Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SPB09C-24 DC-DC Converter - 9W - 36~75V in 24V out

SKU SPB09C-24

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SPB09C-24 is the 24V output model of this series: rated power 9W, typical efficiency 89%.

SP B09 and DP B09 series are 9 W isolated and regulated module type DC-DC converter with SIP 8 package. It features international standard pins, a high efficiency up to 89%, wide working temperature range -40~+ 90℃, 1 . 5 KVDC I/P-O/P isolation voltage, continuous -mode short circuit protection, etc. The models account for different input voltage 9~18V and 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3 . 3V /5V/12V/15V /24V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP8 package with industry standard pinout
2:1 wide input range
Operating temperature range -40 ~ +90℃
No minimum load required
High efficiency up to 89%
Protections: Short circuit (Continuous) / Overload / Input under voltage
1.5KVDC I/O isolation
Remote ON/OFF control
9V model available(optional)
3 years warranty

Specifications

SPB09C-24Specifications from the official datasheet (2024-08-02 edition)

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE): Normal 48V (36 ~ 75V)
INPUT CURRENT NO LOAD: 15mA
INPUT CURRENT FULL LOAD: 211mA
OUTPUT VOLTAGE: 24V
OUTPUT CURRENT: 0 ~ 375mA
EFFICIENCY (TYP.): 89%
CAPACITOR LOAD (MAX.): 100μF

INPUT

VOLTAGE RANGE: 36~75Vdc
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 12Vin models: 2A Slow-Blow, 24Vin models: 1A Slow-Blow Type, 48Vin models: 600mA Slow-Blow Type

OUTPUT

VOLTAGE ACCURACY: ±1.5%
RATED POWER: 9W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: 0.5%
LOAD REGULATION^Note.4: Single output models: ±0.5% (±1% for 3.3Vout model), Dual output models:±0.5%
SWITCHING FREQUENCY (Min.): 400KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 120 ~ 250% rated output power Protection type : Recovers automatically after fault condition is removed

FUNCTION

REMOTE CONTROL: Power ON: R.C. ~ -Vin >2.5Vdc or open circuit ; Power OFF: R.C. ~ -Vin <0.8Vdc or short

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +115℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.03% / ℃ (0 ~ 70℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS: EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 500pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032(CISPR32) N/A
Radiated BS EN/EN55032(CISPR32) Class A/B with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, ±8KV air, Level 2±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 2, 0.5KV at power
Surge BS EN/EN61000-4-5 Level 2, 0.5KV Line-Line
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032(CISPR32)	N/A
Radiated	BS EN/EN55032(CISPR32)	Class A/B with external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, ±8KV air, Level 2±4KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 2, 0.5KV at power
Surge	BS EN/EN61000-4-5	Level 2, 0.5KV Line-Line
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m

OTHERS

MTBF: 275Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 24*9.6*11.2mm (0.94*0.38*0.44 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 5g ; 21pcs/per tube, 2100pcs/100 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SPB09C-24 Mechanical Specification — Mechanical Specification

SPB09C-24 Plug Assignment — Plug Assignment

SPB09C-24 Remote ON/OFF Control — Remote ON/OFF Control

Typical applications

Downloads

Certificates3

Certificate (SPB09-DPB09-EMC)(EN) PDF Download

Certificate (SPB09-DPB09-CE-dec)(EN) PDF Download

Certificate (SPB-DPB09-UK-dec)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SPB09C-24 for a 24V industrial control or relay interface load?

Yes, if the load requires constant 24V and the source feeding the converter is within 36-75VDC. This model is rated for 9W output and listed at 375mA output current, so the connected 24V load needs to fall within those specs.

Is this a good fit for compact 24V embedded automation electronics?

It can fit compact 24V embedded electronics that need constant voltage and modest power draw. The unit delivers 24V output, is rated for 9W, and measures 24 x 9.6 x 11.2 mm.

Can the SPB09C-24 be used for low-power 24V monitoring or signaling equipment?

This converter is intended for constant 24V output applications powered from 36-75VDC input. With a 9W rating, it is better matched to lower-power 24V monitoring, signaling, or interface loads than larger 24V devices.

Would the SPB09C-24 work where board area and weight are tightly constrained?

Its compact size of 24 x 9.6 x 11.2 mm and weight of 5g make it suitable for space-sensitive designs. Those mechanical traits pair with a constant 24V output and 9W power class.

Is the SPB09C-24 suitable for outdoor equipment cabinets?

The thermal specification is -40°C to +90°C, which supports operation across a wide temperature range. No IP rating is listed in the provided data, so outdoor suitability depends on using an enclosure appropriate for the environment.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well SPB09C-15 DC-DC Converter - 9W - 36~75V in 15V out 600mA	9W	15V	600 Milliampere	IP20	View
Mean Well SPB09C-12 DC-DC Converter - 9W - 36~75V in 12V out 750mA	9W	12V	750 Milliampere	IP20	View
Mean Well SPB09C-05 DC-DC Converter - 9W - 36~75V in 5V out 1.6A	9W	5V	1.6A	IP20	View
Mean Well SPB09C-03 DC-DC Converter - 9W - 36~75V in 3.3V out 2A	9W	3.3V	2A	IP20	View
Mean Well SPB09B-24 DC-DC Converter - 9W - 18~36V in 24V out 375mA	9W	24V	375 Milliampere	IP20	View
Mean Well SPB09B-15 DC-DC Converter - 9W - 18~36V in 15V out 600mA	9W	15V	600 Milliampere	IP20	View
Mean Well SPB09B-12 DC-DC Converter - 9W - 18~36V in 12V out 750mA	9W	12V	750 Milliampere	IP20	View
Mean Well SPB09B-05 DC-DC Converter - 9W - 18~36V in 5V out 1.6A	9W	5V	1.6A	IP20	View
Mean Well SPB09B-03 DC-DC Converter - 9W - 18~36V in 3.3V out 2A	9W	3.3V	2A	IP20	View
Mean Well SPB09A-24 DC-DC Converter - 9W - 9~18V in 24V out 375mA	9W	24V	375 Milliampere	IP20	View
Mean Well SPB09A-15 DC-DC Converter - 9W - 9~18V in 15V out 600mA	9W	15V	600 Milliampere	IP20	View
Mean Well SPB09A-12 DC-DC Converter - 9W - 9~18V in 12V out 750mA	9W	12V	750 Milliampere	IP20	View
Mean Well SPB09A-05 DC-DC Converter - 9W - 9~18V in 5V out 1.6A	9W	5V	1.6A	IP20	View
Mean Well SPB09A-03 DC-DC Converter - 9W - 9~18V in 3.3V out 2A	9W	3.3V	2A	IP20	View

Please log in to write a review.

{ "id":8442825474347, "variants" :[{ "context":"default", "variant_id": 45712949608747, "sku":"SPB09C-24", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }