Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SRS-1212 is the 12V output model of this series: rated power 0.5W, typical efficiency 60%.
Features
- 1500VDC I/O isolation
- Internal SMD technology
- Built-in EMI filter
- Cooling by free air convection
- Non-conductive plastic case
- Dual in line package
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 12V
- CURRENT RANGE
- 0 ~ 42mA
- EFFICIENCY (TYP.)
- 60%
- RATED POWER
- 0.5W
- RIPPLE & NOISE (max.)Note.2
- 100mVp-p
- LINE REGULATION
- ±1.0%
- LOAD REGULATIONNote.3
- ±1.0%
- VOLTAGE ACCURACY
- ±2.0%(Typ.) ±3.0%(max.)
- SWITCHING FREQUENCY
- 50KHz min.
INPUT
- VOLTAGE RANGE
- 10.8 ~ 13.2V
- NORMAL VOLTAGE
- 12V
- INPUT CURRENT Full load
- 72mA
- INPUT CURRENT No load
- 15mA
- FILTER
- Capacitor type
- PROTECTION
- Fuse recommended
PROTECTION (Note. 4)
- OVERLOAD
- 150 ~ 350% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
- WORKING TEMP.
- -25 ~ +71℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -25 ~ +105℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃(0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
- ISOLATION CAPACITANCE
- 80pF max.
- EMC EMISSION
- Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020
OTHERS
- MTBF
- 600khrs min. MIL-HDBK-217F(25℃)
- DIMENSION
- 22.6*9.9*8.9mm or 0.89"*0.39"*0.35" inch (L*W*H)
- PACKING
- 3.1g ; 22pcs/per tube, 3080pcs/140 tube/per carton
Test conditions and notes4
- 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 3.Load regulation is measured from 10% to 100% rated load.
- 4.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Technical drawings
Downloads
FAQ
Can I use the SRS-1212 to maintain a regulated 12V rail from a 10.8~13.2V source in industrial electronics?
Yes, it is specified for 10.8~13.2V input and provides a constant 12V output. Its 0.5W rating and 0.04A output current make it suitable for low-power industrial or embedded support rails rather than higher-current 12V loads.
Is the SRS-1212 a good fit for small automation, PLC-adjacent, or monitoring circuits that need light 12V power?
It can fit those low-demand applications when the load stays within 0.04A at 12V and within the 0.5W limit. The constant-voltage output is better matched to auxiliary electronics than to larger actuators or other heavier 12V devices.
Can the SRS-1212 be used in tightly packed embedded assemblies?
The module measures 22.6 × 9.9 × 8.4 mm and weighs 0.0031 kg, so it is intended for compact board-level designs. That makes it practical where a small regulated 12V rail is needed from a 10.8~13.2V input window.
Is the SRS-1212 suitable for indoor-only use, or can it go outdoors?
The published operating range is -25°C to +71°C, but the provided specs do not include an IP rating. On that basis, it is better aligned with protected indoor assemblies or sealed equipment interiors than direct outdoor exposure.
How does the SRS-1212 compare with the rest of the SRS series?
The sibling list keeps all models at 0.5W, but the available outputs are 5V, 9V, 12V, and 15V with different listed currents. The listed group is SRS-0505, SRS-1205, SRS-2405, and SRS-4805 at 5V with listed 100A; SRS-0509, SRS-1209, SRS-2409, and SRS-4809 at 9V and 0.06A; SRS-0512, SRS-1212, SRS-2412, and SRS-4812 at 12V and 0.04A; and SRS-0515, SRS-1215, SRS-2415, and SRS-4815 at 15V and 0.03A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SRS Series Models
15 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.






