💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SRS-2415 DC-DC Converter - 0.5W - 21.6~26.4V in 15V out

SKU SRS-2415
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

SRS-2415 is the 15V output model of this series: rated power 0.5W, typical efficiency 60%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty

Specifications

SRS-2415Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE
15V
CURRENT RANGE
0 ~ 34mA
EFFICIENCY (TYP.)
60%
RATED POWER
0.5W
RIPPLE & NOISE (max.)Note.2
100mVp-p
LINE REGULATION
±1.0%
LOAD REGULATIONNote.3
±1.0%
VOLTAGE ACCURACY
±2.0%(Typ.) ±3.0%(max.)
SWITCHING FREQUENCY
50KHz min.

INPUT

VOLTAGE RANGE
21.6 ~ 26.4V
NORMAL VOLTAGE
24V
INPUT CURRENT Full load
36mA
INPUT CURRENT No load
9mA
FILTER
Capacitor type
PROTECTION
Fuse recommended

PROTECTION (Note. 4)

OVERLOAD
150 ~ 350% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT
All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.
-25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃(0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE
80pF max.
EMC EMISSION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020

OTHERS

MTBF
600khrs min. MIL-HDBK-217F(25℃)
DIMENSION
22.6*9.9*8.9mm or 0.89"*0.39"*0.35" inch (L*W*H)
PACKING
3.1g ; 22pcs/per tube, 3080pcs/140 tube/per carton
Test conditions and notes4
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Load regulation is measured from 10% to 100% rated load.
  4. 4.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

SRS-2415 Mechanical Specification
Mechanical Specification
SRS-2415 Packing
Packing

Downloads

FAQ

Can I use the SRS-2415 for a low-current 15V rail in a 24VAC automation system?

Yes, it is suitable for generating a fixed 15V rail from a 21-26VAC source in low-power automation electronics. The output is limited to 15V at 0.03A and 0.5W, so it is intended for light auxiliary circuits rather than larger 15V loads.

Is the SRS-2415 suitable for a compact 15V instrumentation circuit?

It can be suitable for a compact 15V instrumentation circuit when the circuit only needs a small constant-voltage supply from 21-26VAC. The low 0.03A output current makes it a fit for light-duty analog or reference sections rather than heavier modules.

Can this converter support a 15V embedded interface stage powered from 24VAC?

Yes, it can support a 15V embedded interface stage if the source is within 21-26VAC and the load stays inside the 0.5W rating. Its small 22.6 x 9.9 x 8.4 mm package is also useful where board space is constrained.

Would the SRS-2415 work for a small 15V bias supply in control electronics?

It can work for a small 15V bias or support supply in control electronics when only 0.03A is required. Because it provides constant voltage, it is intended for circuits that need a stable 15V rail rather than variable-output applications.

Is the SRS-2415 rated for outdoor or dirty industrial environments?

The spec sheet gives an operating temperature range of -25C to +71C, so temperature capability is defined. No IP rating is listed, so the provided data does not establish suitability for exposed outdoor, wet, or dusty locations, which points toward protected enclosure use instead.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442840940843, "variants" :[{ "context":"default", "variant_id": 45713023861035, "sku":"SRS-2415", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SRS-2415 DC-DC Converter - 0.5W - 21.6~26.4V in 15V out
Mean Well

Mean Well SRS-2415 DC-DC Converter - 0.5W - 21.6~26.4V in 15V out

SRS-2415 is the 15V output model of this series: rated power 0.5W, typical efficiency 60%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty
View product