Over 15 years experience of providing support of MEAN WELL Power Supplies
Mean Well ELG-240-24DA-3Y Power Supply 240W 24V - DALI 10A — 3-Wire Input (with Earth)
Request a quote for one or many products — we'll reply with pricing and availability.
Overview
ELG-240-24DA-3Y is the 24V output model of this series: rated current 10A, typical efficiency 92%. Type DA + 3Y: DALI control technology (IP67).
ELG-240 series is a 240W AC/DC LED driver featuring the dual mode constant voltage and constant current output. ELG-240 operates from 100~305VAC and offers models with different rated voltage ranging between 24V and 54V. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-240 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system
Features
- Constant Voltage + Constant Current mode output
- Metal housing design with functional Ground
- Built-in active PFC function
- No load / Standby power consumption <0.5W
- IP67 rating for indoor or outdoor installations
- Function options: DALI
- Typical lifetime>50000 hours
- 5 years warranty
Model encoding
| Type | Function |
|---|---|
| Blank | Io and Vo fixed; IP67 |
| A | Io and Vo adjustable through built-in potentiometer; IP65 |
| B | 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance); IP67 |
| AB | Io and Vo adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance); IP65 |
| DA (this model) | DALI control technology; IP67 |
Specifications
OUTPUT
- DC VOLTAGE
- 24V
- CONSTANT CURRENT REGIONNote.2
- 12 ~ 24V
- RATED CURRENT
- 10A
- RATED POWER 200VAC ~ 305VAC
- 240W
- RATED POWER 100VAC ~ 180VAC
- 180W
- RIPPLE & NOISE (max.)Note.3
- 200mVp-p
- VOLTAGE TOLERANCENote.4
- ±2.0%
- LINE REGULATION
- ±0.5%
- LOAD REGULATION
- ±0.5%
- SETUP, RISE TIMENote.6
- 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC
- HOLD UP TIME (Typ.)
- 10ms/ 230VAC 10ms/ 115VAC
INPUT
- VOLTAGE RANGENote.5
- 100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR
- PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
- TOTAL HARMONIC DISTORTION
- THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
- EFFICIENCY (Typ.)
- 92%
- AC CURRENT
- 2.2A / 115VAC 1.5A / 230VAC 1.2A/277VAC
- INRUSH CURRENT(Typ.)
- COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
- MAX. No. of PSUs on 16A CIRCUIT BREAKER
- 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
- LEAKAGE CURRENT
- <0.75mA / 277VAC
- NO LOAD / STANDBY POWER CONSUMPTIONNote.7
- No load power consumption <0.5W for Blank / A -Type Standby power consumption <0.5W for B / AB / DA-Type
PROTECTION
- OVER CURRENT
- 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 27 ~ 34V Shut down output voltage, re-power on to recover
- OVER TEMPERATURE
- Shut down output voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
- MAX. CASE TEMP.
- Tcase=+90℃
- WORKING HUMIDITY
- 20 ~ 95% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +90℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 60℃)
- VIBRATION
- 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- UL8750(type”HL”), CSA C22.2 No. 250.13-12;IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;BIS IS15885(for 24/24A/24B/24DA/36/36A/36B/42/42A/42B/48/48A/48B/54/54A/54ADA/54B only); GB/T19510.1,GB/T19510.213; IP67;KC61347-1,KC61347-2-13 approved
- DALI STANDARDS
- Compliance to IEC62386-101,102,(207 by request) for DA Type only
- WITHSTAND VOLTAGE
- I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load≧50%) ; BS EN/EN61000-3-3; GB/T 17743, GB17625.1;EAC TP TC 020; KC KN15,KN61547
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 02; KC KN15,KN61547
OTHERS
- MTBF
- 2391.4K hrs min. Telcordia SR-332 (Bellcore) ; 190.7K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 244*71*37.5mm (L*W*H)
- PACKING
- 1.22Kg; 12pcs / 15.2Kg / 0.72CUFT
Certifications & ratings
- Type
- HL
Test conditions and notes13
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
- 2. Please refer to "DRIVING METHODS OF LED MODULE".
- 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- 4. Tolerance : includes set up tolerance, line regulation and load regulation.
- 5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
- 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
- 7. No load/standby power consumption is specified for 230VAC input.
- 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- 9. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.
- 10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
- 11. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 12. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
- 13. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
Technical drawings
Typical applications
- LED street lighting
- LED architectural lighting
- LED bay lighting
- LED floodlighting
- Type “HL” for use in Class I, Division 2 hazardous (Classified) location.
Downloads
Datasheet1
Certificates4
Test reports1
FAQ
Can the ELG-240-24DA-3Y be used for DALI-controlled 24V LED lighting in a large commercial office?
Yes. The 'DA' suffix indicates DALI dimming, enabling individually addressed zone control and scheduling from a DALI bus. At 240W and 24V it supports extended LED strip runs across open-plan ceiling systems, which is typical in large commercial office fit-outs.
Is the ELG-240-24DA-3Y appropriate for outdoor 24V LED architectural lighting on a building facade?
Yes. The IP65/IP67 rating handles rain, the -40°C to +90°C case temperature range (max. ambient 60°C at rated current in constant-current mode) covers outdoor temperature extremes, and the 100–305VAC input accepts diverse mains supplies. DALI control allows time-scheduled dimming from a building automation system.
Can the ELG-240-24DA-3Y power 24V LED strips in an outdoor stadium or sports complex?
Yes. The IP65/IP67-rated enclosure handles the dust and moisture exposure typical of sports venue service areas and exterior concourses, and the 240W output supports long perimeter strip runs. DALI integration enables zone-level dimming control from a venue management system.
How many meters of 24V LED strip can the ELG-240-24DA-3Y support?
At 240W and 24V output (200–305VAC input), divide 240 by your strip's wattage per meter: a 14.4 W/m strip supports approximately 16.6 meters and a 20 W/m strip supports approximately 12 meters. On 100–180VAC the rating is 180W. Verify your strip's rated power per meter and consider about 20% headroom.
Is the ELG-240-24DA-3Y waterproof enough for a wet outdoor installation such as a landscape lighting vault?
Possibly. The ELG-240 series is rated IP65 or IP67, and only IP67 covers temporary water immersion, so confirm the IP rating of the unit before mounting it in below-grade enclosures or landscape vaults exposed to flooding.
What certifications does the ELG-240-24DA-3Y carry?
The datasheet lists UL8750 (type HL), CSA C22.2 No. 250.13-12, IEC/BS EN/EN/AS/NZS 61347-1 and 61347-2-13, EN62384, EAC TP TC 004, GB/T19510 and KC safety standards and DALI IEC62386-101/102. This covers North American, European, Eurasian, Australian/New Zealand, Chinese and Korean requirements, supporting broad international deployment.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other ELG-240 Models
6 other models| Model | Power | Voltage | Current | IP Rating | |
|---|---|---|---|---|---|
| Mean Well S-ELG-240-24-3Y Power Supply 240W 24V 10A — 3-Wire Input (with Earth) | 240W | 24V | 10A | IP67 | View |
| Mean Well ELG-240-48 Power Supply 240W 48V 5A | 240W | 48V | 5A | IP67 | View |
| Mean Well ELG-240-24 Power Supply 240W 24V 10A | 240W | 24V | 10A | IP67 | View |
| Mean Well ELG-240-24-3Y Power Supply 240W 24V 10A — 3-Wire Input (with Earth) | 240W | 24V | 10A | IP67 | View |
| Mean Well ELG-240-48A-3Y Power Supply 240W 48V - Adjustable 5A — 3-Wire Input (with Earth) | 240W | 48V | 5A | IP65 | View |
| Mean Well ELG-240-48DA-3Y Power Supply 240W 48V - DALI 5A — 3-Wire Input (with Earth) | 240W | 48V | 5A | IP67 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.









