Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well NID65-12 DC-DC Converter - 58.8W - 20~53V in 12V out 4.9A

SKU NID65-12

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

NID65-12 is the 12V output model of this series: rated power 58.8W, typical efficiency 96%.

Features

Economical open frame design
Wide input range
High efficiency up to 97%
Remote ON / OFF control
Compact size 2.0"×1.024"× 0.433"(SIP package)
Protections: Short circuit / Overload / Over voltage
-30~+85℃ wide working temperature
Cooling by free air convection
Comply to BS EN/EN55032 ClassA without additional components
Trimming output (optional)
3 years warranty

Specifications

NID65-12Specifications from the official datasheet (2024-10-30 edition)

OUTPUT

DC VOLTAGE: 12V
CURRENT RANGE: 0 ~ 4.9A
RATED POWER: 58.8W
RIPPLE & NOISE (max.)^Note.2: 120mVp-p
LINE REGULATION^Note.3: ±0.5%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE TOLERANCE: ±2.0%
SWITCHING FREQUENCY (Typ.): 200KHz
EXTERNAL CAPACITANCE LOAD (max.): 68uf/25V low ESR

INPUT

VOLTAGE RANGE: 20 ~ 53VDC
NORMAL VOLTAGE: 24VDC (or 48VDC)
EFFICIENCY (Typ.) 24Vin: 96%
EFFICIENCY (Typ.) 48Vin: 95%
DC CURRENT Full load: 2700mA/24VDC
DC CURRENT No load: 30mA

PROTECTION

PROTECTION: Fuse recommended (5A)
OVERLOAD (Typ.): 120 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 15.6~ 18V Protection type : Shut off o/p voltage, clamp by TVS diode
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

FUNCTION

REMOTE CONTROL: Power on : 1.2VDC < R.C ~ com < 12VDC or open circuit ; power off : R.C ~ com < 0.4VDC or short circuit (PIN5,6 & PIN11)

ENVIRONMENT

SAFETY STANDARDS: EAC TP TC 004 approved
WORKING TEMP.: -30 ~ +85℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 85% RH non-condensing
STORAGE TEMP.: -30 ~ +105℃
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 55℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARD: BS EN/EN62368-1(LVD)
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 Class A without external components,Class B with external components
Radiated BS EN/EN55032 Class A without external components,Class B with external components
EMC IMMUNITY: BS EN/EN55035

Parameter Standard Test Level

Radiated BS EN/EN61000-4-3 Level 2, 3V/m; criteria A
EFT / Burst BS EN/EN61000-4-4 Level 2, 1KV; criteria A
Surge BS EN/EN61000-4-5 Level 2, 1KV/Line-Line,criteria A
Conducted BS EN/EN61000-4-6 Level 2, 3V; criteria A

Parameter	Standard	Test Level
Conducted	BS EN/EN55032	Class A without external components,Class B with external components
Radiated	BS EN/EN55032	Class A without external components,Class B with external components

Parameter	Standard	Test Level
Radiated	BS EN/EN61000-4-3	Level 2, 3V/m; criteria A
EFT / Burst	BS EN/EN61000-4-4	Level 2, 1KV; criteria A
Surge	BS EN/EN61000-4-5	Level 2, 1KV/Line-Line,criteria A
Conducted	BS EN/EN61000-4-6	Level 2, 3V; criteria A

OTHERS

MTBF: 16602.6K hrs min. Telcordia SR-332 (Bellcore) ; 890.7K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 50.8*26*11mm or 2.0"*1.024"*0.433" inch (L*W*H)
WEIGHT: 19g;280psc/6.32Kg/0.94CUFT

Test conditions and notes4

1.All parameters are specified at normal input, rated load, 25℃ 70% RH Ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.

Technical drawings

NID65-12 Derating Curve — Derating Curve

NID65-12 Mechanical Specification — Mechanical Specification

NID65-12 Pin Configuration — Pin Configuration

NID65-12 EMC Suggestion Circuit — EMC Suggestion Circuit

Downloads

Certificates3

Mean Well NID-35-65-100-EMC Certificate PDF Download

Mean Well NID-35-65-100-CE-dec Certificate PDF Download

Mean Well NID-35-65-100-UK-dec Certificate PDF Download

Test reports1

Mean Well NID65-12 Test Report PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the NID65-12 for a 12V industrial control device?

Yes, if the equipment requires a constant-voltage 12V output and draws no more than 4.9A or 58.8W. This model accepts 20-53VDC input and is intended for regulated 12V loads.

Is the NID65-12 suitable for 12V embedded or edge-computing hardware in a wider-input system?

It can be used where the source is within 20-53VDC and the load needs a stable 12V constant-voltage output. The available output is capped at 4.9A and 58.8W, so the total draw of the embedded hardware must stay within that limit.

Can this converter power 12V automation accessories or low-power actuators?

It is appropriate for 12V automation loads that need constant voltage and stay within 4.9A output current. The total output capacity is 58.8W, so it fits lighter-duty 12V accessories rather than higher-power 12V loads.

Is the NID65-12 appropriate for harsh temperature environments?

Its operating temperature range is -30°C to +85°C, which supports use across a wide temperature span. No IP rating is listed in the provided specs, so suitability for exposed outdoor or washdown environments is not established here.

How does the NID65-12 compare with the other NID65 models?

The NID65-12 provides 12V at 4.9A for 58.8W with a 20-53VDC input range. In the same series, the NID65-15 is 15V, 4.3A, 64.5W; the NID65-24 is 24V, 2.7A, 64.8W; and the NID65-5 is 5V, 6.5A, 32.5W.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well NID65-5 DC-DC Converter - 32.5W - 10.5~53V in 5V out 6.5A	32.5W	5V	6.5A	IP20	View
Mean Well NID65-24 DC-DC Converter - 64.8W - 30~53V in 24V out 2.7A	64.8W	24V	2.7A	IP20	View
Mean Well NID65-15 DC-DC Converter - 64.5W - 20~53V in 15V out 4.3A	64.5W	15V	4.3A	IP20	View

Please log in to write a review.

{ "id":8442624639275, "variants" :[{ "context":"default", "variant_id": 45711675425067, "sku":"NID65-12", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well NID65-12 DC-DC Converter - 58.8W - 20~53V in 12V out 4.9A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

FUNCTION

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates3

Test reports1

Catalogues2

FAQ

Payment & Security

Other NID65 Models

Write a review

Your cart

Mean Well NID65-12 DC-DC Converter - 58.8W - 20~53V in 12V out 4.9A

Features

Company Information

Services and Support

Choose options