💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well DPRN01M-15 DC-DC Converter - 1W - 11.4~13.2V in ±15V out 34mA

SKU DPRN01M-15
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

DPRN01M-15 is the ±15V output model of this series: rated power 1W, typical efficiency 69%.

SP RN01 and DP RN01 series are 1 W isolated and regulated module type DC-DC converter with SIP 6 package. It features international standard pins, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V / 48 V -5~+10% , and various output voltage, 5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • SIP6 package with industry standard pinout
  • Operating temperature range -40 ~ +90℃
  • Comply to BS EN/EN55032 radiated Class B without additional components
  • Protection: Short circuit
  • 1.5KVDC I/O isolation
  • Low cost
  • 3 years warranty

Specifications

DPRN01M-15Specifications from the official datasheet (2024-08-02 edition)

INPUT

INPUT VOLTAGE (RANGE)
Normal 12V (11.4 ~ 13.2V)
INPUT CURRENT NO LOAD
18mA
INPUT CURRENT FULL LOAD
120mA
VOLTAGE RANGE
11.4 ~ 13.2Vdc ,
SURGE VOLTAGE (100ms max.)
5Vin models : 9Vdc ; 12Vin models : 18Vdc ; 24Vin models : 30Vdc ; 48Vin models : 60Vdc
FILTER
Internal capacitor
PROTECTION
Fuse recommended. 5Vin models: 500mA, 12Vin models: 250mA, 24Vin models: 100mA, 48Vin models: 60mA
INTERNAL POWER DISSIPATION
600mW

OUTPUT

OUTPUT VOLTAGE
±15V
OUTPUT CURRENT
±0 ~ 34mA
EFFICIENCY (TYP.)
69%
CAPACITOR LOAD (MAX.)
±47μF (for each output)
VOLTAGE ACCURACY
±3.0%
RATED POWER
1W
RIPPLE & NOISENote.2
75mVp-p
LINE REGULATIONNote.3
±1.0%
LOAD REGULATIONNote.4
±1.0%
SWITCHING FREQUENCY (Typ.)
110KHz

PROTECTION

SHORT CIRCUIT
SPRN01: Current limit protection 60 sec. max., DPRN01: 1 sec. max.

ENVIRONMENT

COOLING
Free-air convection
WORKING TEMP.
-40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE
+110℃ max.
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
0.05% / ℃ (0 ~ 71℃)
SOLDERING TEMPERATURE
1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.)
80pF
EMC EMISSION
ParameterStandardTest Level
ConductedBS EN/EN55032(CISPR32)N/A
RadiatedBS EN/EN55032(CISPR32)Class B
EMC IMMUNITY
ParameterStandardTest Level
ESDBS EN/EN61000-4-2Level 3, ±8KV air, Level 2, ±4KV contact
Radiated SusceptibilityBS EN/EN61000-4-3Level 2, 3V/m
EFT/BurstsBS EN/EN61000-4-4Level 1, 0.5KV at power, Level 2, 0.5KV at signal
SurgeBS EN/EN61000-4-5Level 2, 0.5KV Line-Line, Level 2, 1KV Line ground
ConductedBS EN/EN61000-4-6Level 2, 3V(e.m.f.)
Magnetic FieldBS EN/EN61000-4-8Level 1,1A/m

OTHERS

MTBF
1000Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H)
19.6*7.1*10.14mm (0.77*0.28*0.40 inch)
CASE MATERIAL
Non-Conductive black plastic (UL 94V-0 rated)
PACKING
2.5g ; 25pcs/per tube, 4000pcs/160 tube/per carton
Test conditions and notes5
  1. 1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc, O:48Vdc), rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 10% to 100% rated load.
  5. 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

DPRN01M-15 Mechanical Specification
Mechanical Specification
DPRN01M-15 Pin Configuration
Pin Configuration
DPRN01M-15 Packing
Packing

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch

Downloads

FAQ

Can I use the DPRN01M-15 to generate a ±15V rail inside a 12V-class industrial control board?

Yes, this model is intended for low-power constant-voltage conversion when the available input is in the 11.4~13.2VDC range. Its output is ±15V at 1W with ±34mA output current, so it fits light-duty control, signal, or interface sections rather than higher-load power sections.

Is the DPRN01M-15 suitable for low-power analog circuitry in embedded or automation equipment?

It can be a fit for embedded or automation designs that need a small ±15V constant-voltage rail and stay within the 1W rating. The compact 19.6 × 10.14 × 7.1 mm size also makes it easier to place on dense boards or in space-limited assemblies.

Can I use this converter in a compact instrumentation or signal-conditioning module?

Yes, if the module needs a low-power ±15V output and the source feeding it is 11.4~13.2VDC. With 1W total power and ±34mA output current, it is best matched to small instrumentation or conditioning stages instead of heavier control loads.

Is the DPRN01M-15 meant for outdoor or harsh exposed environments?

No IP rating is listed in the provided specs, so it should be treated as a board-level component for use inside a protected enclosure rather than as an exposed outdoor unit. Its operating temperature range is -40°C to +90°C, which supports a wide temperature envelope once it is installed in suitable equipment.

What is the difference between the DPRN01M-15 and DPRN01M-12?

Both models are 1W DC-DC converters in the same series. The DPRN01M-15 provides ±15V output at ±34mA, while the DPRN01M-12 provides ±12V output at ±42mA.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442005258539, "variants" :[{ "context":"default", "variant_id": 45708933955883, "sku":"DPRN01M-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well DPRN01M-15 DC-DC Converter - 1W - 11.4~13.2V in ±15V out 34mA
Mean Well

Mean Well DPRN01M-15 DC-DC Converter - 1W - 11.4~13.2V in ±15V out 34mA

DPRN01M-15 is the ±15V output model of this series: rated power 1W, typical efficiency 69%.

SP RN01 and DP RN01 series are 1 W isolated and regulated module type DC-DC converter with SIP 6 package. It features international standard pins, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V / 48 V -5~+10% , and various output voltage, 5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • SIP6 package with industry standard pinout
  • Operating temperature range -40 ~ +90℃
  • Comply to BS EN/EN55032 radiated Class B without additional components
  • Protection: Short circuit
  • 1.5KVDC I/O isolation
  • Low cost
  • 3 years warranty

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch
View product