Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDD01M-12N SIP Package DC-DC Converter- 1W - ±12V Out 42mA

Input 10.8~13.2VSIP7 package with international standard pinoutmedical gradelow cost

SKU MDD01M-12N

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

MDD01M-12N is the ±12V output model of this series: rated power 1W, typical efficiency 80%.

MDS01-N and MDD01-N series are 1W isolated and unregulated module type medical grade DC-DC converter with SIP7 package. It features international standard pins, a high efficiency up to 84%, wide working temperature range -40~+95℃, 6KVDC I/P-O/P hi-ght isolation voltage, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for medical systems, ultra low leakage current or industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP7 package with international standard pinout
Operating temperature range -40 ~ +95℃
Comply with IEC/UL62368-1 and LVD IEC60601-1
Medical safety approved (1xMOPP/2xMOOP) according to IEC60601-1
Low patient leakage current <2μA
Protections: Short circuit (Continuous)
6KVDC hi-ght I/O isolation (Reinforced insulation)
Low cost
3 years warranty

Specifications

MDD01M-12NSpecifications from the official datasheet (2024-08-12 edition)

INPUT

INPUT VOLTAGE (RANGE): Normal 12V (10.8 ~ 13.2V)
VOLTAGE RANGE: 10.8 ~ 13.2Vdc
INPUT CURRENT (NO LOAD): 18mA
INPUT CURRENT (FULL LOAD): 104mA
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 500mA Slow-Blow Type for all models

OUTPUT

OUTPUT VOLTAGE: ±12V
OUTPUT CURRENT: ±5 ~ 42mA
EFFICIENCY^(Typ.): 80%
CAPACITOR LOAD^(Max.): *100μF
VOLTAGE ACCURACY: ±5.0%
RATED POWER: 1W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: 1.2% for 1% input variation
LOAD REGULATION^Note.4: ±15% for 3.3Vo, 5Vo ; ±10% for others
SWITCHING FREQUENCY^(Typ.): 30KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +95℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.02% / ℃ (0 ~ 90℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: IEC62368-1 / UL62368-1, LVD IEC60601-1, EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:6KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION LEVEL: Primary-secondary: 1xMOPP / 2xMOOP when system input voltage is with 250VAC
ISOLATION CAPACITANCE^(Typ.): 10pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032, BS EN/EN55011 Class A/B with external components
Radiated BS EN/EN55032, BS EN/EN55011 Class A/B with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV / 5KHz
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line to Ground
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032, BS EN/EN55011	Class A/B with external components
Radiated	BS EN/EN55032, BS EN/EN55011	Class A/B with external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV / 5KHz
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line to Ground
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m

OTHERS

MTBF: 15000Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.7*7.1*11.5mm (0.775*0.279*0.452 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.8g ; 24pcs/per tube, 2160pcs/90 tube/per carton

Test conditions and notes6

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Patient leakage current(2μA max.) and reinforced isolation is based on a 250VAC, 50/60Hz system input voltage.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDD01M-12N Mechanical Specification — Mechanical Specification

MDD01M-12N EMC Suggestion — EMC Suggestion

Typical applications

Downloads

Datasheet1

MDD01M-12N datasheetMDD01_N_spec.pdf · 2024-08-12 edition PDF Download

FAQ

What type of product is the Mean Well MDD01M-12N?

The Mean Well MDD01M-12N is a 1W SIP package DC-DC converter module. This specific model provides a ±12V output and is part of Mean Well's modular DC-DC converter range for compact embedded power applications.

What are the key electrical specifications of the MDD01M-12N?

This model is rated for 1W output power and ±12V output. The listed rated current for this product is 18 mA, and the series includes reinforced 6KVDC input-to-output isolation along with continuous short circuit protection.

Is the MDD01M-12N suitable for medical or safety-sensitive equipment?

Yes, the MDD01M-12N is medical safety approved to IEC60601-1 with 1xMOPP/2xMOOP support. It also features low patient leakage current below 2 microamps and complies with IEC/UL62368-1 and LVD IEC60601-1 as listed for the series.

Can the MDD01M-12N be used in harsh temperature environments?

The MDD01M-12N is designed for wide-temperature operation from -40°C to +95°C. That makes it suitable for industrial and embedded applications where compact power modules need to perform across demanding ambient conditions.

What physical size should I expect for the MDD01M-12N?

The module measures 19.7 x 7.1 x 11.5 mm and weighs 2.8 g. Its compact SIP7 package helps it fit space-constrained designs that require an isolated DC-DC converter.

What protections and reliability features does the MDD01M-12N include?

The MDD01M-12N includes continuous short circuit protection and overload protection that shuts down the output when rated power reaches 102% or more, then auto-recovers. Mean Well also lists a 3-year warranty for this model.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDD01N-15N SIP Package DC-DC Converter- 1W - ±15V Out 33mA	1W	15V	0.0333A	IP20	View
Mean Well MDD01N-12N SIP Package DC-DC Converter- 1W - ±12V Out 42mA	1W	12V	0.0417A	IP20	View
Mean Well MDD01N-05N SIP Package DC-DC Converter- 1W - ±5V out 100mA	1W	5V	0 Milliampere	IP20	View
Mean Well MDD01M-15N SIP Package DC-DC Converter- 1W - ±15V Out 33mA	1W	15V	0.0333A	IP20	View
Mean Well MDD01M-05N SIP Package DC-DC Converter- 1W - ±5V out 100mA	1W	5V	0 Milliampere	IP20	View
Mean Well MDD01L-15N SIP Package DC-DC Converter- 1W - ±15V Out 33mA	1W	15V	0.0333A	IP20	View
Mean Well MDD01L-12N SIP Package DC-DC Converter- 1W - ±12V Out 42mA	1W	12V	0.0417A	IP20	View
Mean Well MDD01L-05N SIP Package DC-DC Converter- 1W - ±5V out 100mA	1W	5V	0.1A	IP20	View
Mean Well MDD01M-09 DC-DC Converter - 1W - 10.8~13.2V in ±9V out 56mA	1W	9V	0.056A	IP20	View
Mean Well MDD01N-15 DC-DC Converter - 1W - 21.6~26.4V in ±15V out 34mA	1W	15V	0.034A	IP20	View
Mean Well MDD01N-12 DC-DC Converter - 1W - 21.6~26.4V in ±12V out 42mA	1W	12V	0.042A	IP20	View
Mean Well MDD01N-09 DC-DC Converter - 1W - 21.6~26.4V in ±9V out 56mA	1W	9V	0.056A	IP20	View
Mean Well MDD01N-05 DC-DC Converter - 1W - 21.6~26.4V in ±5V out 100mA	1W	5V	100 Milliampere	IP20	View
Mean Well MDD01M-15 DC-DC Converter - 1W - 10.8~13.2V in ±15V out 34mA	1W	15V	0.034A	IP20	View
Mean Well MDD01M-12 DC-DC Converter - 1W - 10.8~13.2V in ±12V out 42mA	1W	12V	0.042A	IP20	View
Mean Well MDD01M-05 DC-DC Converter - 1W - 10.8~13.2V in ±5V out 100mA	1W	5V	100 Milliampere	IP20	View

Please log in to write a review.

{ "id":9596803547435, "variants" :[{ "context":"default", "variant_id": 49368156897579, "sku":"MDD01M-12N", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }