Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well DDRH-45-12DR Ultra Wide Input DC-DC Converter, 45W 12V, Din Rail Type 3.75A

150~1500VDC 10:1 ultra-wide input rangefanless design-40~80°C ultra-wide operating temperature

SKU DDRH-45-12DR

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

DDRH-45-12DR is the 12V output model of this series: rated power 45W, typical efficiency 85%.

DDRH-45 series is a 150 ~ 1500Vdc high reliable ultra-high input DC-DC converter which can supply stable working voltage for the load. Main features are as following: compact size, -40~+80℃ wide range operating temperature, 4KVac high isolation voltage, operation at 5000m altitude, low ripple & noise, complete protections and so on. Futhermore, this series also has DIN Rail type, it is suitable to be mounted on TS-35/7.5 or TS-35/15 rails. DDRH-45 is designed to meet UL1741and IEC62109-1 standard. It is suitable for industrial automation, surveillance, telecommunication and can be widely deployed in the applications of new energy generation such as solar power, and windmill power generation, for instances, photovoltaic power systems, high voltage inverting , DC bus centralized application , ESS, charging pile, railway and so forth.

Features

150~1500Vdc 10:1 ultra-wide input range
4KVac I/O high isolation(Reinforced isolation)
Protections: Short circuit / Overload / Over voltage / DC input under voltage / DC input reverse Polarity
Fanless design, fully encapsulated, cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15 (DR-Type)
-40~+80℃ ultra-wide operating temperature (＞+50℃ derating)
Operating altitude up to 5000 meters
3 years warranty

Specifications

DDRH-45-12DRSpecifications from the official datasheet (2024-10-18 edition)

INPUT

INPUT VOLTAGE (RANGE): Nominal 800Vdc (150~1500Vdc)
INPUT CURRENT NO LOAD: 0.2mA
INPUT CURRENT FULL LOAD: 75mA
VOLTAGE RANGE: 150 ~ 1500Vdc
FILTER: Internal capacitor
EXTERNAL INPUT FUSE: 4A/1500Vdc, required (Please refer to page 6 for more details)
INRUSH CURRENT (Typ.): Cold start 150A max. @ Vin=800Vdc

OUTPUT

OUTPUT VOLTAGE: 12V
OUTPUT CURRENT: 3.75A
EFFICIENCY (Typ.): 85%
CAPACITOR LOAD (MAX.): 3750μF
VOLTAGE ACCURACY: ±2.0%
RATED POWER: 45W
RIPPLE & NOISE^Note.2: 12 ~ 24Vo: 100mVp-p 48Vo: 150mVp-p
LINE REGULATION: ±1%
LOAD REGULATION: ±1% (10% Load to Full Load)
SWITCHING FREQUENCY (Typ.): 28 ~ 75.6KHz
HOLD UP TIME: 20ms min. @Vin=800Vdc
SETUP TIME: 2s max. @150~1500Vdc

PROTECTION

SHORT CIRCUIT: Protection type : Hiccup mode, continuous, automatic recovery
OVERLOAD: 110 ~ 300% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: Hiccup mode, recovers automatically after fault condition is removed
DC INPUT REVERSE POLARITY: By internal Bridge Diode, no damage, recovers automatically after fault condition removed
DC INPUT UNDER VOLTAGE LOCKOUT Start-up voltage: 132Vdc
DC INPUT UNDER VOLTAGE LOCKOUT Shutdown voltage: 121Vdc

ENVIRONMENT

WORKING TEMP.: -40 ~ +80℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.02% / ℃ (-40℃ ~ 50℃) Typ.
VIBRATION: Meets: MIL.STD-810F Table 514.5C-VⅢ, 15-2000Hz, X,Y,Z axis, 1hr (each axis), total 3hrs
OPERATING ALTITUDE^Note.3: 5000 meters
OVER VOLTAGE CATEGORY: Ⅱ; According to EN62109-1; altitude up to 5000 meters

SAFETY & EMC (Note.4)

SAFETY STANDARDS: UL1741 , CSA C22.2 No.107.1-16 , IEC62109-1 (LVD), EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:4KVac
ISOLATION RESISTANCE: I/P-O/P, 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 Class A (with external components)
Radiated BS EN/EN55032 Class A (with external components)
EMC IMMUNITY: BS EN/EN55035

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact, criteria A
Radiated Susceptibility BS EN/EN61000-4-3 Level 3, 10V, criteria A
EFT/Bursts BS EN/EN61000-4-4 Level 2, 0.5KV, criteria A
Surge BS EN/EN61000-4-5 Level 4, 2KV/Vin+ ~ Vin-, criteria A
Conducted BS EN/EN61000-4-6 Level 3, 10V, criteria A

Parameter	Standard	Test Level
Conducted	BS EN/EN55032	Class A (with external components)
Radiated	BS EN/EN55032	Class A (with external components)

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact, criteria A
Radiated Susceptibility	BS EN/EN61000-4-3	Level 3, 10V, criteria A
EFT/Bursts	BS EN/EN61000-4-4	Level 2, 0.5KV, criteria A
Surge	BS EN/EN61000-4-5	Level 4, 2KV/Vin+ ~ Vin-, criteria A
Conducted	BS EN/EN61000-4-6	Level 3, 10V, criteria A

OTHERS

MTBF: 316Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): P Type: 89*63.5*25mm, ST Type: 135*70*32mm, DR Type: 135*70*43.5mm
CASE MATERIAL: Non-conductive black plastic (UL 94V-0 rated)
POTTING MATERIAL: UL 94V-0
PIN MATERIAL: Base: copper, Plating: Matte Tin
PACKING: P Type : 240g ; 6pcs/Tray, 18pcs/per carton ST Type : 305g ; 6pcs/Tray, 18pcs/per carton DR Type : 310g ; 6pcs/Tray, 18pcs/per carton

Test conditions and notes4

1. All parameters NOT specially mentioned are measured at 800Vdc input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
3. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

Technical drawings

DDRH-45-12DR ‧Tolerance: x.x±0.7mm (x.x±0.0275") — ‧Tolerance: x.x±0.7mm (x.x±0.0275")

DDRH-45-12DR ‧Tolerance: x.x±0.7mm (x.x±0.0275") (2) — ‧Tolerance: x.x±0.7mm (x.x±0.0275") (2)

DDRH-45-12DR DDRH-45-xxST (Screw Terminal Type) — DDRH-45-xxST (Screw Terminal Type)

DDRH-45-12DR DDRH-45-xxDR (DIN Rail Type) — DDRH-45-xxDR (DIN Rail Type)

DDRH-45-12DR Installation Instruction(DDRH-45-xxDR only) — Installation Instruction(DDRH-45-xxDR only)

DDRH-45-12DR External Fuse Wiring Instruction — External Fuse Wiring Instruction

DDRH-45-12DR DDRH-45-xxST — DDRH-45-xxST

DDRH-45-12DR DDRH-45-xxDR — DDRH-45-xxDR

Typical applications

Downloads

Datasheet1

DDRH-45-12DR datasheetDDRH_45_spec_sheet.pdf · 2024-10-18 edition PDF Download

FAQ

Can I use the DDRH-45-12DR in a solar-powered remote monitoring station?

Yes. The DDRH-45-12DR accepts 150–1500VDC input, making it well suited for solar arrays or battery banks that produce high and variable bus voltages. It delivers 12V at up to 3.75A (45W) to power sensing and communication equipment on the DIN rail.

Is the DDRH-45-12DR suitable for powering 12V PLCs and industrial controllers in an automation panel?

Yes. The 12V, 3.75A output is a standard supply rail for many PLCs, HMIs, and I/O modules. Its DIN rail form factor fits directly into standard control cabinets.

Can this converter run in a traction or vehicle electrification system with a high-voltage DC bus?

The 150–1500VDC input range covers the high-voltage bus voltages common in EV charging infrastructure and rail traction auxiliaries. At 45W output it is best suited for auxiliary loads such as control electronics rather than high-power drive systems.

What is the operating temperature range of the DDRH-45-12DR, and can it be used outdoors?

The unit is rated for –40°C to +80°C operation. It does not carry an IP rating for ingress protection, so outdoor deployment requires mounting inside a suitably rated enclosure to protect against moisture and dust.

Does the DDRH-45-12DR need forced-air cooling in a sealed cabinet?

The sheet does not specify forced-air cooling for the DDRH-45-12DR; it is rated –40°C to +80°C ambient with output derating per the derating curve. Ensure adequate clearance around the unit, especially when ambient temperatures approach the 80°C maximum.

How does the DDRH-45-12DR (DIN Rail) differ from the DDRH-45-12P and DDRH-45-12ST variants?

All three share the same 45W, 12V, 3.75A output and 150–1500VDC input. The DDRH-45-12DR (135×70×43.5 mm, 0.31 kg) clips onto a DIN rail. The DDRH-45-12P (89×63.5×25 mm, 0.24 kg) is a compact PCB-mount module. The DDRH-45-12ST (135×70×32 mm, 0.305 kg) uses screw terminals without the DIN rail clip.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well DDRH-45-48ST Ultra Wide Input DC-DC Converter, 45W 48V, Screw Terminal Type 938mA	45W	48V	0.938A	IP20	View
Mean Well DDRH-45-48P Ultra Wide Input DC-DC Converter, 45W 48V, PCB Type 938mA	45W	48V	0.938A	IP20	View
Mean Well DDRH-45-48DR Ultra Wide Input DC-DC Converter, 45W 48V, Din Rail Type 938mA	45W	48V	0.938A	IP20	View
Mean Well DDRH-45-24ST Ultra Wide Input DC-DC Converter, 45W 24V, Screw Terminal Type 1.87A	45W	24V	1.87A	IP20	View
Mean Well DDRH-45-24P Ultra Wide Input DC-DC Converter, 45W 24V, PCB Type 1.87A	45W	24V	1.87A	IP20	View
Mean Well DDRH-45-24DR Ultra Wide Input DC-DC Converter, 45W 24V, Din Rail Type 1.87A	45W	24V	1.87A	IP20	View
Mean Well DDRH-45-15ST Ultra Wide Input DC-DC Converter, 45W 15V, Screw Terminal Type 3A	45W	15V	3A	IP20	View
Mean Well DDRH-45-15P Ultra Wide Input DC-DC Converter, 45W 15V, PCB Type 3A	45W	15V	3A	IP20	View
Mean Well DDRH-45-15DR Ultra Wide Input DC-DC Converter, 45W 15V, Din Rail Type 3A	45W	15V	3A	IP20	View
Mean Well DDRH-45-12ST Ultra Wide Input DC-DC Converter, 45W 12V, Screw Terminal Type 3.75A	45W	12V	3.75A	IP20	View
Mean Well DDRH-45-12P Ultra Wide Input DC-DC Converter, 45W 12V, PCB Type 3.75A	45W	12V	3.75A	IP20	View

Please log in to write a review.

{ "id":9033110716715, "variants" :[{ "context":"default", "variant_id": 47944358330667, "sku":"DDRH-45-12DR", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }