Over 15 years experience of providing support of MEAN WELL Power Supplies
Mean Well SRS-4805 DC-DC Converter - 0.5W - 43.2~52.8V in 5V out
Log in to see priceOverview
SRS-4805 is the 5V output model of this series: rated power 0.5W, typical efficiency 60%.
Features
- 1500VDC I/O isolation
- Internal SMD technology
- Built-in EMI filter
- Cooling by free air convection
- Non-conductive plastic case
- Dual in line package
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 5V
- CURRENT RANGE
- 0 ~ 100mA
- EFFICIENCY (TYP.)
- 60%
- RATED POWER
- 0.5W
- RIPPLE & NOISE (max.)Note.2
- 100mVp-p
- LINE REGULATION
- ±1.0%
- LOAD REGULATIONNote.3
- ±1.0%
- VOLTAGE ACCURACY
- ±2.0%(Typ.) ±3.0%(max.)
- SWITCHING FREQUENCY
- 50KHz min.
INPUT
- VOLTAGE RANGE
- 43.2 ~ 52.8V
- NORMAL VOLTAGE
- 48V
- INPUT CURRENT Full load
- 19mA
- INPUT CURRENT No load
- 5mA
- FILTER
- Capacitor type
- PROTECTION
- Fuse recommended
PROTECTION (Note. 4)
- OVERLOAD
- 150 ~ 350% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
- WORKING TEMP.
- -25 ~ +71℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -25 ~ +105℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃(0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
- ISOLATION CAPACITANCE
- 80pF max.
- EMC EMISSION
- Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020
OTHERS
- MTBF
- 600khrs min. MIL-HDBK-217F(25℃)
- DIMENSION
- 22.6*9.9*8.9mm or 0.89"*0.39"*0.35" inch (L*W*H)
- PACKING
- 3.1g ; 22pcs/per tube, 3080pcs/140 tube/per carton
Test conditions and notes4
- 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 3.Load regulation is measured from 10% to 100% rated load.
- 4.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Technical drawings
Downloads
FAQ
Can I use the SRS-4805 to power a small 5V monitoring or control circuit inside 48V industrial equipment?
Yes, this model is suited to low-power 5V constant-voltage circuits when the available input is within 43.2 to 52.8V. Its rated power is 0.5W, so it fits lightweight monitoring, control, or embedded interface loads rather than higher-power devices.
Is the SRS-4805 appropriate for embedded 5V logic in telecom or automation hardware that runs on a 48V bus?
It is intended for applications that need a 5V constant-voltage output from a 43.2 to 52.8V input range. With a 0.5W rating and compact 22.6 x 9.9 x 8.4 mm package, it fits space-limited embedded boards and auxiliary logic sections.
Can this converter be used for a low-power 5V sensor or feedback stage in industrial controls?
It can work for low-power 5V sensor or feedback circuitry if the source falls within 43.2 to 52.8V and the total load stays within 0.5W. The constant-voltage output makes it a better match for regulated electronics than for variable-load power functions.
Is the SRS-4805 suitable for outdoor or harsh-environment use?
The listed operating temperature is -25°C to +71°C, which supports a wide equipment temperature range. No IP rating is listed, so it is better treated as a converter for protected indoor enclosures rather than exposed outdoor locations.
How does the SRS-4805 compare with the other 48V-input SRS models?
Within the 48V-input group, all models are rated at 0.5W and share the same 43.2 to 52.8V input range. The difference is output: SRS-4805 is 5V and 100A, SRS-4809 is 9V and 0.06A, SRS-4812 is 12V and 0.04A, and SRS-4815 is 15V and 0.03A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SRS Series Models
15 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
