💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well LDDS-500HWB DC/DC LED Driver CC 500mA - Step-down Wire Type - 3 in 1 Dimmable

constant currentstep downhigh efficiency up to 97%IP67wire style
SKU LDDS-500HWB
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

LDDS-500HWB is the model of this series: typical efficiency 95%. Type B: 3 in 1 Dimming function.

LDDS-H series is a 45W DC/DC LED driver featuring constant current output. LDDS-H operates from 12~56VDC and offers models with different rated current ranging between 250mA and 1000mA. With the high efficiency up to 96%, The 94V-0 flame retardant plastic case with fully-potted to enhance the heat dissipation allows this series to fit for class Ⅲ commercial track light or DC bus lighting application.

Features

  • DC/DC step-down converter
  • Constant current output: 250mA to 1000mA
  • Wide input voltage: 12 ~ 56VDC(48V typ.)
  • Wide output LED forward string voltage: 2 ~ 45VDC
  • High efficiency up to 96%
  • Built-in EMI filter, comply with BS EN/EN55015
  • 3 in 1 dimming and remote ON/OFF control.
  • Protections: Short circuit / Over temperature / Over current
  • Cooling by free air convection
  • Compact size and Fully encapsulated
  • Suitable for driving illumination LED
  • 5 years warranty

Specifications

LDDS-500HWBSpecifications from the official datasheet (2026-08-20 edition)

OUTPUT

CURRENT RANGE
500mA
VOLTAGE RANGENote.4
2 ~ 45VDC
CURRENT ACCURACY (Typ.)
±5% at 48VDC input (or 24VDC)
RIPPLE & NOISE(max.)Note.2
350mVp-p
SWITCHING FREQENCY
40KHz ~ 1000KHz
EXTERNAL CAPACITANCE LOAD (max.)
2.2uF

INPUT

VOLTAGE RANGE
12 ~ 56VDC
EFFICIENCY (Typ.)Note.3
95%
DC CURRENT Full loadNote.3
400mA
DC CURRENT No load
6mA
FILTER
Capacitor

REMOTE ON/OFF & 3 IN 1 DIMMING

PWM FREQUENCY
100 ~ 1KHz (4mA at PWM dimming off)
3 IN 1 DIMMING
0 ~ 10V / PWM / Resistor Dimming

PROTECTION

SHORT CIRCUIT
Regulated at rated output current Protection type: Can be continued, recovers automatically after fault condition is removed
OVER TEMPERATURE
Tj 150℃ typically(IC1) detect on main control IC Protection type : Shut down, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.
-40 ~ + 55℃(Refer to derating curve) @ full load
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-55 ~ +125℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
OPERATING CASE TEMP. (max.)
90℃

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
EMC EMISSION
Compliance to BS EN/EN55015, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,6,8, light industry level, criteria A, EAC TP TC 020

OTHERS

MTBF
650Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
47*12*7mm or 1.85"*0.47"*0.28" inch (L*W*H)
PACKING
LDDS-HW: 9.5g, 36pcs/box, 0.43kg/box. 12 box per carton/6kg LDDS-HWB: 9.4g, 36pcs/box, 0.43kg/box. 12 box per carton/6kg
POTTING MATERIAL
Expoxy(UL94-V0)

MODEL ENCODING

Blank
Remote ON/OFF control
B (this model)
3 in 1 Dimming function
Test conditions and notes5
  1. 1.All parameters are specified at normal input(48VDC), rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf capacitor.
  3. 3.Test condition: 48VDC input, 36VDC output without Dimming.
  4. 4.Output voltage will always step down 4 volts from input DC voltage.
  5. 5.The output of LDDS-H should not be connected to the input of the same unit or output from other sources.

Technical drawings

LDDS-500HWB Derating Curve
Derating Curve
LDDS-500HWB Standard Application(LDDS-HW series)(Remote
Standard Application(LDDS-HW series)(Remote
LDDS-500HWB 3 in 1 Dimming Control(LDDS-HWB
3 in 1 Dimming Control(LDDS-HWB
LDDS-500HWB Efficiency VS Output Voltage(Number
Efficiency VS Output Voltage(Number
LDDS-500HWB Pin Configuration
Pin Configuration

Typical applications

  • DC battery source lighting
  • Portable lighting
  • Commercial lighting
  • DC 48V Track lighting
  • DC 24V landscape lighting
  • For STUCCHI track adapters
  • For class Ⅲ application(SELV)

Downloads

FAQ

Can I use the LDDS-500HWB for a dimmable 500mA LED downlight?

Yes, if the downlight is specified for 500mA constant current operation. This model is a constant current step-down driver with a 2-45V range, and the HWB version adds 3 in 1 dimming (0-10V, PWM or resistor).

Is the LDDS-500HWB a good match for dimmable LED signage modules?

It can be, when the signage modules require 500mA constant current rather than a constant voltage feed. The driver regulates current across 2-45V, so the module voltage needs to fall within that range and the application needs to be designed around constant current operation.

Can this driver be used with a compact small LED array that needs dimming?

Yes, for small LED arrays that call for 500mA constant current and operate within the 2-45V output range. Its compact 47 x 12 x 7 mm package and 3 in 1 dimming are useful when space and dimming control both matter.

What should I check before pairing the LDDS-500HWB with an LED array?

Verify that the array requires 500mA constant current and that the total LED forward voltage stays within the 2-45V output range. The number of LEDs depends on each LED forward voltage, so the correct fit is based on current and total voltage, not a fixed count.

Is the LDDS-500HWB appropriate for outdoor or temperature-sensitive applications?

This driver operates from -40°C to +55°C at full load, with derating above that, and 20% to 90% RH non-condensing. The datasheet gives no IP rating, so it is not specified for exposed outdoor use; the full fixture must keep it within these conditions.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8420903846187, "variants" :[{ "context":"default", "variant_id": 45622041280811, "sku":"LDDS-500HWB", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well LDDS-500HWB DC/DC LED Driver CC 500mA - Step-down Wire Type - 3 in 1 Dimmable
Mean Well

Mean Well LDDS-500HWB DC/DC LED Driver CC 500mA - Step-down Wire Type - 3 in 1 Dimmable

LDDS-500HWB is the model of this series: typical efficiency 95%. Type B: 3 in 1 Dimming function.

LDDS-H series is a 45W DC/DC LED driver featuring constant current output. LDDS-H operates from 12~56VDC and offers models with different rated current ranging between 250mA and 1000mA. With the high efficiency up to 96%, The 94V-0 flame retardant plastic case with fully-potted to enhance the heat dissipation allows this series to fit for class Ⅲ commercial track light or DC bus lighting application.

Features

  • DC/DC step-down converter
  • Constant current output: 250mA to 1000mA
  • Wide input voltage: 12 ~ 56VDC(48V typ.)
  • Wide output LED forward string voltage: 2 ~ 45VDC
  • High efficiency up to 96%
  • Built-in EMI filter, comply with BS EN/EN55015
  • 3 in 1 dimming and remote ON/OFF control.
  • Protections: Short circuit / Over temperature / Over current
  • Cooling by free air convection
  • Compact size and Fully encapsulated
  • Suitable for driving illumination LED
  • 5 years warranty

Typical applications

  • DC battery source lighting
  • Portable lighting
  • Commercial lighting
  • DC 48V Track lighting
  • DC 24V landscape lighting
  • For STUCCHI track adapters
  • For class Ⅲ application(SELV)
View product