE-dec Certificate PDF Download

Mean Well NID-35-65-100-UK-dec Certificate PDF Download

Test reports1

Mean Well NID35-24 Test Report PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the NID35-24 for 24V industrial sensors or PLC-side devices?

Yes, if the equipment needs a constant-voltage 24V output and the total load stays within 36W and 1.5A. That makes it suitable for lighter 24V control and sensing loads rather than higher-current 24V equipment. The converter is intended for regulated 24V electronics, not constant-current applications.

Is the NID35-24 suitable for a small 24V automation subsystem?

It can fit a small 24V automation section when the total demand remains at or below 36W and 1.5A. Its compact 50.8 × 13.0 × 11.0 mm dimensions also help in tight assemblies. This model is best for lower-power 24V loads, not larger 24V devices with higher current demand.

Can the NID35-24 be used where the source voltage is in the 30 to 53V range?

Yes, its specified input range is 30 to 53V. It regulates that input to a constant 24V output with up to 1.5A and 36W available. That makes it relevant where a higher input rail must be converted to a lower, stable 24V supply.

What are the differences between the NID35-24 and the other NID35 versions?

The NID35-24 is rated 36W at 24V and 1.5A, with a 30 to 53V input range. Other NID35 models are NID35-12 at 34.8W, 12V, 2.9A; NID35-15 at 36W, 15V, 2.4A; and NID35-5 at 17.5W, 5V, 3.5A. The family differs by output voltage, output current, wattage, and input range.

Is the NID35-24 OK for cold or hot environments, and does it have outdoor protection?

The operating temperature specification is -30°C to +85°C, so it is rated across a wide temperature span. The listed data does not include an IP rating. That means the temperature range is provided, but outdoor or water-exposed suitability is not specified here.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well NID35-5 DC-DC Converter - 17.5W - 10.5~53V in 5V out 3.5A	17.5W	5V	3.5A	IP20	View
Mean Well NID35-15 DC-DC Converter - 36W - 20~53V in 15V out 2.4A	36W	15V	2.4A	IP20	View
Mean Well NID35-12 DC-DC Converter - 34.8W - 20~53V in 12V out 2.9A	34.8W	12V	2.9A	IP20	View

Please log in to write a review.

{ "id":8442624049451, "variants" :[{ "context":"default", "variant_id": 45711672115499, "sku":"NID35-24", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well NID35-24 DC-DC Converter - 36W - 30~53V in 24V out 1.5A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

FUNCTION

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates3

Test reports1

Catalogues2

FAQ

Payment & Security

Other NID35 Models

Write a review

Your cart

Mean Well NID35-24 DC-DC Converter - 36W - 30~53V in 24V out 1.5A

Features

Company Information

Services and Support

Choose options