Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDD03G-05 Medical Grade DC/DC Converter 3W - 18-75V input, 5 and -5V output 600mA

15V3WDC/DCMedical Grade

SKU MDD03G-05

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

MDD03G-05 is the ±5V output model of this series: rated power 3W, typical efficiency 80%.

MDS03 and MDD03 series are 3W isolated and regulated module type medical grade DC-DC converter with DIP 24 package. It features international standard pins, a high efficiency up to 81%, wide working temperature range -40~+90℃, 6KVDC or 4.2KVAC I/P-O/P high isolation voltage, compliance with IEC60601-1 medical standard, continuous-mode short circuit protection, etc. The models account for different input voltage 9~36V and 18~75V 4:1 wide input range, and various output voltage, 5V/12V/15V for single output and ±5V/±12V/±15V for dual output. Which are suitable for medical systems, ultra low leakage current.

Features

DIP 24 package with international standard pinout
4:1 wide input range
Low patient leakage current <5μA
Wide operating temperature range -40 ~ +90℃
Medical safety approved (2xMOPP) according to IEC60601-1
Protections: Short circuit (Continuous) / Overload / UVLO
6KVDC or 4.2KVAC high I/O isolation (Reinforced isolation)
3 years warranty

Specifications

MDD03G-05Specifications from the official datasheet (2025-07-28 edition)

INPUT

INPUT VOLTAGE (RANGE): Normal 24V,48V (18 ~ 75V)
INPUT CURRENT NO LOAD: 15mA
INPUT CURRENT FULL LOAD: 158mA
VOLTAGE RANGE: 18 ~ 75Vdc
SURGE VOLTAGE (100ms max.): F models : 50Vdc ; G models : 100Vdc
FILTER: Pi type
PROTECTION (Typ.): Fuse recommended. F models: 2A slow-blow Type, G models: 1A slow-blow Type

OUTPUT

OUTPUT VOLTAGE: ±5V
OUTPUT CURRENT: ±30 ~ 300mA
EFFICIENCY (TYP.): 80%
CAPACITOR LOAD (MAX.)^{* For each output}: *220μF
VOLTAGE ACCURACY: ±2%
RATED POWER: 3W
RIPPLE & NOISE^Note.2: 150mVp-p
LINE REGULATION^Note.3: ±0.5%
LOAD REGULATION^Note.4: ±0.5%
SWITCHING FREQUENCY (Typ.): 250KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 110 ~ 250% rated output power Protection type : Recovers automatically after fault condition is removed
UNDER VOLTAGE LOCKOUT Start-up voltage: 8.8Vdc
UNDER VOLTAGE LOCKOUT Shutdown voltage: 8Vdc

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.05% / ℃ (0 ~ 71℃)
SOLDERING TEMPERATURE: 1.5mm from case of 3 ~ 5sec./265℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS: IEC60601-1(LVD) 3rd edition, EAC TP TC 020/2011(EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE: I/P-O/P:6KVDC or 4.2KVAC
ISOLATION RESISTANCE: I/P-O/P:1000M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION LEVEL: Primary-secondary: 2xMOPP when system input voltage is with 250VAC, 50/60Hz
ISOLATION CAPACITANCE (Typ.): 20pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55011 N/A
Radiated BS EN/EN55011 Class A without external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 ±15KV air
Radiated Susceptibility BS EN/EN61000-4-3 10V/m
EFT/Bursts BS EN/EN61000-4-4 ±2KV
Surge BS EN/EN61000-4-5 ±2KV Line-Line
Conducted BS EN/EN61000-4-6 10Vrms(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 30A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55011	N/A
Radiated	BS EN/EN55011	Class A without external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	±15KV air
Radiated Susceptibility	BS EN/EN61000-4-3	10V/m
EFT/Bursts	BS EN/EN61000-4-4	±2KV
Surge	BS EN/EN61000-4-5	±2KV Line-Line
Conducted	BS EN/EN61000-4-6	10Vrms(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	30A/m

OTHERS

MTBF: >454Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 31.8*20.3*12.2mm (1.25*0.8*0.48 inch)
CASE MATERIAL: UL94V-0 plastic case
PACKING: 17g ; 15pcs/per tube, 750pcs/50 tube max./carton

Test conditions and notes5

1.All parameters are specified at normal input(F: 12Vdc, G: 24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load for MDD03.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDD03G-05 Mechanical Specification — Mechanical Specification

MDD03G-05 Plug Assignment — Plug Assignment

MDD03G-05 MDS03 & MDD03 series — MDS03 & MDD03 series

MDD03G-05 MDS03 & MDD03 series (2) — MDS03 & MDD03 series (2)

Typical applications

Downloads

Certificates2

Mean Well MDS(D)03-MDS(D)06-CE-dec Certificate PDF Download

Mean Well MDD-MDS03-06-UK-dec Certificate PDF Download

Test reports1

Mean Well MDD03G-05 Test Report PDF Download

FAQ

Can I use the MDD03G-05 in a medical monitor or patient-adjacent embedded system that needs 5V rails?

This model is a 3W constant-voltage DC/DC converter with ±5V output at up to 300mA per output, so it fits low-power 5V medical or embedded subcircuits that stay within that output limit. Its medical-grade positioning and IEC60601-1 3rd edition (2xMOPP) and EAC approvals make it appropriate for regulated equipment designs where those approvals matter.

Is the MDD03G-05 suitable for industrial control electronics that need isolated low-power 5V conversion?

It can fit compact industrial control or automation electronics that need ±5V rails and draw no more than 300mA per output from a 3W converter. The 18-75V input range also suits systems built around a wide nominal DC bus within that stated range.

Can this converter power 5V logic in embedded automation or data acquisition boards?

Yes, it is aligned with low-power 5V logic sections in embedded or data acquisition designs, provided the load stays within ±5V and 300mA per output. The small 31.8 × 20.3 × 12.2 mm package also helps where board or enclosure space is limited.

Which MDD03G model should I choose: 5V, 12V, or 15V?

Within this 3W series, the MDD03G-05 provides ±5V at 300mA, the MDD03G-12 provides ±12V at 125mA, and the MDD03G-15 provides ±15V at 100mA per output. All three share the same 18-75V input range, 31.8 × 20.3 × 12.2 mm dimensions, 0.017 kg weight, and -40°C to +90°C operating temperature range.

Is the MDD03G-05 suitable for outdoor or harsh-temperature installations?

The operating temperature range is -40°C to +90°C (with derating per the derating curve), so the temperature spec supports use across a wide range of enclosed equipment environments. No IP rating is listed in the provided specs, so outdoor exposure or washdown suitability cannot be confirmed from this data alone.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDD03G-15 Medical Grade DC/DC Converter 3W - 18-75V input, 15 and -15V output 200mA	3W	15V	0.2A	IP20	View
Mean Well MDD03G-12 Medical Grade DC/DC Converter 3W - 18-75V input, 12 and -12V output 250mA	3W	12V	0.25A	IP20	View
Mean Well MDD03F-15 Medical Grade DC/DC Converter 3W - 9-36V input, 15 and -15V output 200mA	3W	15V	0.2A	IP20	View
Mean Well MDD03F-12 Medical Grade DC/DC Converter 3W - 9-36V input, 12 and -12V output 250mA	3W	12V	0.25A	IP20	View
Mean Well MDD03F-05 Medical Grade DC/DC Converter 3W - 9-36V input, 5 and -5V output 600mA	3W	5V	0.6A	IP20	View

Please log in to write a review.

{ "id":8442605535531, "variants" :[{ "context":"default", "variant_id": 45711590031659, "sku":"MDD03G-05", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }