💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 4

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well LPV-60-48 LED Driver — 60W 48V 1.25A IP67 Waterproof

Constant VoltageCB/CE/EAC/UL Certified90-264VAC Universal Input2-Year Warranty
SKU LPV-60-48
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →

Select model — 3 in this family

LPV-60-48
In stock
|

Overview

LPV-60-48 is the 48V output model of this series: rated current 1.25A, rated power 60W, typical efficiency 86%.

Features

  • Constant voltage design
  • Universal AC input / Full range
  • Withstand 300VAC surge input for 5 seconds
  • Protections: Short circuit / Over load / Over voltage
  • Cooling by free air convection
  • Fully encapsulated with IP67 level (Note.7)
  • Fully isolated plastic case
  • Class Ⅱ power unit, no FG
  • Class 2 power unit
  • Pass LPS
  • Display devices for decorative & advertising accessories (Note.11)
  • General-purpose electronics operated in dusty or damp environments
  • 100% full load burn-in test
  • Low cost, high reliability
  • 2 years warranty

Specifications

LPV-60-48Specifications from the official datasheet (2026-09-07 edition)

OUTPUT

DC VOLTAGE
48V
RATED CURRENT
1.25A
CURRENT RANGE
0 ~ 1.25A
RATED POWER
60W
RIPPLE & NOISE (max.)Note.2
150mVp-p
VOLTAGE TOLERANCENote.3
±5.0%
LINE REGULATION
±1.0%
LOAD REGULATION
±2.0%
SETUP, RISE TIMENote.6
500ms, 20ms / 230VAC 500ms, 20ms / 115VAC at full load(for 5~36V) ; 500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load(for 48V)
HOLD UP TIME (Typ.)
50ms/230VAC 16ms/115VAC at full load

INPUT

VOLTAGE RANGENote.4
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
86%
AC CURRENT (Typ.)
1.2A/115VAC 1A/230VAC
INRUSH CURRENT(Typ.)
COLD START 60A(twidth=525μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
0.25mA / 240VAC

PROTECTION

OVER LOAD
110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
55.2 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.
-30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
UL879(except for LPV-60-5), UL1310(except for LPV-60-5), CSA C22.2 No. 207-M89(except for LPV-60-5, LPV-60-48), CAN/CSA C22.2 No. 223-M91(except for LPV-60-5,LPV-60-48), BIS IS15885(Note 12), EAC TP TC 004, IP67, IEC62368-1 , BS EN/EN62368-1 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
ISOLATION RESISTANCE
I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A, BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020

OTHERS

MTBF
5188.4K hrs min. Telcordia SR-332 (Bellcore) ; 732.1Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
162.5*42.5*32mm (L*W*H)
PACKING
0.4Kg; 32pcs/13.8Kg/0.66CUFT
Test conditions and notes12
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
  5. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  6. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
  7. 7. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute.
  8. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  9. 9. Products sourced from the Americas regions may not have the TUV/BIS/CCC logo. Please contact your MEAN WELL sales for more information.
  10. 10. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
  11. 11. This product is not intended for LED lighting luminaire applications in the EU and China.(In the EU and China the LPF/NPF/XLG/XLC/XLN series are recommended.)
  12. 12. Products sourced from the China regions may not have the BIS logo, please contact your MEAN WELL sales for more information.

Technical drawings

LPV-60-48 Recommend Mounting Direction
Recommend Mounting Direction
LPV-60-48 Block Diagram
Block Diagram
LPV-60-48 Derating Curve
Derating Curve

Downloads

FAQ

What types of LED lighting can the LPV-60-48 power?

The LPV-60-48 is suited for 48V LED strip systems, architectural lighting, and commercial signage that operates at 48V. At 60W maximum output, it can drive a 48V LED load up to 60W — check your strip's rated power per meter to calculate the maximum run length. Its IP67 rating makes it a practical choice for outdoor signage or covered exterior installations.

How much LED strip can I run from the LPV-60-48?

The LPV-60-48 delivers up to 60W at 48V. To find the maximum strip length, divide 60W by your strip's rated wattage per meter — for example, a 10W/m strip would allow up to 6 meters. Always check your strip's rated power per meter, as actual limits depend on that specification.

Is the LPV-60-48 suitable for outdoor or wet environments?

Yes, within limits. The LPV-60-48 carries an IP67 rating, meaning it is dust-tight and protected against temporary immersion in water (the sheet advises avoiding immersion over 30 minutes). It operates across -30°C to +70°C with derating at higher temperatures and is rated for outdoor use without direct sunlight exposure, making it appropriate for outdoor LED signage and lighting in damp locations shielded from direct sun.

What input voltage range does the LPV-60-48 accept?

The LPV-60-48 accepts a universal input range of 90–264VAC, so it works with standard electrical supplies in North America, Europe, and most other regions without any manual switching; derating may be needed at low input voltage. This makes it convenient for projects that may be deployed across different countries or buildings with variable mains voltage.

What certifications does the LPV-60-48 hold?

The LPV-60-48 is approved to UL879 and UL1310, IEC62368-1 and BS EN/EN62368-1, EAC TP TC 004 and BIS IS15885; the CSA approvals listed for other LPV-60 models exclude the 48V version. UL covers the United States, EAC the Eurasian Economic Union, and IEC/EN62368-1 is the international and European safety standard. It also carries a 2-year warranty from Mean Well.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8423862665515, "variants" :[{ "context":"default", "variant_id": 45636215898411, "sku":"LPV-60-48", "inventory_qty" : 7, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well LPV-60-48 LED Driver — 60W 48V 1.25A IP67 Waterproof
Mean Well

Mean Well LPV-60-48 LED Driver — 60W 48V 1.25A IP67 Waterproof

Log in to see price

LPV-60-48 is the 48V output model of this series: rated current 1.25A, rated power 60W, typical efficiency 86%.

Features

  • Constant voltage design
  • Universal AC input / Full range
  • Withstand 300VAC surge input for 5 seconds
  • Protections: Short circuit / Over load / Over voltage
  • Cooling by free air convection
  • Fully encapsulated with IP67 level (Note.7)
  • Fully isolated plastic case
  • Class Ⅱ power unit, no FG
  • Class 2 power unit
  • Pass LPS
  • Display devices for decorative & advertising accessories (Note.11)
  • General-purpose electronics operated in dusty or damp environments
  • 100% full load burn-in test
  • Low cost, high reliability
  • 2 years warranty

Model

  • 60W 48V
  • 100W 48V
  • 150W 48V
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top