TCI DALI 20W 250-700mA adjustable constant current/voltage driver(123403)

Features

•  Multipower driver supplied with dip-switch for the selection

of the output current.

•  IP20 independent driver, for indoor use.

•  Class II protection against electric shock for direct or indirect

contact.

•  Driver for built-in use (DC MINIJOLLY DALI BI).

•  It can be used for lighting equipment in protection class I and II

(DC MINIJOLLY DALI BI).

•  IP00, creepage distances and clearances rely on the final application

according to IEC/EN 60598-1 (DC MINIJOLLY DALI BI).

•  Active Power Factor Corrector.

•  Analogical input (NTC) for thermal sensor connection.

•  Current regulation ±5 % including temperature variations.

•  Input and output terminal blocks on the same side

(wire cross-section up to 1,5 mm2 / AWG15).

•  Clamping screws on primary and secondary circuits for cables

with diameter: PRI 5-8 mm / SEC 3-5 mm.

•  Protections:

- against overheating and short circuits;

- against mains voltage spikes;

- against overloads.

•  Thermal protection = C.5.a.

::specification::