Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SPRN01N-15 DC-DC Converter - 1W - 22.8~26.4V in 15V out

SKU SPRN01N-15

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SPRN01N-15 is the 15V output model of this series: rated power 1W, typical efficiency 73%.

SP RN01 and DP RN01 series are 1 W isolated and regulated module type DC-DC converter with SIP 6 package. It features international standard pins, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V / 48 V -5~+10% , and various output voltage, 5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP6 package with industry standard pinout
Operating temperature range -40 ~ +90℃
Comply to BS EN/EN55032 radiated Class B without additional components
Protection: Short circuit
1.5KVDC I/O isolation
Low cost
3 years warranty

Specifications

SPRN01N-15Specifications from the official datasheet (2024-08-02 edition)

INPUT

INPUT VOLTAGE (RANGE): Normal 24V (22.8 ~ 26.4V)
INPUT CURRENT NO LOAD: 10mA
INPUT CURRENT FULL LOAD: 60mA
VOLTAGE RANGE: 22.8 ~ 26.4Vdc ,
SURGE VOLTAGE (100ms max.): 5Vin models : 9Vdc ; 12Vin models : 18Vdc ; 24Vin models : 30Vdc ; 48Vin models : 60Vdc
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 5Vin models: 500mA, 12Vin models: 250mA, 24Vin models: 100mA, 48Vin models: 60mA
INTERNAL POWER DISSIPATION: 600mW

OUTPUT

OUTPUT VOLTAGE: 15V
OUTPUT CURRENT: 0 ~ 67mA
EFFICIENCY (TYP.): 73%
CAPACITOR LOAD (MAX.): 100μF
VOLTAGE ACCURACY: ±3.0%
RATED POWER: 1W
RIPPLE & NOISE^Note.2: 75mVp-p
LINE REGULATION^Note.3: ±1.0%
LOAD REGULATION^Note.4: ±1.0%
SWITCHING FREQUENCY (Typ.): 110KHz

PROTECTION

SHORT CIRCUIT: SPRN01: Current limit protection 60 sec. max., DPRN01: 1 sec. max.

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +110℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.05% / ℃ (0 ~ 71℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 80pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032(CISPR32) N/A
Radiated BS EN/EN55032(CISPR32) Class B
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, ±8KV air, Level 2, ±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV at power, Level 2, 0.5KV at signal
Surge BS EN/EN61000-4-5 Level 2, 0.5KV Line-Line, Level 2, 1KV Line ground
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1,1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032(CISPR32)	N/A
Radiated	BS EN/EN55032(CISPR32)	Class B

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, ±8KV air, Level 2, ±4KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV at power, Level 2, 0.5KV at signal
Surge	BS EN/EN61000-4-5	Level 2, 0.5KV Line-Line, Level 2, 1KV Line ground
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1,1A/m

OTHERS

MTBF: 1000Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.6*7.1*10.14mm (0.77*0.28*0.40 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.5g ; 25pcs/per tube, 4000pcs/160 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc, O:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SPRN01N-15 Mechanical Specification — Mechanical Specification

SPRN01N-15 Pin Configuration — Pin Configuration

Typical applications

Downloads

Certificates3

Certificate (SPRN01-DPRN01-EMC)(EN) PDF Download

Certificate (SPRN01-DPRN01-CE-dec)(EN) PDF Download

Certificate (SPRN-DPRN01-UK-dec)(EN) PDF Download

Test reports1

Test Report (SPRN01N-15)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SPRN01N-15 to provide 15V for a compact automation interface board?

It can be used for low-power automation or interface electronics that need a constant 15V rail, as long as the source is within 22.8-26.4VDC. The output is limited to 1W and 67mA, so it is intended for light auxiliary circuitry rather than larger 15V devices.

Is this 15V converter suitable for industrial measurement or signal-conditioning modules?

For small measurement or signal-conditioning functions that require 15V, this model can fit if the input supply falls in the 22.8-26.4VDC range. Its 1W maximum output and 67mA current rating make it a low-power option.

Could the SPRN01N-15 be used in embedded equipment that needs a dedicated 15V auxiliary rail?

Yes, for embedded equipment with a modest 15V requirement, this converter can provide constant voltage output from a 22.8-26.4VDC source. The 1W limit means it is best for small support rails, bias circuits, or other low-demand embedded functions.

Does the SPRN01N-15 handle demanding temperature conditions?

The specified operating range is -40°C to +90°C, which supports use across a wide industrial temperature span. No IP rating is shown in the provided specs, so environmental sealing for outdoor or washdown exposure would need to come from the host enclosure.

What are the differences between SPRN01N-05, SPRN01N-12, and SPRN01N-15?

All listed SPRN01N versions are rated at 1W. The SPRN01N-05 outputs 5V at 200mA, the SPRN01N-12 outputs 12V at 84mA, and the SPRN01N-15 outputs 15V at 67mA.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well SPRN01O-15 DC-DC Converter - 1W - 45.6~52.8V in 15V out	1W	15V	0.067A	IP20	View
Mean Well SPRN01O-12 DC-DC Converter - 1W - 45.6~52.8V in 12V out	1W	12V	0.084A	IP20	View
Mean Well SPRN01O-05 DC-DC Converter - 1W - 45.6~52.8V in 5V out	1W	5V	200 Milliampere	IP20	View
Mean Well SPRN01N-12 DC-DC Converter - 1W - 22.8~26.4V in 12V out	1W	12V	0.084A	IP20	View
Mean Well SPRN01N-05 DC-DC Converter - 1W - 22.8~26.4V in 5V out	1W	5V	200 Milliampere	IP20	View
Mean Well SPRN01M-15 DC-DC Converter - 1W - 11.4~13.2V in 15V out	1W	15V	0.067A	IP20	View
Mean Well SPRN01M-12 DC-DC Converter - 1W - 11.4~13.2V in 12V out	1W	12V	0.084A	IP20	View
Mean Well SPRN01M-05 DC-DC Converter - 1W - 11.4~13.2V in 5V out	1W	5V	200 Milliampere	IP20	View
Mean Well SPRN01L-15 DC-DC Converter - 1W - 4.75~5.5V in 15V out	1W	15V	0.067A	IP20	View
Mean Well SPRN01L-12 DC-DC Converter - 1W - 4.75~5.5V in 12V out	1W	12V	0.084A	IP20	View
Mean Well SPRN01L-05 DC-DC Converter - 1W - 4.75~5.5V in 5V out	1W	5V	200 Milliampere	IP20	View

Please log in to write a review.

{ "id":8442829898027, "variants" :[{ "context":"default", "variant_id": 45712963567915, "sku":"SPRN01N-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }