💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well TKA30C-C DC-DC Converter - 25W - 36~72V in ±12V out

SKU TKA30C-C
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

TKA30C-C is the +5V / ±15V output model of this series: rated power 25W, typical efficiency 82%.

Features

  • 2:1 wide input range
  • 4:1 wide input range(option)
  • 1500VDC I/O isolation
  • Built-in EMI filter
  • Remote ON-OFF control
  • Protections: Short circuit / Overload
  • Cooling by free air convection
  • Six-sided shield metal case
  • Epoxy encapsulated
  • 100% burn-in test
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty

Specifications

TKA30C-CSpecifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE
+5V / ±15V
CURRENT RANGE
700 ~ 3500mA / ±50 ~ ±250mA
RATED POWER
25W
RIPPLE & NOISE (max.)Note.2
100mVp-p
LINE REGULATIONNote.3
±1.0%
LOAD REGULATIONNote.4
+5V: ±2.0%, ±V1: ±5.0%
VOLTAGE ACCURACY
+5V: ±2.0%, ±V1: ±5.0%
SWITCHING FREQUENCY
100KHz min.

INPUT

VOLTAGE RANGE
36~72VDC
EFFICIENCY (Typ.)
82%
DC CURRENT Full load
0.64A
DC CURRENT No load
10mA
FILTER
Pi network
PROTECTION
Fuse recommended

PROTECTION (Note. 5)

OVERLOAD
110 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT
All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.
-40 ~ +85℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B , EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

REMOTE CONTROL
Power on: R.C ~-Vin > 4.5~5.5VDC or open, Power off: R.C~ -Vin <0.8VDC or short
MTBF
100Khrs min. MIL-HDBK-217F(25℃)
DIMENSION
50.8*50.8*21.0mm or 2"*2"*0.82" inch (L*W*H)
PACKING
110g ; 5pcs/per tube, 140pcs/28 tube/per carton
Test conditions and notes5
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 20% to 100% rated load.
  5. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

TKA30C-C Mechanical Specification
Mechanical Specification
TKA30C-C Packing
Packing

Downloads

FAQ

Can I use the TKA30C-C for a compact embedded control board that needs regulated 12V power?

This model provides constant-voltage 12V output with a 25W power rating. That makes it a fit for compact embedded control sections that are designed around a 36-72VAC input range and stay within 25W.

Is the TKA30C-C appropriate for low-power automation electronics inside industrial equipment?

It is intended for applications needing 12V constant-voltage output from a 36-72VAC input source. With a 25W rating, it is better aligned with low-power automation electronics than with larger 12V loads.

Can the TKA30C-C work in small control enclosures or equipment bays?

Its mechanical size is 50.8 x 50.8 x 21.0 mm and its weight is 0.11 kg, which helps where board area and overall mass matter. Electrically, it remains a 25W, 12V converter, so enclosure fit does not change the load limit.

How does the TKA30C-C compare with the TKA30C-B?

The two models share the same 25W rating, 12V output, 36-72VAC input range, constant-voltage operation, 50.8 x 50.8 x 21.0 mm dimensions, 0.11 kg weight, -40 C to +85 C operating range, CE and c_emc certifications, and 2-year warranty. The listed output current differs: TKA30C-C is 250A, while TKA30C-B is 310A.

Can the TKA30C-C be used in indoor equipment exposed to low or high ambient temperatures?

The operating temperature range is -40 C to +85 C, so the converter is specified for very cold and very warm conditions within that band. Because no IP rating is provided, the specs do not confirm suitability for direct outdoor exposure.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442876821803, "variants" :[{ "context":"default", "variant_id": 45713165910315, "sku":"TKA30C-C", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well TKA30C-C DC-DC Converter - 25W - 36~72V in ±12V out
Mean Well

Mean Well TKA30C-C DC-DC Converter - 25W - 36~72V in ±12V out

TKA30C-C is the +5V / ±15V output model of this series: rated power 25W, typical efficiency 82%.

Features

  • 2:1 wide input range
  • 4:1 wide input range(option)
  • 1500VDC I/O isolation
  • Built-in EMI filter
  • Remote ON-OFF control
  • Protections: Short circuit / Overload
  • Cooling by free air convection
  • Six-sided shield metal case
  • Epoxy encapsulated
  • 100% burn-in test
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty
View product