💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SPU03N-12 DC-DC Converter - 3W - 10.8~13.2V in 15V out

SKU SPU03N-12
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

SPU03N-12 is the model of this series: rated power 3W, typical efficiency 86%.

Features

  • 3000VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Protection: Short circuit
  • Cooling by free air convection
  • Non-conductive plastic case
  • Single in line package
  • 100% full load burn-in test
  • Low cost / High reliability
  • 2 years warranty

Specifications

SPU03N-12Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC OUTPUT VOLTAGE
12V
CURRENT RANGE
25 ~ 250mA
EFFICIENCY (Typ.)
86%
RATED POWER
3W
RIPPLE & NOISE (max.)Note.2
50mVp-p
LINE REGULATIONNote.3
±1.2% for 1% input variation
LOAD REGULATIONNote.4
±8.0%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY
60KHz min.

INPUT

VOLTAGE RANGE
21.6 ~ 26.4V
NORMAL VOLTAGE
24V
INPUT CURRENT Full load
150mA
INPUT CURRENT No load
15mA
FILTER
Capacitor type
PROTECTION
Fuse recommended

PROTECTION

OVERLOAD
Momentary Protection type : Broken
SHORT CIRCUIT
Momentary Protection type : Broken

ENVIRONMENT

WORKING TEMP.
-40 ~ +90℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE
80pF max.
EMC EMISSION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B , EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF
700khrs min. MIL-HDBK-217F(25℃)
DIMENSION
19.6*7.5*10.2mm or 0.77"*0.30"*0.40" inch (L*W*H)
PACKING
2.9g ; 25 pcs/per tube, 4000 pcs/ 160 tube/per carton
Test conditions and notes4
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 20% to 100% rated load.

Technical drawings

SPU03N-12 Mechanical Specification
Mechanical Specification
SPU03N-12 Packing
Packing

Downloads

FAQ

Can I use the SPU03N-12 to provide 15V for low-power industrial sensors or interface circuits?

No. The SPU03N-12 is a 12V output converter with a 21.6~26.4V input range. It cannot provide 15V. For a 15V output, you would need the SPU03N-15 model, which has the same 21.6~26.4V input range.

Is the SPU03N-12 a good fit for embedded or automation boards that need a small 15V converter?

No. The SPU03N-12 provides 12V output, not 15V. It fits embedded or automation boards that need a small 12V converter in a 19.6 x 7.5 x 10.2 mm package. The converter is rated for 3W, so it is aligned with low-power embedded or automation functions rather than larger loads. The listed weight is 2.9g.

Can this model be used in equipment exposed to very low or very high operating temperatures?

The specified operating range is -40°C to +90°C. That supports use in control and embedded equipment that sees broad ambient temperature variation. The electrical fit still needs to match its 21.6~26.4V input and 12V, 3W output rating.

Is the SPU03N-12 rated for outdoor exposure?

No outdoor protection rating is listed in the provided specs. The product does specify -40°C to +90°C operation, but there is no IP rating shown for water or dust resistance. Based on the available data, temperature performance is specified while ingress protection is not.

What are the differences between the SPU03N-12 and the other SPU03N versions?

The SPU03N series includes different output voltages. The SPU03N-05 is 5V, the SPU03N-12 is 12V, and the SPU03N-15 is 15V. All are 3W models with a 21.6~26.4V input range. They share 19.6 x 7.5 x 10.2 mm dimensions, -40°C to +90°C operating range, and a 2-year warranty.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442832748843, "variants" :[{ "context":"default", "variant_id": 45712976773419, "sku":"SPU03N-12", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SPU03N-12 DC-DC Converter - 3W - 10.8~13.2V in 15V out
Mean Well

Mean Well SPU03N-12 DC-DC Converter - 3W - 10.8~13.2V in 15V out

SPU03N-12 is the model of this series: rated power 3W, typical efficiency 86%.

Features

  • 3000VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Protection: Short circuit
  • Cooling by free air convection
  • Non-conductive plastic case
  • Single in line package
  • 100% full load burn-in test
  • Low cost / High reliability
  • 2 years warranty
View product