Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDS01N-12N SIP Package DC-DC Converter- 1W - 12V Out 83mA

Input 21.6~26.4VSIP7 package with international standard pinoutmedical gradelow cost

SKU MDS01N-12N

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

MDS01N-12N is the 12V output model of this series: rated power 1W, typical efficiency 82%.

MDS01-N and MDD01-N series are 1W isolated and unregulated module type medical grade DC-DC converter with SIP7 package. It features international standard pins, a high efficiency up to 84%, wide working temperature range -40~+95℃, 6KVDC I/P-O/P hi-ght isolation voltage, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for medical systems, ultra low leakage current or industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP7 package with international standard pinout
Operating temperature range -40 ~ +95℃
Comply with IEC/UL62368-1 and LVD IEC60601-1
Medical safety approved (1xMOPP/2xMOOP) according to IEC60601-1
Low patient leakage current <2μA
Protections: Short circuit (Continuous)
6KVDC hi-ght I/O isolation (Reinforced insulation)
Low cost
3 years warranty

Specifications

MDS01N-12NSpecifications from the official datasheet (2024-08-12 edition)

INPUT

INPUT VOLTAGE (RANGE): Normal 24V (21.6 ~ 26.4V)
VOLTAGE RANGE: 21.6 ~ 26.4Vdc
INPUT CURRENT (NO LOAD): 8mA
INPUT CURRENT (FULL LOAD): 52mA
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 500mA Slow-Blow Type for all models

OUTPUT

OUTPUT VOLTAGE: 12V
OUTPUT CURRENT: 9 ~ 84mA
EFFICIENCY^(Typ.): 82%
CAPACITOR LOAD^(Max.): 220μF
VOLTAGE ACCURACY: ±5.0%
RATED POWER: 1W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: 1.2% for 1% input variation
LOAD REGULATION^Note.4: ±15% for 3.3Vo, 5Vo ; ±10% for others
SWITCHING FREQUENCY^(Typ.): 30KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +95℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.02% / ℃ (0 ~ 90℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: IEC62368-1 / UL62368-1, LVD IEC60601-1, EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:6KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION LEVEL: Primary-secondary: 1xMOPP / 2xMOOP when system input voltage is with 250VAC
ISOLATION CAPACITANCE^(Typ.): 10pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032, BS EN/EN55011 Class A/B with external components
Radiated BS EN/EN55032, BS EN/EN55011 Class A/B with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV / 5KHz
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line to Ground
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032, BS EN/EN55011	Class A/B with external components
Radiated	BS EN/EN55032, BS EN/EN55011	Class A/B with external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV / 5KHz
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line to Ground
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m

OTHERS

MTBF: 15000Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.7*7.1*11.5mm (0.775*0.279*0.452 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.8g ; 24pcs/per tube, 2160pcs/90 tube/per carton

Test conditions and notes6

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Patient leakage current(2μA max.) and reinforced isolation is based on a 250VAC, 50/60Hz system input voltage.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDS01N-12N Mechanical Specification — Mechanical Specification

MDS01N-12N EMC Suggestion — EMC Suggestion

Typical applications

Downloads

Datasheet1

MDS01N-12N datasheetMDS01_N_spec.pdf · 2024-08-12 edition PDF Download

FAQ

What is the Mean Well MDS01N-12N designed for?

The MDS01N-12N is a 1W SIP-package DC-DC converter with a 12V output. It is intended for compact embedded and industrial electronics that need isolated DC-DC power conversion in a small footprint.

What output does the MDS01N-12N provide?

This model provides a single 12V DC output and is rated at 1W. It belongs to the Mean Well MDS01N series, which is built in a SIP7 package format.

Is the MDS01N-12N suitable for medical or safety-sensitive equipment?

Yes. The product description states compliance with IEC/UL 62368-1 and IEC60601-1, and it is listed as medically safety approved with 1xMOPP/2xMOOP. It also specifies low patient leakage current below 2uA.

How much isolation does the MDS01N-12N offer?

The MDS01N-12N is specified with 6KVDC input-to-output isolation. The description identifies this as reinforced insulation, which can be important in applications requiring strong isolation performance.

Can the MDS01N-12N be used in harsh temperature environments?

Yes. This model is rated for operation from -40°C to +95°C, which makes it suitable for demanding ambient conditions. Buyers should still confirm the rest of their system is rated for the same range.

What protection features are included on the MDS01N-12N?

The product includes continuous short-circuit protection. It also has overload protection that shuts down the output when rated power reaches 102% or more and then auto-recovers.

What are the physical size and warranty for the MDS01N-12N?

The listed dimensions are 19.7 x 7.1 x 11.5 mm, which supports use in space-constrained designs. Mean Well also lists a 3-year warranty for this model.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDS01N-15N SIP Package DC-DC Converter- 1W - 15V Out 67mA	1W	15V	0.0667A	IP20	View
Mean Well MDS01N-05N SIP Package DC-DC Converter- 1W - 5V out 200mA	1W	5V	0 Milliampere	IP20	View
Mean Well MDS01N-03N SIP Package DC-DC Converter- 1W - 3.3V out 303mA	1W	3.3V	0 Milliampere	IP20	View
Mean Well MDS01M-15N SIP Package DC-DC Converter- 1W - 15V Out 67mA	1W	15V	0.0667A	IP20	View
Mean Well MDS01M-12N SIP Package DC-DC Converter- 1W - 12V Out 83mA	1W	12V	0.0833A	IP20	View
Mean Well MDS01M-05N SIP Package DC-DC Converter- 1W - 5V out 200mA	1W	5V	0 Milliampere	IP20	View
Mean Well MDS01M-03N SIP Package DC-DC Converter- 1W - 3.3V out 303mA	1W	3.3V	0 Milliampere	IP20	View
Mean Well MDS01L-15N SIP Package DC-DC Converter- 1W - 15V Out 67mA	1W	15V	0.0667A	IP20	View
Mean Well MDS01L-12N SIP Package DC-DC Converter- 1W - 12V Out 83mA	1W	12V	0.0833A	IP20	View
Mean Well MDS01L-05N SIP Package DC-DC Converter- 1W - 5V Out 200mA	1W	5V	0.2A	IP20	View
Mean Well MDS01L-03N SIP Package DC-DC Converter- 1W - 3.3V Out 303mA	1W	3.3V	0 Milliampere	IP20	View

Please log in to write a review.

{ "id":9596813312299, "variants" :[{ "context":"default", "variant_id": 49368178065707, "sku":"MDS01N-12N", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }