Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well HRPG-1000N3-12 Power Supply 960W 12V, 320% peak power model 80A

built-in active PFCPF > 0.95high efficiency up to 94%current sharing up to 4000Wup to 320% peak power capacity

SKU HRPG-1000N3-12

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

HRPG-1000N3-12 is the 12V output model of this series: rated current 80A, rated power 960W, typical efficiency 91.5%.

HRPG-1000N3 series is a 1000W single output AC/DC with ultra-high peak power supply. This series operates for 90~264 VAC input voltage and offers models with different rated voltage ranging between 12 and 48 V that can satisfy the demands for all kinds of industrial equipments. Each model is cooled by the built-in fan with speed control, working for the temperature up to 70℃. Moreove, HRPG-1000N3 has various built-in functions such as auxiliary power, remote sense and remote on-off control, offering vast design flexibility for industrial application. It can provide 320% short-duration peak power for motor applications and electromechanical loads requiring much higher power during start-up.

Features

Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 94%
Withstand 300VAC surge input for 5 seconds
Up to 320% peak power capability
Protections: Short circuit / Overload / Over voltage / Over temperature
For inductive and capacitive load
Built-in cooling fan ON-OFF control
Current sharing up to 4000W (3+1)
Built-in DC OK / remote ON-OFF / remote sense functions
Standby power 5V@0.3A
No load power consumption<0.85W (Note.7)
5 years warranty

Specifications

HRPG-1000N3-12Specifications from the official datasheet (2026-04-03 edition)

OUTPUT

DC VOLTAGE: 12V
RATED CURRENT: 80A
CURRENT RANGE: 0 ~ 80A
RATED POWER: 960W
RIPPLE & NOISE (max.)^Note.2: 150mVp-p
VOLTAGE ADJ. RANGE: 11 ~ 14V
VOLTAGE TOLERANCE^Note.3: ±2.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±2.0%
SETUP, RISE TIME: 1000ms, 50ms/230VAC 2000ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.): 16ms/230VAC 16ms/115VAC at full load

INPUT

VOLTAGE RANGE: 90 ~ 264VAC(300VAC for 5 sec.) 127 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.95/230VAC PF>0.99/115VAC at full load
EFFICIENCY (Typ.): 91.5%
AC CURRENT (Typ.): 8.5A/115VAC 5A/230VAC
INRUSH CURRENT (Typ.): 25A/115VAC 40A/230VAC
LEAKAGE CURRENT: <1.2mA / 240VAC

PROTECTION

OVERLOAD^Note.4: Output power >105% rated for more than 5 seconds then shut down o/p voltage, re-power on to recover Output power > 320% rated then shut down o/p voltage, re-power on to recover for 12V Output power > 350% rated then shut down o/p voltage, re-power on to recover for 24V, 36V and 48V
OVER VOLTAGE: 14.5 ~ 16.5V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

CURRENT SHARING: Up to 4000W or (3+1) units. Please refer to the function manual.
REMOTE ON-OFF CONTROL: Power ON : short; Power OFF : open. Please refer to the function manual.
REMOTE SENSE: Compensate voltage drop on the load wiring up to 0.5V. Please refer to the function manual.
DC-OK SIGNAL: The TTL signal out, PSU turn on = 3.3 ~ 5.6V ; PSU turn off = 0 ~ 1V. Please refer to the function manual.
5V STANDBY: 5VSB : 5V@0.3A ; tolerance±5%, ripple : 50mVp-p(max.)
FAN CONTROL: Fan on/off by NTC(RT50) or 30% load min.

ENVIRONMENT

WORKING TEMP.: -40 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL62368-1, CAN/CSA C22.2 No. 62368-1 , TUV BS EN/ EN62368-1, AS/NZS62368.1, EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 (CISPR32) Class B
Radiated BS EN/EN55032 (CISPR32) Class B
Harmonic Current BS EN/EN61000-3-2 Class A
Voltage Flicker BS EN/EN61000-3-3
EMC IMMUNITY: BS EN/EN55035, BS EN/EN61000-6-2

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 3
EFT / Burst BS EN/EN61000-4-4 Level 3
Surge BS EN/EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth
Conducted BS EN/EN61000-4-6 Level 3
Magnetic Field BS EN/EN61000-4-8 Level 4
Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55032 (CISPR32)	Class B
Radiated	BS EN/EN55032 (CISPR32)	Class B
Harmonic Current	BS EN/EN61000-3-2	Class A
Voltage Flicker	BS EN/EN61000-3-3

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 3
EFT / Burst	BS EN/EN61000-4-4	Level 3
Surge	BS EN/EN61000-4-5	Level 4, 2KV/Line-Line 4KV/Line-Earth
Conducted	BS EN/EN61000-4-6	Level 3
Magnetic Field	BS EN/EN61000-4-8	Level 4
Voltage Dips and Interruptions	BS EN/EN61000-4-11	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS

MTBF: 989.2K hrs min. Telcordia SR-332 (Bellcore) ; 130.6K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 218*105*61.5mm (L*W*H)
PACKING: 1.46Kg;8pcs/12.8Kg/1.58CUFT

Test conditions and notes9

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. After the output protection, restart the device about 30 seconds after the input disconnection interval.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. No load power consumption<0.85W when RC+ & RC- (CN100 pin3,4) open.
8. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*700mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

HRPG-1000N3-12 Block Diagram — Block Diagram

HRPG-1000N3-12 Derating Curve — Derating Curve

HRPG-1000N3-12 1000W Ultra-High Peak Power Supply — 1000W Ultra-High Peak Power Supply

HRPG-1000N3-12 Function Manual — Function Manual

HRPG-1000N3-12 4.Current Sharing — 4.Current Sharing

HRPG-1000N3-12 Mechanical Specification — Mechanical Specification

Typical applications

Factory control or automation apparatus
Test and measurement instrument
Laser related machine
Aging equipment
RF application

Downloads

::specification::

FAQ

What are the main output specifications of the Mean Well HRPG-1000N3-12?

This model provides a 12V DC output with a rated current of 80A. The datasheet lists a 960W rated power, and the 12V model handles peak loads up to 320% of rated power before overload shutdown. It also includes built-in PFC and a typical efficiency of 91.5%.

What kinds of applications is the HRPG-1000N3-12 best suited for?

This power supply is aimed at industrial and high-reliability 12V systems that need substantial current capacity and strong transient handling. Its 80A output, 320% peak power capability, DC OK signal, and remote control features make it relevant for demanding B2B equipment and control platforms. It is best matched to equipment designed specifically for 12V DC input.

What makes the HRPG-1000N3-12 different from a more basic enclosed 12V power supply?

Compared with a more basic enclosed PSU, this model stands out with built-in PFC, a typical efficiency of 91.5%, and the ability to withstand a 300VAC surge input for 5 seconds. It also adds 320% peak power capability, current sharing support up to 4000W in a 3+1 setup, remote ON-OFF control, remote sense, and a built-in DC OK signal. Those features make it more suitable for higher-demand industrial use cases.

Can this model support systems that need higher total power or parallel power architecture?

Yes. The product data states current sharing up to 4000W in a 3+1 configuration, which makes it relevant for higher-power systems that use multiple supplies together. It also includes a built-in DC OK signal and remote ON-OFF control, which are useful features in monitored or managed power designs.

Is the HRPG-1000N3-12 suitable for demanding temperature conditions?

The listed operating temperature range is -40°C to 70°C, with output derating at higher ambient temperatures per the derating curve. The unit also uses a built-in cooling fan with ON-OFF control to help manage thermal performance. Buyers should still confirm that the surrounding enclosure and system conditions stay within the product's rated limits.

Is this a good choice for 12V loads with short-term peak demand?

It can be a strong fit when the equipment requires 12V DC and experiences brief peak demand, because this model is specifically described as having up to 320% peak power capability. That differentiates it from standard fixed-output supplies that are sized mainly around continuous load. The load still needs to be compatible with the unit's 12V output and 80A rated current.

What protection and support features are built into this power supply?

This model includes overload, over voltage, and over temperature protection. It also provides remote sense, a DC OK signal, remote ON-OFF control, and a 5V standby output rated at 0.3A. Those features help support monitored industrial systems where status signaling and control are important.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current
Mean Well HRPG-1000N3-48 Power Supply 960W 48V, 320% peak power model 21A	1008W	21V	21A	View
Mean Well HRPG-1000N3-36 Power Supply 960W 36V, 320% peak power model 28A	1008W	28V	28A	View
Mean Well HRPG-1000N3-24 Power Supply 960W 24V, 320% peak power model 42A	1008W	24V	42A	View

Please log in to write a review.

{ "id":8791112679723, "variants" :[{ "context":"default", "variant_id": 47182710505771, "sku":"HRPG-1000N3-12", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }