Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SPRN01N-12 DC-DC Converter - 1W - 22.8~26.4V in 12V out

SKU SPRN01N-12

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SPRN01N-12 is the 12V output model of this series: rated power 1W, typical efficiency 72%.

SP RN01 and DP RN01 series are 1 W isolated and regulated module type DC-DC converter with SIP 6 package. It features international standard pins, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V / 48 V -5~+10% , and various output voltage, 5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP6 package with industry standard pinout
Operating temperature range -40 ~ +90℃
Comply to BS EN/EN55032 radiated Class B without additional components
Protection: Short circuit
1.5KVDC I/O isolation
Low cost
3 years warranty

Specifications

SPRN01N-12Specifications from the official datasheet (2024-08-02 edition)

INPUT

INPUT VOLTAGE (RANGE): Normal 24V (22.8 ~ 26.4V)
INPUT CURRENT NO LOAD: 10mA
INPUT CURRENT FULL LOAD: 60mA
VOLTAGE RANGE: 22.8 ~ 26.4Vdc ,
SURGE VOLTAGE (100ms max.): 5Vin models : 9Vdc ; 12Vin models : 18Vdc ; 24Vin models : 30Vdc ; 48Vin models : 60Vdc
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 5Vin models: 500mA, 12Vin models: 250mA, 24Vin models: 100mA, 48Vin models: 60mA
INTERNAL POWER DISSIPATION: 600mW

OUTPUT

OUTPUT VOLTAGE: 12V
OUTPUT CURRENT: 0 ~ 84mA
EFFICIENCY (TYP.): 72%
CAPACITOR LOAD (MAX.): 100μF
VOLTAGE ACCURACY: ±3.0%
RATED POWER: 1W
RIPPLE & NOISE^Note.2: 75mVp-p
LINE REGULATION^Note.3: ±1.0%
LOAD REGULATION^Note.4: ±1.0%
SWITCHING FREQUENCY (Typ.): 110KHz

PROTECTION

SHORT CIRCUIT: SPRN01: Current limit protection 60 sec. max., DPRN01: 1 sec. max.

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +110℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.05% / ℃ (0 ~ 71℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 80pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032(CISPR32) N/A
Radiated BS EN/EN55032(CISPR32) Class B
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, ±8KV air, Level 2, ±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV at power, Level 2, 0.5KV at signal
Surge BS EN/EN61000-4-5 Level 2, 0.5KV Line-Line, Level 2, 1KV Line ground
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1,1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032(CISPR32)	N/A
Radiated	BS EN/EN55032(CISPR32)	Class B

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, ±8KV air, Level 2, ±4KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV at power, Level 2, 0.5KV at signal
Surge	BS EN/EN61000-4-5	Level 2, 0.5KV Line-Line, Level 2, 1KV Line ground
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1,1A/m

OTHERS

MTBF: 1000Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.6*7.1*10.14mm (0.77*0.28*0.40 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.5g ; 25pcs/per tube, 4000pcs/160 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc, O:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SPRN01N-12 Mechanical Specification — Mechanical Specification

SPRN01N-12 Pin Configuration — Pin Configuration

Typical applications

Downloads

Certificates3

Certificate (SPRN01-DPRN01-EMC)(EN) PDF Download

Certificate (SPRN01-DPRN01-CE-dec)(EN) PDF Download

Certificate (SPRN-DPRN01-UK-dec)(EN) PDF Download

Test reports1

Test Report (SPRN01N-12)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SPRN01N-12 for a 12V industrial sensor or low-power control circuit?

It can suit low-power industrial or automation subcircuits that need a constant 12V output, provided the source stays within 22.8-26.4VDC. With a 1W rating and 84mA output, it is intended for light 12V loads rather than broader control power distribution.

Is the SPRN01N-12 appropriate for embedded monitoring or instrumentation electronics?

For embedded or instrumentation sections that only need a small regulated 12V rail, this model can be a match. The important limits are the 1W output ceiling, the 84mA output current, and the required 22.8-26.4VDC input range.

Can this converter be used in automation panels for small analog or relay-support functions?

It can work for low-demand 12V support tasks inside automation equipment when the available source is 22.8-26.4VDC. Since it delivers constant voltage at 12V and is limited to 1W and 84mA, it is better for small auxiliary functions than higher-draw panel loads.

Is the SPRN01N-12 suitable for indoor or outdoor environments?

The operating temperature range is specified as -40°C to +90°C, so the temperature capability is broad. However, no IP rating is listed in the provided specs, so outdoor exposure should depend on the enclosure used around the converter rather than the converter alone.

How does the SPRN01N-12 compare with the other output options in the SPRN01N family?

The listed SPRN01N siblings all share a 1W power rating. The SPRN01N-05 is 5V at 200mA, the SPRN01N-12 is 12V at 84mA, and the SPRN01N-15 is 15V at 67mA.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well SPRN01O-15 DC-DC Converter - 1W - 45.6~52.8V in 15V out	1W	15V	0.067A	IP20	View
Mean Well SPRN01O-12 DC-DC Converter - 1W - 45.6~52.8V in 12V out	1W	12V	0.084A	IP20	View
Mean Well SPRN01O-05 DC-DC Converter - 1W - 45.6~52.8V in 5V out	1W	5V	200 Milliampere	IP20	View
Mean Well SPRN01N-15 DC-DC Converter - 1W - 22.8~26.4V in 15V out	1W	15V	0.067A	IP20	View
Mean Well SPRN01N-05 DC-DC Converter - 1W - 22.8~26.4V in 5V out	1W	5V	200 Milliampere	IP20	View
Mean Well SPRN01M-15 DC-DC Converter - 1W - 11.4~13.2V in 15V out	1W	15V	0.067A	IP20	View
Mean Well SPRN01M-12 DC-DC Converter - 1W - 11.4~13.2V in 12V out	1W	12V	0.084A	IP20	View
Mean Well SPRN01M-05 DC-DC Converter - 1W - 11.4~13.2V in 5V out	1W	5V	200 Milliampere	IP20	View
Mean Well SPRN01L-15 DC-DC Converter - 1W - 4.75~5.5V in 15V out	1W	15V	0.067A	IP20	View
Mean Well SPRN01L-12 DC-DC Converter - 1W - 4.75~5.5V in 12V out	1W	12V	0.084A	IP20	View
Mean Well SPRN01L-05 DC-DC Converter - 1W - 4.75~5.5V in 5V out	1W	5V	200 Milliampere	IP20	View

Please log in to write a review.

{ "id":8442829734187, "variants" :[{ "context":"default", "variant_id": 45712963207467, "sku":"SPRN01N-12", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }