Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well ODLC-45-1050DA Power Supply 45W 1050mA, DALI

SKU ODLC-45-1050DA

Log in to see price Trade pricing & online ordering for account holders

End of Life, Succeeded by XLN-60-H-DA2

Available to order

Overview

ODLC-45-1050DA is the model of this series: rated current 1050mA, rated power 45.15W, typical efficiency 85%.

ODLC-45 series is a 45W LED AC/DC driver featuring the constant current mode output with flicker free design.ODLC-45 operates from 90~295VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the fanless design, the entire series is able to operate for -20℃~+85℃ case temperature under free convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLC-45 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.

Features

Constant Current mode output
Flicker free design
Plastic housing with class II design
Built-in active PFC function
No load power consumption<0.5W(Blank-Type), Standby power consumption<0.5W(DA-Type)
IP67 rating for indoor or outdoor installations
Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output; DALI
3 years warranty

Specifications

ODLC-45-1050DASpecifications from the official datasheet (2022-04-12 edition)

OUTPUT

RATED CURRENT: 1050mA
RATED POWER: 45.15W
CONSTANT CURRENT REGION^Note.2: 26 ~ 43V
OPEN CIRCUIT VOLTAGE(max.): 63V
CURRENT RIPPLE: 5% max. @rated current
CURRENT TOLERANCE: ±7.0%
SETUP TIME^Note.4: 500ms / 230VAC 1200ms/115VAC
AUXILIARY DC OUTPUT^Note.5: Nominal 12V(deviation 11.4~12.6)@50mA for ODLC-45A only

INPUT

VOLTAGE RANGE^Note.3: 90 ~ 295VAC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD< 20%(@load≧60%/230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section)
EFFICIENCY (Typ.): 85%
AC CURRENT: 0.6A/115VAC 0.4A/230VAC 0.3A/277VAC
INRUSH CURRENT (Typ.): COLD START 30A(twidth=100μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC
NO LOAD/STANDBY POWER CONSUMPTION: No load power consumption<0.5W for Blank-Type,<1.2W for ODLC-45A Standby power consumption<0.5W for DA-Type

PROTECTION

SHORT CIRCUIT: Hiccup mode,auto-recovery after fault condition is removed for DA type； Hiccup mode,re-power on to recovery for other type

ENVIRONMENT

WORKING TEMP.: Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.: Tcase=+85℃
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 40℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL8750(type”HL”),CSA C22.2 NO.250.13-12;ENEC BS EN/EN61347-1 & BS EN/EN61347-2-13 independent, BS EN/EN62384; BIS IS15885( for ODLC-45-700,1050,700DA,1050DA only), EAC TP TC 004,IP67 approved
DALI STANDARDS: Compliance to IEC62386-101, 102 for DA-Type only
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≧60%) ; BS EN/EN61000-3-3, GB17743,GB17625.1,EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level(surge immunity: Line-Line:1KV),EAC TP TC 020

OTHERS

MTBF: 3513.4K hrs min. Telcordia SR-332 (Bellcore) ;340.8K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 111*77*28.5mm(L*W*H)
PACKING: 0.42Kg; 24pcs/ 11Kg/ 0.72CUFT

Test conditions and notes10

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.
5. Aux. 12V will be damaged with short circuit; It will not be available when output voltage is not in constant current region or output no load condition.
6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
7. The DALI version driver does not support the bit 1: Lamp failure in the Command 144 Query status of the DALI standard.
8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.

Technical drawings

ODLC-45-1050DA Block Diagram — Block Diagram

ODLC-45-1050DA DIMMING OPERATION — DIMMING OPERATION

ODLC-45-1050DA OUTPUT LOAD vs TEMPERATURE — OUTPUT LOAD vs TEMPERATURE

ODLC-45-1050DA STATIC CHARACTERISTIC — STATIC CHARACTERISTIC

ODLC-45-1050DA TOTAL HARMONIC DISTORTION — TOTAL HARMONIC DISTORTION

ODLC-45-1050DA MECHANICAL SPECIFICATION — MECHANICAL SPECIFICATION

Typical applications

LED panel lighting
LED flood lighting
Indoor LED lighting
Industrial lighting

Downloads

Certificates7

Mean Well ODLC-45-EMC Certificate PDF Download

Mean Well IDLV-ODLV-IDLC-ODLC-45(DA)-BIS Certificate PDF Download

Mean Well IDLC-ODLC-45-65-ENEC Certificate PDF Download

Mean Well IDLC-ODLC-45-65(A)-CB Certificate PDF Download

Mean Well IDLC-ODLC-45-65-CE-dec Certificate PDF Download

Mean Well IDLC-ODLC-45-65-UK-dec Certificate PDF Download

Mean Well IDLC Series UL Certificate PDF Download

Test reports1

Mean Well ODLC-45-1050 Test Report PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

Can I use the ODLC-45-1050DA with a 1050mA LED downlight module?

Yes, this is a constant current LED driver rated for 1050mA output. It is suitable when the downlight's total forward voltage falls within the 26-43V constant current range and the load stays within 45.15W.

Will this work for a signage light engine or compact LED array?

It can, but only if the light engine is designed for constant current operation at 1050mA. The connected LED load must also stay within the 26-43V output range, since this driver does not provide constant voltage output.

Is this driver a good fit for mid-power architectural LED modules?

It is a fit for architectural LED modules that require 1050mA constant current and fall within the 26-43V operating window. The available output power is 45.15W, so the module wattage must remain within that limit.

How should I check LED compatibility with the ODLC-45-1050DA?

Confirm that the LED module requires 1050mA constant current and that the total forward voltage is between 26V and 43V. The number of LEDs depends on each LED's forward voltage, so there is no single fixed LED count for this driver.

What is the difference between the ODLC-45-1050DA and the other ODLC constant current models?

Within the related series, the 1050mA models are 26-43V at 45.15W, the 1400mA models are 19-32V at 44.8W, the 700mA models are 38-64V at 44.8W, the 500mA models are 54-90V at 45W, and the 350mA models are 57-95V at 33.25W. The 65-series siblings step up to 65.1W at 1050mA with 46-62V, 64.4W at 1400mA with 34-46V, 63W at 1750mA with 27-36V, or 65.1W at 700mA with 69-93V.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well ODLC-45-700DA Power Supply 45W 700mA, DALI	44.8W	64V	0.7A	IP67	View
Mean Well ODLC-45-700 Power Supply 45W 700mA, Dimmable	44.8W	64V	0.7A	IP67	View
Mean Well ODLC-45-500DA Power Supply 45W 500mA, DALI	45W	90V	0.5A	IP67	View
Mean Well ODLC-45-500 Power Supply 45W 500mA, Dimmable	45W	90V	0.5A	IP67	View
Mean Well ODLC-45-350DA Power Supply 45W 350mA, DALI	33.25W	95V	0.35A	IP67	View
Mean Well ODLC-45-350 Power Supply 45W 350mA, Dimmable	33.25W	95V	0.35A	IP67	View
Mean Well ODLC-45-1400DA Power Supply 45W 1400mA, DALI	44.8W	32V	1.4A	IP67	View
Mean Well ODLC-45-1400 Power Supply 45W 1400mA, Dimmable	44.8W	32V	1.4A	IP67	View
Mean Well ODLC-45-1050 Power Supply 45W 1050mA, Dimmable	45.15W	43V	1.05A	IP67	View

Please log in to write a review.

{ "id":8420998218027, "variants" :[{ "context":"default", "variant_id": 45622353330475, "sku":"ODLC-45-1050DA", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }