💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well PM-05-15 Power Supply 5W 15V 330mA

SKU PM-05-15
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
End of Life, Succeeded by MPM-05-15
Available to order
|

Overview

PM-05-15 is the 15V output model of this series: rated current 0.33A, rated power 4.95W, typical efficiency 74%.

Features

  • Universal AC input / Full range
  • Protections: Short circuit / Overload / Over voltage
  • Ultra-miniature size, light weight
  • Cooling by free air convection
  • Isolation classⅡ
  • Medical safety approved (2 x MOPP between primary to secondary)
  • No load power consumption<0.5W
  • 100% full load burn-in test
  • Fixed switching frequency at 67KHz
  • High reliability
  • Suitable for BF application with appropriate system consideration
  • 3 years warranty

Specifications

PM-05-15Specifications from the official datasheet (2022-09-20 edition)

OUTPUT

DC VOLTAGE
15V
RATED CURRENT
0.33A
CURRENT RANGE
0 ~ 0.33A
RATED POWER
4.95W
RIPPLE & NOISE (max.)Note.2
150mVp-p
VOLTAGE TOLERANCENote.3
±2.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±1.0%
SETUP, RISE TIME
1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load
HOLD UP TIME (Typ.)
100ms/230VAC 24ms/115VAC at full load

INPUT

VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 440Hz
EFFICIENCY (Typ.)
74%
AC CURRENT (Typ.)
0.12A/115VAC 0.08A/230VAC
INRUSH CURRENT (Typ.)
COLD START 25A/115VAC 45A/230VAC
LEAKAGE CURRENTNote.5
Touch current < 80μ A/264VAC

PROTECTION

OVERLOAD
Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
17.25 ~ 20.25V Protection type : Shut off o/p voltage, clamping by zener diode

ENVIRONMENT

WORKING TEMP.
-20 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1, EAC TP TC 004 approved
ISOLATION LEVEL
Primary-Secondary: 2xMOPP
WITHSTAND VOLTAGE
I/P-O/P:4KVAC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to EN55011(CISPR11),EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55035, EN60601-1-2, EN61204-3, medical level, EAC TP TC 020

OTHERS

MTBF
1513.4Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
62.85*50*19.7mm (L*W*H)
PACKING
0.079Kg; 120pcs/10.5Kg/0.94CUFT
Test conditions and notes6
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
  5. 5. Touch current was measured from primary input to DC output.
  6. 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

PM-05-15 Block Diagram
Block Diagram
PM-05-15 Derating Curve
Derating Curve

Downloads

FAQ

Can I use the PM-05-15 for a small 15V control board or instrumentation circuit?

Yes, if the device requires constant 15V DC and the load stays within 0.33A and 4.95W. That suits lighter-duty industrial or embedded electronics rather than larger 15V loads.

Is the PM-05-15 a fit for 15V sensors, transmitters, or signal-conditioning hardware?

It can work for low-power 15V automation and instrumentation devices that need constant voltage output. The electrical limit is 15V at up to 0.33A, with total output rated at 4.95W.

Can this model power a compact embedded analog or interface board that runs on 15V?

Yes, it is appropriate for embedded or interface electronics built for a 15V DC input, provided the full load remains under 0.33A. Its 4.95W capacity makes it a better match for compact boards than for heavier 15V equipment.

Would the PM-05-15 work for low-power 15V automation accessories inside a control cabinet?

It can be used where the accessory needs a stable 15V constant-voltage supply and modest output current. The deciding factors are the 15V output, 0.33A current limit, and 4.95W power rating.

How does the PM-05-15 compare with the other PM series options shown here?

In the PM-05 5W series, the related models are PM-05-12 at 5.04W, 12V, 0.42A; PM-05-24 at 5.52W, 24V, 0.23A; PM-05-3.3 at 4.125W, 3.3V, 1.25A; and PM-05-5 at 5W, 5V, 1A. All share the same 85-264VAC input, so the main difference is the output voltage and the current available at that voltage.

Can the PM-05-15 be used outdoors or in harsh exposed environments?

The operating temperature range is -20°C to +70°C, which supports a wide temperature span in equipment use. However, no IP rating is provided in the listed specs, so it should be considered for protected indoor enclosures rather than directly exposed outdoor conditions.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8430968865067, "variants" :[{ "context":"default", "variant_id": 45664431735083, "sku":"PM-05-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well

Mean Well PM-05-15 Power Supply 5W 15V 330mA

Log in to see price

PM-05-15 is the 15V output model of this series: rated current 0.33A, rated power 4.95W, typical efficiency 74%.

Features

  • Universal AC input / Full range
  • Protections: Short circuit / Overload / Over voltage
  • Ultra-miniature size, light weight
  • Cooling by free air convection
  • Isolation classⅡ
  • Medical safety approved (2 x MOPP between primary to secondary)
  • No load power consumption<0.5W
  • 100% full load burn-in test
  • Fixed switching frequency at 67KHz
  • High reliability
  • Suitable for BF application with appropriate system consideration
  • 3 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top