Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDD02N-15N SIP Package DC-DC Converter- 2W - ±15V Out 67mA

Input 21.6~26.4VSIP7 package with international standard pinoutmedical gradelow cost

SKU MDD02N-15N

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

MDD02N-15N is the ±15V output model of this series: rated power 2W, typical efficiency 84%.

MDS02-N and MDD02-N series are 2W isolated and unregulated module type medical grade DC-DC converter with SIP7 package. It features international standard pins, a high efficiency up to 86%, wide working temperature range -40~+95℃, 6KVDC I/P-O/P high isolation voltage, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V /±12V/±15V for dual outputs, which are suitable for medical systems, ultra low leakage current or industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP7 package with international standard pinout
Operating temperature range -40 ~ +95℃
Comply with IEC/UL62368-1 and LVD IEC60601-1
Medical safety approved (1xMOPP/2xMOOP) according to IEC60601-1
Low patient leakage current <2μA
Protections: Short circuit (Continuous)
6KVDC hight I/O isolation (Reinforced insulation)
Low cost
3 years warranty

Specifications

MDD02N-15NSpecifications from the official datasheet (2024-08-12 edition)

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE): Normal 24V (21.6 ~ 26.4V)
INPUT CURRENT NO LOAD: 10mA
INPUT CURRENT FULL LOAD: 100mA
OUTPUT VOLTAGE: ±15V
OUTPUT CURRENT: ±7 ~ 67mA
EFFICIENCY (TYP.): 84%
CAPACITOR LOAD (MAX.)^{* For each output}: *150μF

INPUT

VOLTAGE RANGE: 21.6 ~ 26.4Vdc
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 500mA Slow-Blow Type for all models

OUTPUT

VOLTAGE ACCURACY: ±5.0%
RATED POWER: 2W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: 1.2% for 1% input variation
LOAD REGULATION^Note.4: ±15% for 3.3Vo, 5Vo ; ±10% for others
SWITCHING FREQUENCY (Typ.): 20KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +95℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.02% / ℃ (0 ~ 90℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.6)

SAFETY STANDARDS: IEC62368-1 / UL62368-1, LVD IEC60601-1, EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:6KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION LEVEL: Primary-secondary: 1xMOPP / 2xMOOP when system input voltage is with 250VAC
ISOLATION CAPACITANCE (Typ.): 25pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032, BS EN/EN55011 Class A/B with external components
Radiated BS EN/EN55032, BS EN/EN55011 Class A/B with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV / 5KHz
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line to Ground
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032, BS EN/EN55011	Class A/B with external components
Radiated	BS EN/EN55032, BS EN/EN55011	Class A/B with external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV / 5KHz
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line to Ground
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m

OTHERS

MTBF: 12900Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.7*7.1*11.5mm (0.775*0.279*0.452 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.8g ; 24pcs/per tube, 2160pcs/90 tube/per carton

Test conditions and notes6

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Patient leakage current(2μA max.) and reinforced isolation is based on a 250VAC, 50/60Hz system input voltage.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDD02N-15N Mechanical Specification — Mechanical Specification

MDD02N-15N EMC Suggestion — EMC Suggestion

Typical applications

Downloads

::specification::

FAQ

What is the Mean Well MDD02N-15N designed for?

The MDD02N-15N is a 2W SIP-package DC-DC converter intended for compact power conversion in electronic equipment. This model is suited to applications that need an isolated DC-DC module with a ±15V output option and reinforced 6KVDC input-to-output isolation.

What are the key electrical specs of the MDD02N-15N?

This model is rated for 2W output power and provides a ±15V output configuration. The product data also lists a rated current of 10 mA, along with continuous short-circuit protection and overload shutdown with automatic recovery when rated power reaches 102% or more.

Is the MDD02N-15N suitable for medical or safety-sensitive equipment?

Yes. The MDD02N-15N is described as medical safety approved to IEC60601-1 with 1xMOPP/2xMOOP, and it has low patient leakage current below 2 microamps. It also carries CB, UL, EAC, CE, and UKCA safety certifications covering 62368-1 and 60601-1.

What operating temperature range can this DC-DC converter handle?

The MDD02N-15N is specified for operation from -40°C to +95°C. That wide range makes it a practical choice for equipment that may face both low-temperature starts and elevated internal enclosure temperatures.

How compact is the Mean Well MDD02N-15N?

This converter uses a SIP7 package with dimensions of 19.7 x 7.1 x 11.5 mm. Its listed weight is 2.8 g, making it a compact option where board space and overall assembly size matter.

What distinguishes the MDD02N-15N from more basic DC-DC converter modules?

Compared with basic low-cost converter modules, the MDD02N-15N stands out for its reinforced 6KVDC isolation, medical safety approvals, and very low patient leakage current. It also combines these features in a compact SIP7 form factor with a 3-year warranty.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDD02N-12N SIP Package DC-DC Converter- 2W - ±12V Out 83mA	2W	12V	0 Milliampere	IP20	View
Mean Well MDD02N-05N SIP Package DC-DC Converter- 2W - ±5V out 200mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDD02M-15N SIP Package DC-DC Converter- 2W - ±15V Out 67mA	2W	15V	0.0667A	IP20	View
Mean Well MDD02M-12N SIP Package DC-DC Converter- 2W - ±12V Out 83mA	2W	12V	0.0833A	IP20	View
Mean Well MDD02M-05N SIP Package DC-DC Converter- 2W - ±5V out 200mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDD02L-15N SIP Package DC-DC Converter- 2W - ±15V Out 67mA	2W	15V	0.0667A	IP20	View
Mean Well MDD02L-12N SIP Package DC-DC Converter- 2W - ±12V Out 83mA	2W	12V	0.0833A	IP20	View
Mean Well MDD02L-05N SIP Package DC-DC Converter- 2W - ±5V out 200mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDD02N-15 DC-DC Converter - 2W - 21.6~26.4V in ±15V out 67mA	2W	15V	0.067A	IP20	View
Mean Well MDD02N-12 DC-DC Converter - 2W - 21.6~26.4V in ±12V out 83mA	2W	12V	0.083A	IP20	View
Mean Well MDD02N-09 DC-DC Converter - 2W - 21.6~26.4V in ±9V out 111mA	2W	9V	111 Milliampere	IP20	View
Mean Well MDD02N-05 DC-DC Converter - 2W - 21.6~26.4V in ±5V out 200mA	2W	5V	200 Milliampere	IP20	View
Mean Well MDD02M-15 DC-DC Converter - 2W - 10.8~13.2V in ±15V out 67mA	2W	15V	0.067A	IP20	View
Mean Well MDD02M-12 DC-DC Converter - 2W - 10.8~13.2V in ±12V out 83mA	2W	12V	0.083A	IP20	View
Mean Well MDD02M-09 DC-DC Converter - 2W - 10.8~13.2V in ±9V out 111mA	2W	9V	111 Milliampere	IP20	View
Mean Well MDD02M-05 DC-DC Converter - 2W - 10.8~13.2V in ±5V out 200mA	2W	5V	200 Milliampere	IP20	View
Mean Well MDD02L-15 DC-DC Converter - 2W - 4.5~5.5V in ±15V out 67mA	2W	15V	0.067A	IP20	View
Mean Well MDD02L-12 DC-DC Converter - 2W - 4.5~5.5V in ±12V out 83mA	2W	12V	0.083A	IP20	View
Mean Well MDD02L-09 DC-DC Converter - 2W - 4.5~5.5V in ±9V out 111mA	2W	9V	111 Milliampere	IP20	View
Mean Well MDD02L-05 DC-DC Converter - 2W - 4.5~5.5V in ±5V out 200mA	2W	5V	200 Milliampere	IP20	View

Please log in to write a review.

{ "id":9596808692011, "variants" :[{ "context":"default", "variant_id": 49368164991275, "sku":"MDD02N-15N", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }