Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SPRN01L-15 is the 15V output model of this series: rated power 1W, typical efficiency 71%.
SP RN01 and DP RN01 series are 1 W isolated and regulated module type DC-DC converter with SIP 6 package. It features international standard pins, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V / 48 V -5~+10% , and various output voltage, 5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.
Features
- SIP6 package with industry standard pinout
- Operating temperature range -40 ~ +90℃
- Comply to BS EN/EN55032 radiated Class B without additional components
- Protection: Short circuit
- 1.5KVDC I/O isolation
- Low cost
- 3 years warranty
Specifications
INPUT
- INPUT VOLTAGE (RANGE)
- Normal 5V (4.75 ~ 5.5V)
- INPUT CURRENT NO LOAD
- 40mA
- INPUT CURRENT FULL LOAD
- 278mA
- VOLTAGE RANGE
- 4.75 ~ 5.5Vdc ,
- SURGE VOLTAGE (100ms max.)
- 5Vin models : 9Vdc ; 12Vin models : 18Vdc ; 24Vin models : 30Vdc ; 48Vin models : 60Vdc
- FILTER
- Internal capacitor
- PROTECTION
- Fuse recommended. 5Vin models: 500mA, 12Vin models: 250mA, 24Vin models: 100mA, 48Vin models: 60mA
- INTERNAL POWER DISSIPATION
- 600mW
OUTPUT
- OUTPUT VOLTAGE
- 15V
- OUTPUT CURRENT
- 0 ~ 67mA
- EFFICIENCY (TYP.)
- 71%
- CAPACITOR LOAD (MAX.)
- 100μF
- VOLTAGE ACCURACY
- ±3.0%
- RATED POWER
- 1W
- RIPPLE & NOISENote.2
- 75mVp-p
- LINE REGULATIONNote.3
- ±1.0%
- LOAD REGULATIONNote.4
- ±1.0%
- SWITCHING FREQUENCY (Typ.)
- 110KHz
PROTECTION
- SHORT CIRCUIT
- SPRN01: Current limit protection 60 sec. max., DPRN01: 1 sec. max.
ENVIRONMENT
- COOLING
- Free-air convection
- WORKING TEMP.
- -40 ~ +90℃ (Refer to "Derating Curve")
- CASE TEMPERATURE
- +110℃ max.
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -55 ~ +125℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- 0.05% / ℃ (0 ~ 71℃)
- SOLDERING TEMPERATURE
- 1.5mm from case of 1 ~ 3sec./260℃ max.
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC ( Note.5)
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- ISOLATION CAPACITANCE (Typ.)
- 80pF
- EMC EMISSION
-
Parameter Standard Test Level Conducted BS EN/EN55032(CISPR32) N/A Radiated BS EN/EN55032(CISPR32) Class B - EMC IMMUNITY
-
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 3, ±8KV air, Level 2, ±4KV contact Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV at power, Level 2, 0.5KV at signal Surge BS EN/EN61000-4-5 Level 2, 0.5KV Line-Line, Level 2, 1KV Line ground Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.) Magnetic Field BS EN/EN61000-4-8 Level 1,1A/m
OTHERS
- MTBF
- 1000Khrs MIL-HDBK-217F(25℃)
- DIMENSION (L*W*H)
- 19.6*7.1*10.14mm (0.77*0.28*0.40 inch)
- CASE MATERIAL
- Non-Conductive black plastic (UL 94V-0 rated)
- PACKING
- 2.5g ; 25pcs/per tube, 4000pcs/160 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc, O:48Vdc), rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
Technical drawings
Typical applications
- Telecom/ datacom system
- Wireless network
- Industrial control facility
- Instrument
- Analyzer
- Detector
- Data switch
Downloads
Certificates3
Test reports1
FAQ
Can I use the SPRN01L-15 for a low-power 15V analog or industrial signal circuit?
Yes, it provides a 15V constant-voltage output from a 4.75~5.5V input range. With a 1W rating and 0.07A output current, it is intended for low-power 15V circuitry rather than higher-demand equipment.
Is the SPRN01L-15 suitable for embedded boards that need a small 15V rail?
It can be a fit for embedded or instrumentation designs that need a regulated 15V rail from a 4.75~5.5V input source. The 1W output rating keeps it in the category of low-power support electronics.
Can this model be used in compact automation modules with limited space?
Yes, the converter measures 19.6 × 10.14 × 7.1 mm and weighs 0.0025 kg, so it works well in compact assemblies. It is designed for constant-voltage 15V output in small industrial or embedded designs.
Would the SPRN01L-15 work in equipment installed in very hot or very cold areas?
Its operating temperature range is -40°C to +90°C, which supports use in equipment exposed to significant temperature variation. Since no IP rating is listed in the specs, it is better suited to protected indoor housings than direct outdoor exposure.
How does the SPRN01L-15 differ from the other SPRN01L versions?
All three SPRN01L models are 1W converters with the same 19.6 × 10.14 × 7.1 mm dimensions, 0.0025 kg weight, and -40°C to +90°C operating range. The difference is output: SPRN01L-05 is 5V, SPRN01L-12 is 12V at 0.08A, and SPRN01L-15 is 15V at 0.07A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SPRN01 Models
11 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



