Over 15 years experience of providing support of MEAN WELL Power Supplies
The ELG-100 is a 95.76W Mean Well AC-DC LED driver (input: 100~305VAC, output: 36V, operating temperature: -40~+90Β°C).
Key Features
- β Input voltage: 100~305VAC
- β Output voltage: 36V
- β Rated output current: 2.66A
- β Ingress protection: IP65
- β Operating temperature: -40~+90Β°C
- β Safety certifications: BSI, CB, CCC, CE, EAC, ENEC, RCM, UL
- β 5 year warranty
-
BrandMean Well
-
SeriesELG Series
-
Power Rating95.76 Watt
-
Output Voltage36 Volt
-
Rated Current2.66 Ampere
-
Input Voltage100V~305V
-
Standards MetBSI,CB,CCC,CE,EAC,ENEC,RCM,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40Β°C~90Β°C
-
Warranty5 Year
-
Length19.9 cm
-
Width6.3 cm
-
Height3.55 cm
-
Weight0.85 kg
::specification::
Frequently Asked Questions
Can I use the ELG-100-36AB with a 1-10V wall dimmer to control 36V LED strip brightness?
Yes. The ELG-100-36AB accepts both 1-10V and PWM dimming signals, so a standard 1-10V wall dimmer or lighting controller can smoothly vary the 36V LED strip output. It also has a built-in potentiometer for setting the maximum output level before the dimmer range is applied.
Is the ELG-100-36AB a good choice for a BMS or building automation system controlling 36V LED fixtures?
Yes. Its 1-10V dimming input is compatible with most BMS and building automation lighting outputs. Combined with 95.76W at 36V and adjustable output, it gives both automated percentage control and a fixed maximum set point, which is useful in office or commercial LED lighting systems.
Can the ELG-100-36AB power 36V LED strip for museum or gallery accent lighting with dimming?
Yes. The combination of PWM/1-10V dimming and adjustable current output makes the ELG-100-36AB suitable for display and accent lighting where precise, flicker-free brightness control is important. At 95.76W and 36V it can supply a substantial LED strip run in a gallery or retail showroom.
How many meters of 36V LED strip can the ELG-100-36AB drive?
The ELG-100-36AB provides up to 95.76W at 36V. Divide 95.76 by your strip's power per meter to get the maximum run. For a strip rated at 12W/m, that is approximately 7.98 meters (95.76W / 12W per meter). Always check your strip's rated power per meter and stay within 95.76W total load.
Is the ELG-100-36AB waterproof enough for a damp equipment room or covered outdoor soffit?
The ELG-100-36AB is IP65 rated, protecting against low-pressure water jets and full dust ingress. This is adequate for damp indoor environments and covered outdoor locations. For fully exposed outdoor rain or wet-location use, the IP67-rated ELG-100-36B or ELG-100-36 would provide a higher level of protection.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other ELG-100 Models
5 other models| Model | Power | Voltage | Current | IP Rating | |
|---|---|---|---|---|---|
| Mean Well S-ELG-100-24-3Y Power Supply 96W 24V 4A β 3-Wire Input (with Earth) | 96W | 24V | 4A | IP67 | View |
| Mean Well ELG-100-24DA-3Y Power Supply 96W 24V - DALI 4A β 3-Wire Input (with Earth) | 96W | 24V | 4A | IP67 | View |
| Mean Well ELG-100-24B-3Y Power Supply 96W 24V - Dimmable 4A β 3-Wire Input (with Earth) | 100W | 24V | 4A | IP67 | View |
| Mean Well ELG-100-24AB Power Supply 100W 24V - Adjustable and Dimmable 4A | 96W | 24V | 4A | IP65 | View |
| Mean Well ELG-100-48DA-3Y Power Supply 96W 48V - DALI 2A β 3-Wire Input (with Earth) | 96W | 48V | 2A | IP67 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your reviewβ¦
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
