Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDD01M-15N SIP Package DC-DC Converter- 1W - ±15V Out 33mA

Input 10.8~13.2VSIP7 package with international standard pinoutmedical gradelow cost

SKU MDD01M-15N

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

MDD01M-15N is the ±15V output model of this series: rated power 1W, typical efficiency 80%.

MDS01-N and MDD01-N series are 1W isolated and unregulated module type medical grade DC-DC converter with SIP7 package. It features international standard pins, a high efficiency up to 84%, wide working temperature range -40~+95℃, 6KVDC I/P-O/P hi-ght isolation voltage, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for medical systems, ultra low leakage current or industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP7 package with international standard pinout
Operating temperature range -40 ~ +95℃
Comply with IEC/UL62368-1 and LVD IEC60601-1
Medical safety approved (1xMOPP/2xMOOP) according to IEC60601-1
Low patient leakage current <2μA
Protections: Short circuit (Continuous)
6KVDC hi-ght I/O isolation (Reinforced insulation)
Low cost
3 years warranty

Specifications

MDD01M-15NSpecifications from the official datasheet (2024-08-12 edition)

INPUT

INPUT VOLTAGE (RANGE): Normal 12V (10.8 ~ 13.2V)
VOLTAGE RANGE: 10.8 ~ 13.2Vdc
INPUT CURRENT (NO LOAD): 18mA
INPUT CURRENT (FULL LOAD): 114mA
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 500mA Slow-Blow Type for all models

OUTPUT

OUTPUT VOLTAGE: ±15V
OUTPUT CURRENT: ±4 ~ 34mA
EFFICIENCY^(Typ.): 80%
CAPACITOR LOAD^(Max.): *100μF
VOLTAGE ACCURACY: ±5.0%
RATED POWER: 1W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: 1.2% for 1% input variation
LOAD REGULATION^Note.4: ±15% for 3.3Vo, 5Vo ; ±10% for others
SWITCHING FREQUENCY^(Typ.): 30KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +95℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.02% / ℃ (0 ~ 90℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: IEC62368-1 / UL62368-1, LVD IEC60601-1, EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:6KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION LEVEL: Primary-secondary: 1xMOPP / 2xMOOP when system input voltage is with 250VAC
ISOLATION CAPACITANCE^(Typ.): 10pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032, BS EN/EN55011 Class A/B with external components
Radiated BS EN/EN55032, BS EN/EN55011 Class A/B with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV / 5KHz
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line to Ground
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032, BS EN/EN55011	Class A/B with external components
Radiated	BS EN/EN55032, BS EN/EN55011	Class A/B with external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV / 5KHz
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line to Ground
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m

OTHERS

MTBF: 15000Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.7*7.1*11.5mm (0.775*0.279*0.452 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.8g ; 24pcs/per tube, 2160pcs/90 tube/per carton

Test conditions and notes6

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Patient leakage current(2μA max.) and reinforced isolation is based on a 250VAC, 50/60Hz system input voltage.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDD01M-15N Mechanical Specification — Mechanical Specification

MDD01M-15N EMC Suggestion — EMC Suggestion

Typical applications

Downloads

Datasheet1

MDD01M-15N datasheetMDD01_N_spec.pdf · 2024-08-12 edition PDF Download

FAQ

What are the key output and power specs of the Mean Well MDD01M-15N?

The MDD01M-15N is a 1W SIP-package DC-DC converter with a ±15V output. Its rated output current is 18mA, making it suitable for low-power isolated power requirements where a compact dual-output module is needed.

What kinds of applications is the MDD01M-15N typically used for?

This model is best suited to compact embedded and industrial electronics that need isolated low-power DC-DC conversion in a SIP7 footprint. Its reinforced 6KVDC input-to-output isolation and medical safety positioning also make it relevant for space-constrained equipment where isolation performance is important.

Is the Mean Well MDD01M-15N suitable for medical equipment designs?

The product description states that the MDD01M-15N is medically safety approved according to IEC60601-1 with 1xMOPP/2xMOOP. It also specifies low patient leakage current below 2uA, which is a relevant characteristic for medical-related applications.

How does the MDD01M-15N perform in harsh temperature conditions?

This converter is rated for operation from -40C to +95C. That wide operating range makes it a practical option for equipment exposed to demanding ambient conditions beyond normal room temperature environments.

What protection and isolation features does the MDD01M-15N include?

The MDD01M-15N includes continuous short-circuit protection and overload behavior that shuts down the output when rated power reaches 102% or more, then auto-recovers. It also features 6KVDC input-to-output isolation with reinforced insulation for higher isolation performance in compact designs.

How compact is the MDD01M-15N compared with larger board-level power converters?

The MDD01M-15N uses a SIP7 package and measures 19.7 x 7.1 x 11.5 mm, with a weight of 2.8 g. Compared with larger enclosed or chassis-style converters, it is intended for designs where board space and low weight matter.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDD01N-15N SIP Package DC-DC Converter- 1W - ±15V Out 33mA	1W	15V	0.0333A	IP20	View
Mean Well MDD01N-12N SIP Package DC-DC Converter- 1W - ±12V Out 42mA	1W	12V	0.0417A	IP20	View
Mean Well MDD01N-05N SIP Package DC-DC Converter- 1W - ±5V out 100mA	1W	5V	0 Milliampere	IP20	View
Mean Well MDD01M-12N SIP Package DC-DC Converter- 1W - ±12V Out 42mA	1W	12V	0.0417A	IP20	View
Mean Well MDD01M-05N SIP Package DC-DC Converter- 1W - ±5V out 100mA	1W	5V	0 Milliampere	IP20	View
Mean Well MDD01L-15N SIP Package DC-DC Converter- 1W - ±15V Out 33mA	1W	15V	0.0333A	IP20	View
Mean Well MDD01L-12N SIP Package DC-DC Converter- 1W - ±12V Out 42mA	1W	12V	0.0417A	IP20	View
Mean Well MDD01L-05N SIP Package DC-DC Converter- 1W - ±5V out 100mA	1W	5V	0.1A	IP20	View
Mean Well MDD01M-09 DC-DC Converter - 1W - 10.8~13.2V in ±9V out 56mA	1W	9V	0.056A	IP20	View
Mean Well MDD01N-15 DC-DC Converter - 1W - 21.6~26.4V in ±15V out 34mA	1W	15V	0.034A	IP20	View
Mean Well MDD01N-12 DC-DC Converter - 1W - 21.6~26.4V in ±12V out 42mA	1W	12V	0.042A	IP20	View
Mean Well MDD01N-09 DC-DC Converter - 1W - 21.6~26.4V in ±9V out 56mA	1W	9V	0.056A	IP20	View
Mean Well MDD01N-05 DC-DC Converter - 1W - 21.6~26.4V in ±5V out 100mA	1W	5V	100 Milliampere	IP20	View
Mean Well MDD01M-15 DC-DC Converter - 1W - 10.8~13.2V in ±15V out 34mA	1W	15V	0.034A	IP20	View
Mean Well MDD01M-12 DC-DC Converter - 1W - 10.8~13.2V in ±12V out 42mA	1W	12V	0.042A	IP20	View
Mean Well MDD01M-05 DC-DC Converter - 1W - 10.8~13.2V in ±5V out 100mA	1W	5V	100 Milliampere	IP20	View

Please log in to write a review.

{ "id":9596803973419, "variants" :[{ "context":"default", "variant_id": 49368157454635, "sku":"MDD01M-15N", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }