Over 15 years experience of providing support of MEAN WELL Power Supplies
The SRS is a 0.5W Mean Well power converter.
Key Features
- ✓ 1KVDC reinforced I/O isolation
- ✓ Protections: Short circuit / Overload
- ✓ Safety approvals: WITHSTAND VOLTAGE ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION WEIGHT -25 ~ +105 ± 0.03% / ℃ ℃ , 10 ~ 95% RH ℃ ) (0 ~ 50 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes EAC TP TC 004
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesSRS Series
-
Power Rating0.5 Watt
-
Output Voltage5 Volt
-
Rated Current0.1 Ampere
-
Input Voltage21.6V~26.4V
-
Standards MetCE,EMC,FCC
-
Operation ModeConstant Voltage
-
Operating Temperature-25°C~71°C
-
Warranty2 Year
-
Length2.26 cm
-
Width0.99 cm
-
Height0.84 cm
-
Weight0 kg
::specification::
Frequently Asked Questions
Can I use the SRS-2405 to generate 5V logic power from a 24VAC control circuit?
Yes, this model is intended for applications that need a constant 5V output from a 21-26VAC input range. It is best matched to low-power logic or control electronics within its 0.5W output rating.
Is the SRS-2405 a fit for powering a small embedded controller section from 24VAC?
It can fit a small embedded controller section if that section only needs a very light 5V rail and the source is 21-26VAC. The output is fixed at 5V and the total converter power is 0.5W, so it is intended for low-demand electronics rather than broad system loads.
Can the SRS-2405 be used in an automation panel for a 5V interface circuit?
It is suitable for a 5V interface or auxiliary logic circuit in an automation panel when the available input is 21-26VAC. Its 22.6 x 9.9 x 8.4 mm package also helps where space is tight in compact control hardware.
Would this converter make sense for a low-power 5V monitoring or sensor-support circuit?
Yes, it can be used for a low-power 5V monitoring or support circuit fed from 21-26VAC. Because the unit is rated at 0.5W and uses constant-voltage output, it is best for light electronics rather than larger sensor groups or higher-load devices.
Can the SRS-2405 be used outdoors or in unprotected locations?
The operating temperature range is -25C to +71C, which defines the thermal limits. However, no IP rating is listed, so there is no stated ingress-protection basis for exposed outdoor placement, making protected indoor enclosures the safer use case.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SRS Series Models
15 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.




