Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SPRN01M-15 is the 15V output model of this series: rated power 1W, typical efficiency 73%.
SP RN01 and DP RN01 series are 1 W isolated and regulated module type DC-DC converter with SIP 6 package. It features international standard pins, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V / 48 V -5~+10% , and various output voltage, 5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.
Features
- SIP6 package with industry standard pinout
- Operating temperature range -40 ~ +90℃
- Comply to BS EN/EN55032 radiated Class B without additional components
- Protection: Short circuit
- 1.5KVDC I/O isolation
- Low cost
- 3 years warranty
Specifications
INPUT
- INPUT VOLTAGE (RANGE)
- Normal 12V (11.4 ~ 13.2V)
- INPUT CURRENT NO LOAD
- 18mA
- INPUT CURRENT FULL LOAD
- 115mA
- VOLTAGE RANGE
- 11.4 ~ 13.2Vdc ,
- SURGE VOLTAGE (100ms max.)
- 5Vin models : 9Vdc ; 12Vin models : 18Vdc ; 24Vin models : 30Vdc ; 48Vin models : 60Vdc
- FILTER
- Internal capacitor
- PROTECTION
- Fuse recommended. 5Vin models: 500mA, 12Vin models: 250mA, 24Vin models: 100mA, 48Vin models: 60mA
- INTERNAL POWER DISSIPATION
- 600mW
OUTPUT
- OUTPUT VOLTAGE
- 15V
- OUTPUT CURRENT
- 0 ~ 67mA
- EFFICIENCY (TYP.)
- 73%
- CAPACITOR LOAD (MAX.)
- 100μF
- VOLTAGE ACCURACY
- ±3.0%
- RATED POWER
- 1W
- RIPPLE & NOISENote.2
- 75mVp-p
- LINE REGULATIONNote.3
- ±1.0%
- LOAD REGULATIONNote.4
- ±1.0%
- SWITCHING FREQUENCY (Typ.)
- 110KHz
PROTECTION
- SHORT CIRCUIT
- SPRN01: Current limit protection 60 sec. max., DPRN01: 1 sec. max.
ENVIRONMENT
- COOLING
- Free-air convection
- WORKING TEMP.
- -40 ~ +90℃ (Refer to "Derating Curve")
- CASE TEMPERATURE
- +110℃ max.
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -55 ~ +125℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- 0.05% / ℃ (0 ~ 71℃)
- SOLDERING TEMPERATURE
- 1.5mm from case of 1 ~ 3sec./260℃ max.
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC ( Note.5)
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- ISOLATION CAPACITANCE (Typ.)
- 80pF
- EMC EMISSION
-
Parameter Standard Test Level Conducted BS EN/EN55032(CISPR32) N/A Radiated BS EN/EN55032(CISPR32) Class B - EMC IMMUNITY
-
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 3, ±8KV air, Level 2, ±4KV contact Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV at power, Level 2, 0.5KV at signal Surge BS EN/EN61000-4-5 Level 2, 0.5KV Line-Line, Level 2, 1KV Line ground Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.) Magnetic Field BS EN/EN61000-4-8 Level 1,1A/m
OTHERS
- MTBF
- 1000Khrs MIL-HDBK-217F(25℃)
- DIMENSION (L*W*H)
- 19.6*7.1*10.14mm (0.77*0.28*0.40 inch)
- CASE MATERIAL
- Non-Conductive black plastic (UL 94V-0 rated)
- PACKING
- 2.5g ; 25pcs/per tube, 4000pcs/160 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc, O:48Vdc), rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
Technical drawings
Typical applications
- Telecom/ datacom system
- Wireless network
- Industrial control facility
- Instrument
- Analyzer
- Detector
- Data switch
Downloads
Certificates3
Test reports1
FAQ
Can I use the SPRN01M-15 to derive 15V for a small industrial sensor or transducer?
It can fit low-power industrial or embedded loads that need a constant 15V output, as long as the source is within the listed 11.4~13.2VDC input range. The output is limited to 1W and 67mA, so it is suited to light auxiliary sensor or signal-conditioning duty rather than larger 15V loads.
Is this 15V converter suitable for embedded control boards that need an isolated low-power rail?
For compact embedded electronics that only need a small constant 15V rail, this model can be an option if the available input falls within 11.4~13.2VDC. Its 1W rating and 67mA output make it appropriate for low-demand support circuitry, not higher-draw control hardware.
Can the SPRN01M-15 be used in automation equipment for analog interface or measurement circuits?
It can work for low-power automation subcircuits that require a steady 15V output and stay within 67mA. The key checks are the 11.4~13.2VDC input window and the 1W output limit, which keep it in the range of light analog or measurement support tasks.
Is the SPRN01M-15 appropriate for harsh temperature environments?
The specified operating temperature range is -40°C to +90°C, which supports use across a wide span of industrial temperature conditions. No IP rating is listed in the provided specs, so indoor or enclosed use is the safer assumption unless the finished system provides the required environmental protection.
How does the SPRN01M-15 compare with the other SPRN01M versions?
Within the SPRN01M series, all listed models are 1W converters. The SPRN01M-05 is 5V with 200mA, the SPRN01M-12 is 12V with 84mA, and the SPRN01M-15 is 15V with 67mA.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SPRN01 Models
11 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



