Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKMW20G-12 DC-DC Converter - 20W - 18~75V in 12V out 1.67A

SKU SKMW20G-12

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SKMW20G-12 is the 12V output model of this series: rated power 20W, typical efficiency 89%.

SKMW20 and DKMW20 series are 20W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 89%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class A without additional components, continuous-mode short circuit, overload, over temperature, input under voltage protection, remote ON/OFF and trimmable output voltage etc. The models account for different input voltage 9~36V and 18~75V 4:1 ultrawide input range, and various output voltage, 3.3V /5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

DIP 1"x1" package with industry standard pinout
4:1 ultrawide input range
Operating temperature range -40 ~ +85℃
No minimum load required
Comply to BS EN/EN55032 radiated Class A without additional components
High efficiency up to 89%
Protections: Short circuit (Continuous) / Overload / Over voltage / Input under voltage
1.5KVDC I/O isolation
Remote ON/OFF control and Triming output (±10%)
3 years warranty

Specifications

SKMW20G-12Specifications from the official datasheet (2024-04-30 edition)

INPUT

INPUT VOLTAGE (RANGE): 48V (18 ~ 75V)
INPUT CURRENT NO LOAD: 8mA
INPUT CURRENT FULL LOAD: 463mA
VOLTAGE RANGE: 18~75Vdc
SURGE VOLTAGE (100ms max.): 24Vin models : 50Vdc, 48Vin models : 100Vdc
FILTER: Pi type
PROTECTION: Fuse recommended. 24Vin models: 3A delay time Type, 48Vin models: 1.5A delay time Type
INTERNAL POWER DISSIPATION: 500mW

OUTPUT

OUTPUT VOLTAGE: 12V
OUTPUT CURRENT: 0~1670mA
EFFICIENCY (TYP.): 89%
CAPACITOR LOAD (MAX.)^{* For each output}: 1650μF
VOLTAGE ACCURACY: ±1.5%
RATED POWER: 20W
RIPPLE & NOISE^Note.2: 3.3/5Vout models: 75mVp-p, other models:100mVp-p
LINE REGULATION^Note.3: ±0.2%
LOAD REGULATION^Note.4: Single output models: ±0.2%, Dual output models:±1%
SWITCHING FREQUENCY (Typ.): 3.3/5Vout models: 270KHz, other models: 330KHz
EXTERNAL TRIM ADJ. RANGE (Typ.): ±10% (Single output model only)

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 110 ~ 170% rated output power Protection type : Recovers automatically after fault condition is removed
OVER VOLTAGE: Protection type : Clamp by diode
UNDER VOLTAGE LOCKOUT Start-up voltage: 24Vin (F-type): 8.8Vdc, 48Vin (G-type): 17Vdc
UNDER VOLTAGE LOCKOUT Shutdown voltage: 24Vin (F-type): 8Vdc, 48Vin (G-type): 16Vdc

FUNCTION

REMOTE CONTROL: Power ON: R.C. ~ -Vin >3.5~75Vdc or open circuit ; Power OFF: R.C. ~ -Vin <1.2Vdc or short

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +85℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.03% / ℃ (0 ~ 60℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 5 sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC (Note.5)

SAFETY STANDARDS: EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 1500pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032(CISPR32) N/A
Radiated BS EN/EN55032(CISPR32) Class A
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line-Line
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 2, 3A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032(CISPR32)	N/A
Radiated	BS EN/EN55032(CISPR32)	Class A

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line-Line
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 2, 3A/m

OTHERS

MTBF: 3.3/5Vout models: 910Khrs, Other models: 1220Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 25.4*25.4*10.2mm (1*1*0.4 inch)
CASE MATERIAL: Black coated copper with non-conductive base
PACKING: 19g ; 12pcs/per tube, 600pcs/50 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(F:24Vdc, G:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 0% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SKMW20G-12 SKMW20 & DKMW20 series — SKMW20 & DKMW20 series

SKMW20G-12 SKMW20 & DKMW20 series (2) — SKMW20 & DKMW20 series (2)

SKMW20G-12 Plug Assignment — Plug Assignment

Typical applications

Downloads

Certificates2

Certificate (SKMW20-DKMW20-CE-dec)(EN) PDF Download

Certificate (SKMW-DKMW20-UK-dec)(EN) PDF Download

Test reports1

Test Report (SKMW20G-12)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SKMW20G-12 to power a 12V industrial control module from a wide input source?

Yes, this model provides a constant 12V output and is rated for 20W with up to 1.67A output current. Its specified input range is 18-75VDC, which suits systems that need 12V output from a broad input span.

Is the SKMW20G-12 suitable for 12V embedded electronics inside compact equipment?

It can be a fit where space is limited because the converter measures 25.4 × 25.4 × 10.2 mm and weighs 19g. The constant-voltage 12V output is intended for loads that require a regulated 12V rail within the 20W limit.

Can this converter support 12V automation accessories that draw less than 1.67A?

Yes, the rated output is 12V at up to 1.67A in constant-voltage mode. That makes it appropriate for 12V automation or control loads that stay within the 20W power rating.

What is the difference between the SKMW20G-12 and the other SKMW20G models?

The SKMW20G-12 is a 20W model with 12V output at 1.67A. In the same series, the SKMW20G-03 is 3.3V at 4.5A, the SKMW20G-05 is 5V at 4A, and the SKMW20G-15 is 15V at 1.33A. All listed siblings are 20W models.

Is the SKMW20G-12 suitable for outdoor or harsh-temperature environments?

Its operating temperature range is -40°C to +85°C, so the temperature specification is broad for demanding environments. However, no IP rating is listed, so enclosure sealing for indoor or outdoor exposure is not specified in the provided specs.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well SKMW20W8-15 20W DC-DC Converter 15VDC 1.33A	20W	15V	1.33A	IP20	View
Mean Well SKMW20W8-12 20W DC-DC Converter 12VDC 1.67A	20W	12V	1.67A	IP20	View
Mean Well SKMW20W8-05 20W DC-DC Converter 5VDC 4A	20W	5V	4A	IP20	View
Mean Well SKMW20W8-03 20W DC-DC Converter 3.3VDC 6.06A	20W	3.3V	6.06A	IP20	View
Mean Well SKMW20G-15 DC-DC Converter - 20W - 18~75V in 15V out 1.33A	20W	15V	1.33A	IP20	View
Mean Well SKMW20G-05 DC-DC Converter - 20W - 18~75V in 5V out 4A	20W	5V	4A	IP20	View
Mean Well SKMW20G-03 DC-DC Converter - 20W - 18~75V in 3.3V out 4.5A	20W	3.3V	4.5A	IP20	View
Mean Well SKMW20F-15 DC-DC Converter - 20W - 9~36V in 15V out 1.33A	20W	15V	1.33A	IP20	View
Mean Well SKMW20F-12 DC-DC Converter - 20W - 9~36V in 12V out 1.67A	20W	12V	1.67A	IP20	View
Mean Well SKMW20F-05 DC-DC Converter - 20W - 9~36V in 5V out 4A	20W	5V	4A	IP20	View
Mean Well SKMW20F-03 DC-DC Converter - 20W - 9~36V in 3.3V out 4.5A	20W	3.3V	4.5A	IP20	View

Please log in to write a review.

{ "id":8442786087211, "variants" :[{ "context":"default", "variant_id": 45712743760171, "sku":"SKMW20G-12", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }