💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well SPU03L-15 DC-DC Converter - 3W - 21.6~26.4V in 5V out

SKU SPU03L-15
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
Available to order
|

Overview

SPU03L-15 is the model of this series: rated power 3W, typical efficiency 86%.

Features

  • 3000VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Protection: Short circuit
  • Cooling by free air convection
  • Non-conductive plastic case
  • Single in line package
  • 100% full load burn-in test
  • Low cost / High reliability
  • 2 years warranty

Specifications

SPU03L-15Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC OUTPUT VOLTAGE
15V
CURRENT RANGE
20 ~ 200mA
EFFICIENCY (Typ.)
86%
RATED POWER
3W
RIPPLE & NOISE (max.)Note.2
50mVp-p
LINE REGULATIONNote.3
±1.2% for 1% input variation
LOAD REGULATIONNote.4
±8.0%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY
60KHz min.

INPUT

VOLTAGE RANGE
4.5 ~ 5.5V
NORMAL VOLTAGE
5V
INPUT CURRENT Full load
705mA
INPUT CURRENT No load
65mA
FILTER
Capacitor type
PROTECTION
Fuse recommended

PROTECTION

OVERLOAD
Momentary Protection type : Broken
SHORT CIRCUIT
Momentary Protection type : Broken

ENVIRONMENT

WORKING TEMP.
-40 ~ +90℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE
80pF max.
EMC EMISSION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B , EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF
700khrs min. MIL-HDBK-217F(25℃)
DIMENSION
19.6*7.5*10.2mm or 0.77"*0.30"*0.40" inch (L*W*H)
PACKING
2.9g ; 25 pcs/per tube, 4000 pcs/ 160 tube/per carton
Test conditions and notes4
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 20% to 100% rated load.

Technical drawings

SPU03L-15 Mechanical Specification
Mechanical Specification
SPU03L-15 Packing
Packing

Downloads

FAQ

Can I use the SPU03L-15 to derive 5V for embedded control electronics from a 21.6~26.4V source?

No, the SPU03L-15 is rated for 4.5~5.5V input and provides a constant 15V output at 3W. That makes it suitable for low-power embedded control, monitoring, or interface sections built around a 15V rail.

Is the SPU03L-15 a fit for 5V logic or signal-conditioning circuits in automation panels?

It is intended for constant-voltage 15V output and has a 3W power rating, which suits low-power logic and signal-processing electronics. The defined input range is 4.5~5.5V, so it should be matched to systems in that range.

Can this model support a small 5V service rail inside industrial instrumentation?

For low-power 15V support circuitry, the 3W output rating is aligned with compact service or housekeeping rails. Its small 19.6 × 7.5 × 10.2 mm size also helps in tightly packed instrumentation designs.

Would the SPU03L-15 work for 5V communication or controller subsections in IT equipment?

No, it is built for a regulated 15V output and accepts 4.5~5.5V input, which fits low-power controller or communication subsections. The converter is a constant-voltage design, so it is intended for electronics that need a stable 15V supply.

Is the SPU03L-15 suitable for exposed outdoor use?

The operating temperature range is -40°C to +90°C, so thermal limits are specified across a wide span. The provided specs do not include an IP rating, which means outdoor dust and water protection are not stated.

What is the difference between the SPU03L-15 and the other SPU03L versions?

The SPU03L-15 is rated 3W with 15V output and listed 200mA output current. In the same series, the SPU03L-05 is 3W with 5V output and listed 600mA output current, and the SPU03L-12 is 3W with 12V output and listed 250mA output current.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442831962411, "variants" :[{ "context":"default", "variant_id": 45712973267243, "sku":"SPU03L-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SPU03L-15 DC-DC Converter - 3W - 21.6~26.4V in 5V out
Mean Well

Mean Well SPU03L-15 DC-DC Converter - 3W - 21.6~26.4V in 5V out

Log in to see price

SPU03L-15 is the model of this series: rated power 3W, typical efficiency 86%.

Features

  • 3000VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Protection: Short circuit
  • Cooling by free air convection
  • Non-conductive plastic case
  • Single in line package
  • 100% full load burn-in test
  • Low cost / High reliability
  • 2 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top